Enid_Puceflange

It’ll be coming apart- AGAIN 🤦🏻‍♂️

Yeah, It’s an ngrs They have a pretty weak recoil, more like a mild vibration when shooting 😂 But certainly more soul than a standard aeg (nothing like TM’s other M4 versions) Still work to do on the hop unit A 30% chance of hitting a target at 30m just now which is USELESS this is after a fresh hop rubber I put circa 700 rounds through it yesterday hoping it would bed in Funny thing is, it seems more consistent on full auto 🤷🏻‍♂️

A properly frosty game on site today Still, not satisfied with my hop & accuracy But being able to hit something is only really 20% of what matters when you love the way it looks 😂

It’s ALIVVVVE https://youtu.be/t_8R9gjOqFc

If it’s polymer, I’d be tempted to try the dots on it A small drill 3mm or so and a small “dimple” made with a dremmel etc Then fill the dimples with a red enamel paint from humbrol or tamiya You only need to go .5 - 1mm deep

If the screws are stripped, yes If it’s the holes threaded on the gearbox/receiver, not as

The Desert DPM works exceptionally well with the fallen foliage at this time of year looks cool

This seasons winter pew Now all I need to do is try and get a game in 🤦‍♂️

Bloody Hell That arrived quick!! Not due for another 3 weeks at least!! Feels lovely, great colour finish Will get a pic of it mounted later before Mrs P wants it wrapped under the tree 😫

Yeah, I suppose that’s a possibility. The Chrono reading is what I would expect for a non tampered with TM anyway, so I’m comfy that it’s pretty healthy overall. It was chucking .28’s down range last week no bother, just no good accuracy at long range. Hopefully the fresh rubber will see to that Fps wise, I’m not going to tamper with it any more Im a firm believer in the TM fairy’s 🧚

Yes, I made sure the bucking was as far forward as the original was to ensure it was getting a good seal with the nozzle Maybe - hopefully, the nozzle and bucking just need to “bed in” together 🤷🏻‍♂️

Not tested it on my ideal for it which will be .28’s

Update: Took it apart again earlier, discovered that in my laziness at disassembly, I had merely loosened the six screws at the hop end of the external barrel, to allow me to free the internal & hop unit What I hadn’t realised is there is a tab on the side of the hop unit that slots inside the external barrel. So the hop unit was sitting maybe 1cm further back than it should have been. Therefore , it couldn’t feed as the nozzle was protruding into the hop assembly too far and stopping beebs from feeding Doesn’t explain how the fcuk I managed to get 3/4 shots through it before it stopped feeding previously 🤷🏻‍♂️ Anyway, now shooting .2’s at mid 280’s fps (was previously just below 300 with standard worn rubber) Will fps climb a touch as the rubber beds in? 🤞 this was read with minimum hop applied

Yup The walls are covered in RIF’s, all done in manufacturers groups decent selection I was blown away when I went in And you are right about LW I think they are aiming at just being an online retailer

Aye, But you ain’t the next owner 😂

On your way down the road, you have…… Kingdom of Airsoft. - in Dundee Airsoft World - just outside Glenrothes Pop down with @Hawkkw (Mark Fordyce) for a game with us at Enemy Down 👍

I think your issue was pretty well covered on your Facebook rant I think you started off in the wrong foot with the retailer by asking about returning faulty valves before they arrived? That would have had my spidey senses tingling from the offset, trying to figure out your intentions and if they were possibly fraudulent (however innocent it would appear to you) They cancelled your order, quite possibly to save them hassle Reserved the right to refuse service As shite as it seems to you, you aroused suspicions, and they just blew you out! Ill be honest I haven’t had an issue with them, if parts are in stock I get them pretty quickly And was refunded when THEY noticed (not me) that I had ordered the wrong part for my rif. That shows a decent level of attention to detail on their part Just don’t message them at Dark O’clock and you’ll be ok

Could it be part 33 you are missing?

We’ve had a couple of players who are waiting to get their third game in and register their ukara with us. They have bought guns and agreed to collect them from the store when they have their ukara Might be worth a phone call to see if you can buy now, while the sales on, then give them your ukara and get it then? (Non two-toned)

Thanks folks i shall get back into it during the week No components were left on the table, but may have put the spring and spacer in back 2 front

Yeah, My standard practice when a new arrival comes in is to remove the barrel and hop and give it all a good clean Barrel was cleaned with isopropyl, the rubber in it when it arrived was swimming in silicon 🙄 So after cleaning all of that, it was placing out to 50m, but no real accuracy (50% hit rate on a torso sized target) I had hoped changing the rubber would help, but obviously I havent got something right whilst reassembling

Yeah, I believe so? 🤔 i had it apart last week to see what condition the rubber was in Everything was swimming in silicon oil, so I have managed to reassemble it and it fired better last week Looks like I should just get it apart again and re assemble without a beer Are they sensitive to different brands of rubber? should I stick to a TM? (the one fitted was laying around in a spares box)

Oh dear My recently arrived (bought used) Tm Scar was shooting a bit erratically, fps was spot on for a standard gun at just below 300 on a .2 but shots were pretty disappointing at range, like inaccurate at 40m So, Ive changed the hop rubber first couple of shots were at circa 270 Then it dropped to the 250’s Wtf could I have done? it all went back together no bother I used a G&G turquoise rubber Its a very tight fit on the barrel and into the hop unit The only thing I can think of is a crap seal with the nozzle But it also stopped feeding beebs into the hop unit Given up for the evening as it took a good couple of hours to do it so shall investigate during the week when my will power returns 🤦‍♂️

And one of the heaviest

Awwww fcuk it I bit the bullet (well Mrs P said Santa could get me it) Got a SpectreDr on the way Should arrive From Ali Exp, just in time for Xmas 👌