Jump to content

All Activity

This stream auto-updates

  1. Past hour
  2.    LMKipper reacted to a post in a topic: scammer
  3.    Rogerborg reacted to a post in a topic: Macks airsoft dreamers of the week thread
  4.    glockkidd reacted to a question on an advert: Tokyo Marui Recoil M4 SOPMOD Next Gen Recoil AEG
  5. Fergus66
    Hi, is the folding stock easy to fit ? Many thanks
  6. Socks
    When was this originally purchased and what part number is it?
  7. Socks
    Yeah I thought so too, 99% sure you should only be able to change the gas piston not the other thing??? I'm pretty sure these come with the spring and guide if this is a complete kit? Confusing. I know W&S sell a steel bolt set but that's just the bolt and nothing else that comes with that... Best bit is though, these aren't rare... You can legit buy them from Asian retailers for cheaper even with shipping!! https://www.milspecsolutions.co.uk/W-S-Airsoft-GHK-AK-Steel-Bolt-Kit-Type-1.html You are indeed correct, I'm wondering when this was originally bought now
  8. Stacycanshoot left Positive feedback for Pedro_Gold
  9. Ronin0033 left Positive feedback for aragoth
  10. Today
  11. LukeTunst

    Time Left: 6 days and 22 hours

    • For sale
    • Used

    4 mags, 4UAD bucking and correct sling Mock ejector and trigger piece removed as they are known to cause issues £315 Posted

    £315

  12. Lozart
    Ding, ding, ding! We have a winner!
  13.    Lozart reacted to a post in a topic: Red Dot help
  14. Lozart
    Thanks, bot.
  15. therobbafett
    Ooh I’ll have a double check of all that cheers
  16.    therobbafett reacted to a post in a topic: Red Dot help
  17. Scorp

    This advert is COMPLETED!

    • For sale
    • Used

    In good used condition

    £20

  18. JimFromHorsham
    Probably just shonky clone tolerances , be it your RDS or the slide itself , check the slide dimensions - DPP Footprint
  19. Scorp

    Time Left: 6 days and 21 hours

    • For sale
    • Used

    In good used condition

    £25

  20. Scorp

    Time Left: 6 days and 21 hours

    • For sale
    • Used

    In good condition, don't look really to have been used in the field, but there are marks on the baseplates, so not perfect.

    £25

  21. aragoth left Positive feedback for Ronin0033
  22. therobbafett
    Cheers for the input so far. Finally got some pictures to show what I mean
  23. Stordy92
    Stordy92 joined the community
  24. smallso

    Time Left: 6 days and 20 hours

    • For sale
    • Used

    Holosun HS403B for sale Clear image - no scratches on lens Has all attachments that came with it Original packagaing

    £100

  25. tobychap
    When deciding between the VFC URGI 10.3 and the VFC AK74M, both are solid choices, but consider that the URGI’s shorter barrel and compact design might put a bit more stress on internal parts like the gearbox bearings due to the more aggressive handling and tighter spaces. The AK74M, with its longer barrel and classic design, tends to have slightly more stable internals, including bearings that may endure less strain under typical use. If you prioritize maneuverability and compactness, the URGI is great but be mindful of regular maintenance on bearings and gearbox parts. For a more traditional feel with potentially longer bearing life, the AK74M could be the safer bet.
  26.    Tackle reacted to a post in a topic: Memes to chill the f#ck out
  27. 1967PF44
    **** Not a question as such, but just to help you a bit, postage with Parcel Force 48, which is the only service you can use to post this in the UK, will only cost you £12ish, can’t remember actually if it’s £11.40, or £12.20, but it’s no more than that. Booked online, using the drop off at the post office option. And don’t take the enhanced comp cover as it does not cover Airsoft RIFS
  28.    rj1986 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  29. BYRNEMORGAN52
    @EvilMonkeeDidn't these come as one piece too? as in the only thing you screwed on was the silver gas plug? This looks like the stock bolt?
  30.    BYRNEMORGAN52 reacted to a post in a topic: Macks airsoft dreamers of the week thread
  31.    Socks reacted to a post in a topic: Macks airsoft dreamers of the week thread
  32. Cannonfodder
  33.    Cannonfodder reacted to a post in a topic: scammer
  34. Yesterday
  35. Kez7
    Kez7 joined the community
  36. Emergencychimps
    You're using the stock, 8.4 nimah batteries? If so, that , slightly discharged batteries and not enough of a trigger pull is the combo you're getting , it's pretty well known for stock tm recoils. I suspect if you switch it to full auto rather than smacking it then it'll start as well. Essentially what you have is exactly what you're describing, not enough juice is getting to the motor to turn the gears enough and it's stopping just before firing (used to be referred to as lock up). Normally, you're absolutely right to run it stock, a TM especially however this is one of those things that are just crap. The stock batteries are crap and there is no recouping your money for them. My advice would be to buy some 7.4 lipos and use those, You'll either need to convert the rif or buy a converter. IF you can solder 2 bits of wire together, convert it yourself, there are videos (probably from eagle6) on how to do this on youtube. It's easy if you can solder. If you can't solder or are too intimidated to, then some retailers (I think fire support do) that sell a converter. There are other methods to solve this. You can try really hard to give the trigger a good pull every time, however the batteries likely aren't up to the job, they were probably sitting in the retailers inventory for years, so while they might be new to you, they could be 5-10 years old. You can fit or have fitted a mosfet, the Gate Titan is the current one, this is somewhere in the region of £100-£170 (depending on model) plus labour (been a while since I looked), but it is pretty awesome. If you're doing this and paying someone to, then I'd consider a spring upgrade too, even if just an m95 or m100 as this is a gearbox open job. Where abouts are you based?
  37. iesty2711

