PopRocket123

My partner tries to be interested bless her but I can see her eyes start to glaze over after a minute or so.

"Hence the bargain price" 😂😂😂 Even with all the upgrades I wouldn't pay that much even if he hadn't broken the lower receiver

I bet I could print one of those from polycarbonate it'd be almost as strong as the aluminium one

I figured the breast way would just be a bit of work to the stock parts but I've got no experience with trigger components and the first time I try something I generally screw it up.

Except he didn't build it. He payed a tech with a bad reputation to do it for him. If it's been used so little and is being sold at such a loss I can only assume it's fucked and whatever work has been done to the gearbox is going to need to be undone alone with a few replacement parts, most likely the piston. The mags and batteries included also tell me this was built for skirmishing.

I picked up these a little while ago as I don't get on with the normal tacos. They work the same but the rubber material holds onto the mag better and holds its shape more so it's easier to put the mag back in. I've seen them used with all sorts of calibers, even .308 or 2 9mm mags although you can get ones specifically for these mags.

Are there any drop in trigger units that improve the trigger press and aren't shit? I know about the G&P one but pretty much every time I see them mentioned on here it's someone complaining about issues with it. the two main things putting me off getting an MWS (besides being poor)are the trigger press and not being able to find any info on whether or not it will work with a folding stock adapter.

So it's boneyard. Doesn't matter what's in it if you're selling a gun that is missing vital parts that's a boneyard gun.

The upper is a 416 and the lower is a generic M4, all internals have been replaced with moderate upgrades and it hasn't been to a game since being "upgraded". £50 says that thing doesn't even shoot. *Edit* Wait he payed extra for the downgrade according to the invoice but on the list of parts there's an M120 spring.

You don't need any more reason than that

Not sure if it'll fit with the look you're going for but I've got plans to use one of these for a sci fi/post apocalyptic loadout some day. With a bit of weathering I bet it'd look mint

Don't. I've already got one fully 3d printed gun in the works and that's being a bigger ball ache than expected. This was just to check the proportions.

It's so nearly there...

Just went back and checked. On an 11.1vyou can use a 22tpa motor and 18:1 gears for a safe rof. He had to replace the gears for SHS 18:1s though as the stock gears were crap.

Not if you use the higher ratio gears. A high torque motor and 13:1 gears running off a 7.4v lipo is good for around 25rps

A high speed motor turns faster, a high torque motor turns slower but has more turning power so you need gears to match. The stock gears are either 18:1 or 16:1, which would be high speed or balanced gears. For a high torque motor you want to pair it with 13:1 gears for a snappy trigger response otherwise it'll feel laggy.

If you're going to get the high torque it'd also be worth switching to lower ratio gears.

That doesn't surprise me, the honey Badger motor is shit. Pretty sure my dad used a 22tpa SHS motor to upgrade my mates gun.

I wasn't convinced by the WAS Universal Holster until I got one for my USP-C. Honestly it's one of the best options out there. With little or no adjustment it'll fit most pistols and it feels completely secure. I also haven't had any issues with scarves from it, though you'll still probably get wear on a metal pistol.

Thanks. How easy is it to swap out the inserts? I was going to have multiple sets of inserts with a single rig for my 9mm and .308 guns

I've never liked T1s. The main thing is I'm wanting to keep it more like a classic British armed police/SAS setup, hence the specific options.

If it makes you feel any better it's currently boneyard as the lower is a different make and doesn't fit to the upper. When it's working it's getting either an eotech or aimpoint M2 although I can't decide which yet.

Cheaper than a lot of equivalent machine pistol/SMGs on the market. I mean compare that to ~£300 for the PP2000

3 of my primaries. Missing are my spare M4 and the M249. They all still need work.

How is the viper chest rig? I'm after a cheaper alternative to buying a new WAS panel for each of my guns. In anticipation of eventually getting back on the field and hopefully getting my M249 up and running, I have become very aware of my skinny arms. So I've got myself a set of weights in the hopes that it'll last longer than half the first game 😂