All Activity
- Past hour
-
-
Time Left: 6 days and 23 hours
- For sale
- As new
Never fielded any of these, just for looks SOTAC Metal MAWLC1 Laser Aiming Device LED Light IR Light IR laser Green Lasers with Control Pressure Switch - £179.99 on aliexpress, £50. Looks cool but I could never get on with the controls, pasted at the bottom here for reference for the buyer NGAL Metal WADSN Version Red Dot Laser IR Sight Pointer Weapon Light Strobe Airsoft Tactical Fit 20mm £117 on ali express, yours for £35 (I was disappointed with the look of this one, looks nothing like the real thing hence going cheap) - sold Airsoft Tacital PEQ DBAL A2 CNC Green Aim Laser IR, LED White Light with QD Mount Hunting Guns Weapon Laser Sight 3.5MM £125 on ali, yours for £50 Introduction: Name: MAWL-C1+ Laser Flashlight Color:BK Install: 20mm Rail Material:Aluminum Alloy Duration: 40min Battery: 16340/CR123A*1(NO Include) Green Laser + White Light + IR laser + IR Fill Light Features: Laser Contstant-on、White Light Contstant-on\White Light Momentary-on、IR Fill Light Contstant-on、IR Laser Contstant- on+ IR Fill Light Momentary-on I GEAR 50lm II GEAR 110lm III GEAR 220lm Operation: 1. Visible mode: In high or middle mode, double click button A to activate the visible LED, click button A again to tum off the visible LED. Long press button A , activate green visible laser, long press button A again, laser extinguished ; in the moment mode click button A to activate the visible LED momentarily. 2. IR mode : Click button B to activate IR LED momentarily; Double click button B to activate the IR LED, click button again and the IR LED will be closed; Long press button to activate the IR laser, long press button again , the IR laser will be closed. 3. Under any of the working statues , click button A and button B at the same time, the equipment will stop working. Click button A or button B again, the equipment will go into standby mode.£50
-
Lozart reacted to a post in a topic: Returning After Long Break - Essential Maintenance?
-
Anything rubber will probably have dried out so yes, as you suspect it's going to be new hop rubber, gas seals etc at a minimum. Depending on what sort of lube and level of maintenance you were at when the guns went into storage then I'd certainly consider a good overall service. Batteries - absolutely. Get some new ones. If you have Nimh type ones then they've been roundly replaced by LiPo (go for 7.4v ones though). If you already had LiPo be grateful they haven't already burnt your house down and get rid! New seals are cheap, just change them over and then you can sell as "refurbished" rather than "serviced but might still leak like a sieve".
-
Thanks for the feedback! That thought of buying new had crossed my mind, but part of the reason I was wanting to get everything in working order was so that I could sell at least a couple of the guns off. I'll need to dig everything out and do a full inventory but I had definitely gone a bit overboard with purchases before I stopped playing. I'll plan for new hop rubbers and a barrel clean for each as a minimum and take it from there. Regarding GBB mags, do you reckon soaking the seals in silicone oil or similar would be enough to revive them, or will they likely need replaced entirely? I'd like to think I had everything filled with maintenance gas, but I'm not sure I did.
- Today
-
Returning After Long Break - Essential Maintenance?
Emergencychimps replied to Kha0s's topic in General Help
Honestly?! Id just buy a basic specna arms type aeg. There has been a massive improvement in the quality of kit available in 10 years. Now, you could regrease everything, swap hop rubbers over and buy new batteries, and it'd cost less but the aim of the game is to have fun. If you dropped out previously it's because you didn't find it fun enough and I'd advise to do the thing that's most fun. Ruining a couple of games days as you do some maintenance and realize it needs more of this or that isn't worth the savings you'll make or the feeling you're being out performed. This route might cost you the love of the hobby. Personally if I was determined to fix up what I had, new hop rubbers, new 7.4 lipo batteries and a barrel clean. If opening the gearbox and greasing is needed.....well then id just buy a new one. -
johnnyj reacted to a post in a topic: Gun picture thread
-
-
MistakenMexican reacted to a post in a topic: New TM pistols - prepare your wallet
-
GSXR reacted to a question on an advert: Aap carbine
-
Hi - I'm looking to get back into airsoft after a ~10 year hiatus and have a few AEGs, some gas pistols and a spring bolt action that have sat in storage this entire time. Is it safe to assume all of my RIFs will require a bit of work before they are ready to field? I'm thinking at a minimum the seals on all of the GBB mags will have perished and there's a good chance most of the batteries are dead? Are hop rubbers also likely to be bust?Will all of the gearboxes need re-greased too? Anything else I should be considering? Cheers!
