Chev Chelios

You have not even been yet? Would wait to buy more than the mandatory protection until you have been at least once, some people don't mind being shot in the dick, you could be a dick shot enjoyer and not even know it.

ULoop from BFG or a derivative is my go to (basically a HK clip that will not bite you and is silent). When buying QDs buy the "anti rotation" versions (so they cant just spin in the cup) and match materials otherwise the steel item will eat the aluminium one rather quickly. Angry Gun make a nice oxide finished stainless steel swivel and is nicer than the "reel steel" BFG ones I got from Tactical Kit. I have no experience with the replica you are using and if its cup for the QD is out of spec put you can take a hammer and punch and add indents to it so it will stop the swivel you have from popping out without being depressed. Just keep checking for sizing as you go.

If you had a massive cock and balls maybe (so its fine for me) they are made with MMA in mind so work well in all sorts of positions.

Shock Doctor 329 Jockstrap. I was surprised how comfortable they are. Wore it for 8 hours to "bed it in" and I forgot it was on. Can remove and fit the protective insert while wearing the Jockstrap so doubles as a gas mag worming pouch in the winter between games

Oh. Anonymoose trying to match volume to prevent suck back, you telling him to "suck it and see".

I got the joke

PTT https://www.aliexpress.com/item/1005005795960736.html? and the downlead https://www.aliexpress.com/item/1005006922921754.html? (should of come with the FCS Amps).

I have tried both FCS offerings and are OKish and will work but the UH94 (modal in image) I have for the NATO down lead works best. JCI coms is a good dude and will sort you out. You can find him here https://www.facebook.com/groups/1687000848242078 also a goldmine for this sort of stuff.

On the ilk of making your own, Milspec Monkey has a good vid https://www.youtube.com/watch?v=X_4_5ZN09u8&ab_channel=MIL-SPECMONKEY

I apologise to Gavin to, for my general lack lustier, abhorrent spelling, grammar and guttural like sense of hummer. Sorry Gavin!

Are they classed as using "fraggable" projectiles like Paintball guns I wonder, but would being able to fire full auto negate that or cane they point to other types of gun ref projectile size. Could also fire projectile's other than Paintballs so not sure about that point. As you say the hole thing is just PR and until it benefits nobody cares. The rules on Airsoft guns are silly when anyone over the age of 18 can rock up and buy an Air Gun that looks 100% like an Airsoft Gun or just buy an IF and spray it. I just thank God Hazel Blears got fucked off or we would all be speed softers right now

As Tackle says plate bags are a bit naff and the osprey being not just plate bags but also designed to carry soft armour panels as well makes it super naff. If you also have big boobs its just not gonna work well. I would recommend a split front chest rig like the TT MAV or Flektarns rip off https://www.flecktarn.co.uk/sdtmb2nx.html it can be worn as a chest rig or belt kit and being a split front super easy to don and doff with huge amounts of adjustment. Chuck some 7.62 pouches for your AK mags on and you should be good to go. Ref your AK, does it have a solid stock? If it does its worth looking at adjustable stocks so you can fit the LOP (length of pull) better to you. Another option if not a die hard AK head the MP5 is a favourite of my tiny 13 year old niece when combined with a good sling will run around happily all day with it.

Most likely so :). If it was me I would buy a fake one (can find them on AliExpress for like £20) and see if I could scavenge replacements from that.

GHK pen loader works well, as does the auto bot. Found a vid and ended up doing it to my M4 mags think the Glock will get the same treatment aswell when I can get around to it. https://www.youtube.com/watch?v=DH0VaIF408s&ab_channel=CoolDown

At the bottom of the battery compartment is a leaf spring or a rubber bumper with two springs in . Yank it out with something pointy pointy sticky sticky, give it a clean with alcohol (some good 90% isopropyl stuff) and ether give the leaf spring a slight ben toward the sight or the two smaller springs a slight stretch. Then pull the rubber bumper off the sight side remove the two metal plugs and springs and do the same (will need some form of adessive to stick the bumper back on under the emitter) If that fails its the electronics and the older modals are no longer supported and would cost more to fix than buy a new one most likely. Eotech did a guide it seems https://www.youtube.com/watch?v=Eued-5m1zR8&ab_channel=EOTECH

“What colour is the boat house at Hereford”

17 Gen 5 MOS was like 4% of sales I was reading. As you say 45s are just selling like hot cakes in all but California (for obvious reasons) until the law is changed Gen 3 still going to outsell just about everything else.

A sixth month community order? Fuck me people are getting prison time for hurting words on the internet.

Looks like TM might of just been ahead of the curve https://us.glock.com/en/discontinued-models G17 MOS – Gen4 | Gen5 is already discontinued

Z-Bolt duel tail cap came in the mail. My front end OCD is at peace. I need to stay out of this thread to much influence to buy stuff. Edit: FFS under flash the light mount and hand stop are a different shade of Anodising. Back to the drawing board

Don't see much Flecktarn around much these days, works really well in the images. Welcome to the party.

CRYE Gen 1s with the massive shit flap zip. Used to play a game of how many you could unzip with out being noticed in the briefing. :). Could go through 20k BBs running a STAR plastic M249 and only spend £20

In my experience adding a metal slide to a TM gun is a downgrade. I am the wrong person to ask after using the GHK I would never use a Glock with a hammer again

If you have 5 mins spare any chance you can fill this form in https://4uadsmartairsoft.com/report_and_data/ to ask them to produce a version of the "4UANTUM MAGNUS PRO PRECISION AR HOP UP CHAMBER" compatible with the GDR15 please. Have been using one in my GHK and its head and shoulders above anything else on the market. Info vid https://www.youtube.com/watch?v=G6iE3FbTBx4&t=1698s&ab_channel=4UADSmartAirsoft Also good resource https://nazebes.com/category/aeg/gdr15 in Japanese but goggle translate works well. Shows piston rack change, parts upgrades ETC.