All Activity

Generally speaking, filmsin tends to just mean restricted ammo counts and semi-auto only (except support weapons) to stop complete drum mag on an M4 hosefests. This is about as 'hardcore' as a regular airsoft site will run, as in the grand scheme of things milsim isn't that popular. If you want sleeping in the cold, firing two rounds all day after lying in a trench - then yeah, go to a Sterling game or one of the more hardcore Defiant ops. Going to any walk-on game and hoping for this will always leave you disappointed.

Hawkwind.

Come on don't leave us hanging, what was the band called? Would we know them? Was it Steps ? 😄

@Rogerborg Found it However, I could be a little bit pedantic as it looks like it hadn’t gone to court at the time, so an airgun might be a RIF as that was the arrest and he had apparantly both pleaded guilty and then denied He did end up with a conviction, but I have not fully searched back to see what the actual charges were in court So an F could be a RIF, and there has been a case about it, so I must still concede your point of view - unless we get up the court results to find it rejecting the view (If the actual charges & case in court did not test F can be RIF then I still concede the line has moved a little due to the original arrest) On the Home Office view as paintball and frangible, the old version is referenced in the UKPSF post below (But in recent years it has wobbled due to grey import ‘home defence’ paintball pistols, with the updates on status in each of the AGMs for the past few years) https://m.facebook.com/story.php?story_fbid=532643633518379&id=100039104568012

Lydon is/was a fan of a band that I used to manage about 25 years ago. They wanted to get him to do vocals on a new version of their only hit single, so I had to try to negotiate this with him. The man is a complete arse.

It was an ASG, it was what the site had in stock

Thanks for taking the time to give me this information. I will try to get to one of their events, not sure I can make this one sadly. I tried FilmSim event and it was not really a MILSIM and really just a Skirmish which frankly I could have gone to anywhere, so was a bit disappointed. Just from reading the Defiant game rules it seems a bit more up my street as long as it is run as stated, because I have been mislead this way before.

Hello again, It's been a slow few months. The moths inhabit the empty wallet, and the paint is slow to dry in the cold of late winter / early spring. I have since acquired the HPA engine (Scalar Seraph, though I've yet to acquire the tank and regulator. I've started working on the HPA adaptation of the M7 SMG, and will be looking to do do some preliminary thinking and design work for the MA5B (Assault Rifle). Cute lil thing. I reprinted the entire helmet as the prior one was too small for me. I also printed it as one piece instead of 2, out of PLA-ST instead of ABS. I got a significantly cleaner and stronger print. While experimenting with the electronics, it turned out that DC fans usually don't like PWM unless they're designed for it. This means that unfortunately I had to ditch the controllable fan speed for a simple on / off switch. Preliminary sanding done using orbital sander, proxxon pen sander for details, and hand sanding. My fingers and tendons thanked me for buying the pen sander. Layer of Motip spray putty that needs to be sanded right back to the base material. Leaving too much on makes the paint easy to chip / flake off. Unfortunately I spent a lot of time sanding the helmet smooth, painting it with a rather heavy top coat of Maston olive green, before figuring out an alternative finish that I'd rather use. It sealed the deal when I foolishly thought the paint was fully set and I turned it over to paint the bottom. Somehow I hadn't thought of making a helmet stand, and the paint on the top marked from the bubble wrap I'd set it on. I sanded it back a bit before applying the textured finish. The technique I discovered was simply painting over a textured spray paint, which provides a nice textured finish that's extra matt and scratch resistant. Unfortunately this meant I wasted rather a lot of somewhat expensive paint. Comparison between the same paint, both smooth and textured. Rustoleum textured paint. Created a helmet stand for painting without the paint ever touching anything. Overcoated with Maston olive green. Unfortunately the black also didn't fully set, and the masking tape marked it lightly. The lacquer evened it out well enough thankfully. I've never had this many issues with paints not setting even after days, even in the cold months. I had the same paint mark from sitting on fabric weeks after painting. I ended up using a food dehydrator inside a large cardboard box, set to 50'C for 12 hours to "bake" the paint. It seems to work well. Voila. I think it came out rather well. The chin strap was a bit of an experiment, to see whether a fully elastic strap would work. It didn't, it's *too* elastic. You want a little bit of flex to allow your jaw to wag, but too much and it allows the helmet to shift and pull right off your head if you fall. So as you can see there are multiple layers of elastic with some inelastic strap to remove the elasticity rather than ripping all the stitches. I'll certainly change it at some point. I've used a magnetic buckle as I did with my previous helmet that makes it easy to secure with gloves on. Due to the buckle, you can't get a cheek weld on the side it's on. It can be reversed easily, but not something you'll be doing mid game. Getting a cheek weld in general is awkward, but it's the price you pay to use a "sci fi" helmet. It is possible, and better than my prior helmet in most ways. I've also added TPU (rubber) pads to the inside and bottom of the mandibles to stop any scraping against guns to protect the finish of both and reduce noise. The padding is a rather crucial part of this helmet. Not only is it about comfort, but it's about safety too. I see a lot of dodgy custom helmets, and I wanted this one to not be a death trap while running around playing in the woods. I've bought a set of quality D30 pads from a body armour shop, which are amazing at absorbing impacts. Some may know D30 from motorbike armour / padding. These form the primary padding around the skull, while my own DIY padding protects the neck from rotation of the helmet. It consists of 20-30mm of hard / dense EVA foam, with a soft open cell fronting and sewn mesh covering. The fan and battery is integrated in such a way that it doesn't protrude or create any pressure points. The fan is a little louder than desired, but it does actually work to clear / prevent fog if you tilt your glasses slightly so there's a gap at the top for the air to pass into. I imagine it works well for goggles as the top vents would be closer to the duct outlet. The side panels can also be replaced with low profile ones that should allow wide goggles to fit. Key thing for me is it's low fuss, no tubes to mess with, and it's there when I need it. It's a little noisy for running all day, but there's enough capacity in the 18650 battery to do so. Something I may look into eventually is fitting a full face shield, a little like the NMPD police helmets in ODST. The Bolle sphere would be the main candidate as it has a 16J impact rating. One more project I'll be working on is a backpack for my kit and the HPA rig. I wanted to do the hardcase trooper backpack from Halo Reach. This'll be a tall print, using up 359mm of the XL's 360mm build height. I want to add some MOLLE modularity to it. I'll be sewing the straps and padding system, and likely padding out the inside so it's not a rattle can. On another post I'll detail the DIY chestrig I made once I have the chestplate and pouldrons finished up. Thank you for reading, more updates to follow

*Insert popcorn gif here* Especially if you look at how the band broke up and the butter salesman's dumb fuck antics over the past few years

SCAR-L. 👌🏻

That’s a really good question - it’s somewhere amongst the various “is it a RIF” threads in here I had a thread on a paintball forum which had the majority of the complex assortment of relevant legislation & case law points, and had tagged it there - but that has since died and taken my ‘convenient & tidy-ish” reference list away before I managed to rescue the content I shall endeavour to relocate it

That's a big if though. It's far more likely that if it does sell it'll be to someone in GB

I did not mention anything about how RM view anything; neither did I claim that NI is part of the mainland. I stated that NI is part of the UK, which it is. Perhaps you would like to argue with something I have actually written.

Oooh! Are we planting potatoes?

Ah, that makes more sense. I was indeed being uncharitable, and got it bass ackwards. Mea culpa. Well, good luck to them. Better to own the brand than be the whipping boys for someone else.