-
GSXR joined the community
-
-
ak2m4 reacted to a post in a topic: Hard decision
-
That is exactly what it is.
-
BYRNEMORGAN52 reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
I'm more intrigued to find out why they're selling them on Depop of all places!
-
At least it isn't JBBG... The site appears to be an old farm with outbuildings that have been converted into commercial sublets. The house is likely nothing to do with any of the businesses on site!
-
Lozart reacted to a post in a topic: Gun picture thread
-
-
ak2m4 reacted to a post in a topic: Double Eagle M906C - Internal upgrades / tinkering
-
Sounds like you are suffering from the same issue that the SA80 (A1) was plagued with (amongst many, many, many others of course). A simple metal fence welded on solved that. Possibly a 3d printed plastic equivalent superglued/epoxied on would assist your situation? Looks like a chap has knocked out a file for the SA80 version that might be able to be modded/sanded/cut to fit? https://www.thingiverse.com/thing:4321243
-
-
Cocha reacted to a post in a topic: Load-Out / Loadout Picture topic
-
...includes an underground shooting range.... And a load of old ammo crates stacked next to the Rolls in the massive garage - looks more than a coincidence. Maybe there is a healthy profit margin in plastic gearbox two tones!
-
ruskitseller reacted to a post in a topic: Hard decision
-
Cerberus joined the community
-
-
The twat didn't even turn it off between shots.
-
brandonblair321 joined the community
- Yesterday
-
-
Rather predictably, this morning saw me at Airsoft Plantation, where I met up with around 180 other players for a day of slinging plastic at each other. After setting up and chronoing my recently overhauled and upgraded QBZ 97, which was shooting slightly hot, comparing guns, discussing the pros and cons of gas and gearboxes, and listening to the safety brief and the first game brief, our team set off for the mortar pits, while the red team went to the village. We had two lives, while the attackers had 10 medics, upon whom they had infinite regens. Their objective was to get three smoke grenades, which were carried in an ammo box, to their respective targets in the mortar pits. They could not open the box to find out where the objectives were until they were in the mortar pits and, if the player carrying the box was hit, they had to hand it to the medic who saved their life, who would give it to the next player who regened on them. I initially took up a position behind a berm towards the left side of the mortar pits. The enemy took a while to appear but, when they did, the recently upgraded SR47 showed that the work that I had done on it had been worthwhile; it was popping BBs out to a great distance and had a much improved trigger response. I got lots of good hits before being hit, whereupon I fell back to the bunker, from where the SR47 carried on as it had started until I was hit again, this time by an enemy player who had sneaked around the boundary berm on the left. I joined my other deceased team mates along the back of the site to watch the fun, which included a brilliant piece of work from a rental, who took out several of the enemy before being hit. Eventually, of course, the attackers achieved their objectives and, after a short visit to the safe zone to reload, the game was reversed. In this iteration, I was one of the medics; our attack was pretty direct and we pushed into the mortar pits, taking a lot of hits along the way, which kept us medics busy when we were not shooting the enemy. Our smoke grenades were set off at their targets in a time that was four minutes faster than that of our enemies. Hip hooray and tally ho, as Blackadder's Lt George would probably have said. The next game was a fallback using most of the site. The red team had to transport a casualty on a stretcher, which was a four person lift, from the far end of the woods to the border bridge, then to the town hall and finally to the plane in the DEA base; at each location, they had to set off a smoke bomb that was located there. They had infinite regens on a marshal who was 30m behind their rearmost player, while we had one life in the woods, another in the border/village, and a final one on the far side of the firebreak. We set up a two layer defence in the woods and I found myself being part of the second layer. The enemy's attack was quite slow, taking a long time to break down our front line, who were well supported by those of us in the second line. Eventually they did so and, after a bitter fight, we were overwhelmed and I made my way back across the border bridge. I decided to make use of the boundary ditch, which is largely sheltered by bushes and small trees, as a good location from where I could easily move back and forth and pot enemy players as they advanced past me. As some of you may remember, I have previously written about the different types of mud at AP and this location offered me a completely new variety to admire; it was reddish brown, clearly indicating that a different soil stratum exists along the far boundary, very smelly and extremely