    Time Left: 6 days and 9 hours

    • For sale
    • As new

    This is a brand new rifle in the box , never fired a bullet. There is minor paint damage due to it being on shelf. Other than that it's brand new and RRP 450n plus

    £199

    Mansfield - GB

  38. HTHaz

    BNIB VFC Gen2 MP7

    HTHaz posted an advert in Gas Rifles

    Time Left: 6 days and 9 hours

    • For sale
    • As new

    Brand new VFC Gen2 MP7A1 Bought on impulse and have since started other builds. No issues and functions correct, comes with the installed NPAS and 1x VFC magazine. BNIB condition only test fired a few magazines. Grab it abit cheaper than PB! Collection only or will meet within reason.

    £250

    Weymouth

  39. PowderedAsh

    Time Left: 6 days and 9 hours

    • For sale
    • As new

    I bought this in China for a loadout and never got around to getting the helmet for it, alas. It is therefore new! The helmet cover features a velcro rectangle on one side for a patch, and a velcro-closed flap on the other side, through which is supposed to run the cable for NODS that go to a battery pack carried on a soldier's LBV, part of the PLA standard issue smart-ish soldier system. I believe this helmet cover is designed for the older PLA QGF-03 helmet, rather than the newest QGF-19. As the QGF-03 is based on the PASGT, it should theoretically fit a PASGT-type helmet, though I haven't tried it. Price includes shipping in the UK

    £10

    , Kent - GB

  40. Praxeti left Positive feedback for Ronin0033
  41. PowderedAsh

    Time Left: 6 days and 9 hours

    • For sale
    • As new

    I bought these in China for a loadout and never actually got round to using them. I believe these use the Type 21 pattern camouflage material, rather than the older Type 19 pattern, but its a little hard to tell as the large ABS pads cover most of the pads. Price includes shipping in the UK

    £15

    , Kent

  42. PowderedAsh

    Time Left: 6 days and 9 hours

    • For sale
    • As new

    I bought these in China, never used them, just tried on once for size. The pattern is the PLA's current issue Forest Pattern Type 21 Camouflage. If you are looking for some hen's teeth in your loadout, here it is... This sale includes the 'fighting shirt' and trousers. In Chinese parlance, this style of fighting shirt uniform translates to 'frogsuit', maybe due to the association with Frogmen. There are velcro patches on both arms, and reinforcements on the knees, elbows and arse, weirdly enough. Chinese sizing can be a bit vague, but 180 corresponds to maximum height in centimetres, and 92/96 corresponds to chest measurement in centimeters. For reference, I am 178cm tall with a 38 inch chest and normal build, and these fit very well. The trousers are a medium-long leg, with the waist being about 30-32 inches, with elastic expansion sections and 2" belt loops. Pairs well with the knee pads, belt, helmet cover that I'm also selling, if you're looking for a modern PLA loadout, haha. Price includes shipping in the UK

    £65

    , Kent

  43. Tommikka
    That’s what makes it even more rare
  44. PowderedAsh

    Time Left: 6 days and 8 hours

    • For sale
    • As new

    Nothing fancy about these, they are just a new pair of black half-finger tactical gloves with that reinforced carbon fibre-looking knuckle part. Bought them for a particular loadout, then realised the loadout was more suited to coyote-coloured ones. Price includes shipping in the UK

    £5

    , Kent - GB

  1. Load more activity
×
×
  • Create New...