-
Posts
8,828 -
Joined
-
Last visited
-
Days Won
440 -
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Rogerborg
-
Torp quatily mortor arivvad!
- Show previous comments 5 more
-
Phew, lucky guess. It's going in a JG G36, and I'm not fussed about ROF so much as semi-auto response and being able to reliably pull the piston past a lock-up: I've had a couple of lock ups where the spring was almost fully compressed and the stock mortor just wouldn't pull it that final tooth.
And yup on the diode, I already have an SB260 in all my mortors will be swapping it over.
-
keep the JG motor (O-type pinion)
and if/when the 140 arm gives out
swap it all over & use the JG arm
which they say is a 22tpa
certainly has a little bit more performance
than std Cyma/G&G stock motors
it was just the weak ferrite magnets holding it back on lock up
when you just don't have the raw grunt the motor stalls
and fuses blow or there is a really BIG spark at switch contacts
when the switch re-opens
The spark or arcing isn't from the motor starting but flyback inductive energy when you release/open switch
on a stalled motor this spark really increases when switch opens
(on std non-mosfet setup or on mosfet this flyback can kill certain uprotected mosfets)
the schottky diodes snub the inductive spikes
but they nick 0.5v schottky to up to 1v for other diodes
so there is a trade off for circuit protection it seems
fucking annoying a little bit more thought isn't used in these peew peew's - but just slapped together and shipped out the door with no consideration at all.
in the geeky electronics world they would be mortified at running motors without a snubber diode & often they would lean to a capacitor & resistor method to quench the spark
I glanced at some of it & just thought it is way way too geeky for me
nah fuck it I'll just use the ICS method at some motors or splice it in on the motor wires on SHS/G&G types as close to motor as possible & leave it at that
Good choice as i said - best of the 3 BD motaaaaa's imho
-
[Fits to gnu]
<not-bad.png>
That's worth £20, I reckon.
[Edit]
"there is a really BIG spark at switch contacts when the switch re-opens"
Yup, I just had to clean up the contacts after what can't be more than 5,000 rounds, thus adding the diode.