glutinous; I was as happy as the hippopotamus in the song by Flanders and Swann. This plan worked rather well as I was able to shoot passing players from the ditch and then scuttle along it to another position without being seen. Eventually, I heard a shout of "Game Over"; the enemy had timed out without reaching the town hall. Lunch followed and the somewhat filthy appearance of my boots and trousers was in contrast to everyone else in the safe zone. After lunch, the game was reversed, with our objectives now being limited to getting the stretcher and its casualty to the border bridge and the town hall, setting off their smoke bombs. The group that I was with formed the right flank of our attack in the woods, moving along the boundary and getting into lots of engagements with the defenders; although we took casualties, we worked well as a team and overran them reasonably handily. We then got somewhat bogged down at the border ditch and bridge due to a stalwart defence by the red team, which we we eventually overcame, but not before I twice had to go in search of the regen marshal. As the enemy had taken heavy casualties fighting at the border, we were able to push into the village reasonably rapidly, getting the casualty to the town hall and setting off the smoke bomb there. At this point, I had to leave as I needed to get home, sort out my kit, have a shower, and then get to Desertfest in Camden in time for Slift and the truly awesome, overwhelming and weirdly uplifting Earth. It was a typical AP day of airsoft, with well designed games, great play and lots of fun; it was played in a good spirit. I am not sure if I will be playing next Sunday; I am going to see Soft White Underbelly (aka Blue Oyster Cult) at the Islington Assembly Hall on Saturday evening and the thought of getting up early the next morning is not particularly attractive. Weapons used: Hurricane Kit SR47 MP5A2 (most of the externals are SRC, except for a CA SEF trigger group, and it has a mix of internal parts) ASG XP18 Commander (CO2) Drinks consumed: Water Tea
-
SniperSpicer joined the community
-
picolopcl joined the community
-
Curran.o joined the community
-
Valkyrie16 joined the community
-
Easy decision for me. I'm equal opportunities. I shoot anyone on the opposing side. If you're well enough to play and shoot, you're well enough to be shot.
-
-
Time Left: 6 days and 10 hours
- For sale
- Used
Unknown make side folding stamped body AK74/M Midwest industries gas tube RIS RIS folding upper cover VS-25 keymod handguard Zenitco RIS handguard also included Zenitco style extended fire selector Zenitco style extended mag release Zenitco style charging handle extension (not fitted in pics) Stock front sight block (not fitted in pics) Brand new AK-12 midcap (Leupold not included) Gate titan - expert 13:1 SHS gears - freshly reshimmed SHS cylinder + cylinder head SHS piston + piston head Uprated tappet plate Delay chip High torque motor LCT gearbox casing Maple leaf hop rubber 6.03 stainless tightbore Deans to top cover 330FPS Awesome trigger response, consistent FPS and good range. Body was camouflaged, now painted black, not phenomenal but was going to run it for a bit then get it stripped and cerakoted. £320 inc P&P. Swaps need to be localish to Salisbury SP1 as cba doing swaps by post. Whatsapp 07869406455 w/ screenshot of advert (weeds out messers, thanks)£300
, Salisbury
-
Time Left: 6 days and 10 hours
- For sale
- Used
Inferno gen 2 - spartan FCU Flat trigger G&P M4A1 engraved receiver set Daniel defense mk18 front end Madbull ally 6.03 (iirc) barrel Prometheus purple hop rubber Arp9 grip Suppressor (No sights inc) Guns great just doesn't suit my play style so would like to sell to get a levar. Would make a great DMR but I ran it at 340fps and had a good days game. Bad points No mechanical safety (will shoot semi in safe position) Won't feed at flat out fire rate but that might of been my midcaps Body/stock tube etc had been sprayed camo, sprayed it with krylon to make it look more sensible. Regular G&P reciever wobble, a magic pin would fix it, doesn't bother me much. £420 inc P&P Swaps need to be localish to Salisbury SP1 as cba doing swaps by post. Whatsapp 07869406455 w/ screenshot of advert (weeds out messers, thanks)£400
, Salisbury - GB
-
Time Left: 6 days and 10 hours
- For sale
- Used
SCW9 Pro GBB Bought from new recently, before improving: - Has had receiver professionally refinished with Cerakote to fix the dodgy Maruyama powder coat - Fake bullets no longer in magazines - Extra rare '25 rnd' magazine - 1913 Rail end - Not pictured, but also comes with spare trunnion - Has had restrictor removed Dismantled / reassembled to achieve the above mods, therefore listing as 'used', but is in excellent condition and with the new finish I'd take this over a 'new' one any day. Has some very minor handling marks. Will need someone to purchase who has a little expertise as when fired in semi auto it sometimes 'double fires'. I am unable to rectify as no time now, but suspect it is because the nozzle retainer screw needs a little loctite on it. Postage only, included in price£220
- GB