Sign in to follow this  
Followers 0
Cam-the-airsoft-sniper

M4 DMR

79 posts in this topic

I have reached a desesion... I want to make my M4 (GR16) Into a DMR.

Now, Can some one (Marksman) Tell me what are the most important parts. I want to keep the costs below £100 ATM but later I will increase the budget (Christmas!) I know I will need a new hop-up and barrel. The FPS is fine at 344 for combat south so that is fine, The blue on my gun will be covered by scrim of something. I don't want a REALLY long gun.

 

Thanks!

 

Cam.

Share this post


Link to post
Share on other sites

King arms 250mm suppressor £25

Madbull Python 6.03 650mm length £40

Madbull blue rubber £15

 

job's easy to do, it's straight forwards what to do with those parts and I got phenominal performance from a JG S-System doing 300 with that sestup.

Share this post


Link to post
Share on other sites
King arms 250mm suppressor £25

Madbull Python 6.03 650mm length £40

Madbull blue rubber £15

 

job's easy to do, it's straight forwards what to do with those parts and I got phenominal performance from a JG S-System doing 300 with that sestup.

My Hop-Up is plastic though, I thought Metal Hop-ups produced the best proformace. Also How damn long will my M4 end up being? Can I Use a shorter barrel?

Share this post


Link to post
Share on other sites

about 5cm longer than an M16 IIRC

 

plastic hop up's are fine, if it breaks, replace it. If not, dont worry.

 

yeah you can use a shorter barrel, but that is waht I used to great effect.

Share this post


Link to post
Share on other sites
about 5cm longer than an M16 IIRC

 

plastic hop up's are fine, if it breaks, replace it. If not, dont worry.

 

yeah you can use a shorter barrel, but that is waht I used to great effect.

 

But going from M4 size to M16 with a massive silencer!

Share this post


Link to post
Share on other sites

erm you will need a shorter barrel or a bigger silencer.the g&g barrel is 345mm long so putting a 650mm barrel in and a 250mm silencer the barrel will stick out 4.5cm

Share this post


Link to post
Share on other sites
Barrel length doesn't mean much in airsoft,

Cam, ill write a proper reply tomorrow I cba to do it now

Thanks, can't wait! lol

Share this post


Link to post
Share on other sites

well, the fps is good, no need to get it higher :)

@Joshcoswin- I m fairly sure the gr16's barrel is longer than that, the inner is 357mm

 

I'd get a tghtbore- 6.03, prometheus or pdi are the best

Depending on if you want a silencer or not go for itand have the inner barrel through that, if not dont.

 

New hop rubber, guarder clear, madbull blue, prometheus purple are all good ones (i like guarder clear)

 

How far do you want to go with this? Because if u want to go further, a high torque motor and gearset would be good and a high voltage battery for trigger response

Share this post


Link to post
Share on other sites
well, the fps is good, no need to get it higher :)

@Joshcoswin- I m fairly sure the gr16's barrel is longer than that, the inner is 357mm

 

I'd get a tghtbore- 6.03, prometheus or pdi are the best

Depending on if you want a silencer or not go for itand have the inner barrel through that, if not dont.

 

New hop rubber, guarder clear, madbull blue, prometheus purple are all good ones (i like guarder clear)

 

How far do you want to go with this? Because if u want to go further, a high torque motor and gearset would be good and a high voltage battery for trigger response

I just want good range and accuracy, The trigger responce is pretty good anyway.

 

Edit: Ok, I have: Madbull V.2 509mm, Madbull blue hop up. can Any one find a silencer that will go over it. Preferably on action hobbies

Share this post


Link to post
Share on other sites

cool just do this bit then:

 

I'd get a tghtbore- 6.03, prometheus or pdi are the best

Depending on if you want a silencer or not go for itand have the inner barrel through that, if not dont.

 

New hop rubber, guarder clear, madbull blue, prometheus purple are all good ones (i like guarder clear)

Share this post


Link to post
Share on other sites
cool just do this bit then:

 

I'd get a tghtbore- 6.03, prometheus or pdi are the best

Depending on if you want a silencer or not go for itand have the inner barrel through that, if not dont.

 

New hop rubber, guarder clear, madbull blue, prometheus purple are all good ones (i like guarder clear)

 

I had the see through GR16 and it already has a really good G&G cold resistant green hop up rubber in there

Share this post


Link to post
Share on other sites

probably does, and I dont doubt it

but I also believe that you can probably improve on it too.

 

Unfortunately for me i have spent a lot of time with g&g m4's and Im sure you can get more range out of them with decent parts

Share this post


Link to post
Share on other sites
probably does, and I dont doubt it

but I also believe that you can probably improve on it too.

 

Unfortunately for me i have spent a lot of time with g&g m4's and Im sure you can get more range out of them with decent parts

 

Yeah, I have recently sold my GR16 due to the number of problems like trigger contacts etc.

Share this post


Link to post
Share on other sites
Yeah, I have recently sold my GR16 due to the number of problems like trigger contacts etc.

 

Well mine is fine :P So what do people think of my shopping list?

Share this post


Link to post
Share on other sites
Oh, wait then lol.

 

Looks good

Still don't know what silencer I need :/

Share this post


Link to post
Share on other sites
Still don't know what silencer I need :/

 

It wouldn't let me edit it :/

 

Right.. Net question: No place has any 363mm M4 barrels so would putting in a 300mm Python 6.03 make the range worse or make any differace?

Share this post


Link to post
Share on other sites

Isn't the barrel already 247mm?

Share this post


Link to post
Share on other sites
Isn't the barrel already 247mm?

Wrong link, check it again, lol

Share this post


Link to post
Share on other sites

Do you want a silencer?

 

get the blue hop rubber, a tightbore.(prommy/pdi, madbull if you have to), if yiu want a silencer thrn get one to cover up the Inner

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0