Jump to content
Registrations are working again

All Activity

This stream auto-updates

  1. Today
  2. KirbyHCI
    I'm not sure the name Bristol Airsoft exactly fits anymore, and it's a bit far for me, but this was recently announced and I thought it worth posting about here just for folks to be aware!
  3. SixOfDiamonds
    Think I might have found one, price isn't so good over here though. https://evike-europe.com/98228.html Appears Evike have a european store, would be cautious of the shipping/import costs
  4. Galvatron
    Ignoring Ares' less than desirable repuation, it's cheap because the HPA engine & gearbox assembly were manufactured to keep costs down so you lose a few features compared what you'd usually see from Wolverine or PolarStar. It uses a low-cost solenoid and its delay can't be adjusted so your firing rate is capped (no wanker guns on a budget). You can't fine tune the volume of air inside your inner barrel to suit its length either (fixed dwell) so you have to rely solely on the pressure from the regulator to control the muzzle energy while being conscious of joule creep. A really good write up was done before so it may be worth a read.
  5. Yesterday
  6. Cannonfodder
    As above. I don't think there are any sites in greater London since Bunker 51 closed last year so you'll need to look further out. Where abouts are you from?
  7. Galvatron
    Are you talking about just the switch pad and not the cover? Ali Express might have something similar as it sells switch pads individually, both for 2.5mm and 3.5mm.
  8.    Cannonfodder reacted to a post in a topic: Airsoft site in London which is approved under UKARA
  9. Hallopp
    Im looking at buying an ARES HPA PRE BUILT GUN Ares Amoeba M4 Tactical (ARES-AM-008-DE - Tan) - HPA Engine Pre-Installed https://www.bespokeairsoft.co.uk/ares-amoeba-m4-tactical-ares-am-008-de-tan-hpa-engine-pre-installed What are people thoughts ??? seems odd its that cheap
  10.    Cocha reacted to a post in a topic: HK11/HK21: A question for the hivemind
  11.    pyromancer6 reacted to a post in a topic: Gun picture thread
  12.    Tackle reacted to a post in a topic: What grinds your gears on forums
  13.    Colin Allen reacted to a post in a topic: What grinds your gears on forums
  14.    Tackle reacted to a post in a topic: Airsoft site in London which is approved under UKARA
  15. Realist4030

    Time Left: 6 days and 16 hours

    • WANTED
    • USED

    Will pay postage if needed

    8.00 GBP

    London

  16. MistakenMexican
    Are you sure those are AEGIS kits? the two I owned came in a grey padded box with AEGIS written on the front…
  17. MistakenMexican
    Toxicant nineX19 kit
  18. Csummers
    Csummers joined the community
  19. Galvatron
    In all likelihood you'll have to search further afield of Greater London. With a premium for leasing/buying property or suitable woodland, running an airsoft site in London isn't sustainable. Bunker 51 closed down a few months ago. It's worth checking this site out: https://playairsoft.uk/map It's not an exhaustive list but there are options just outside Greater London accessible by public transport and a shortish taxi journey away (I assume you don't drive).
  20.    Galvatron reacted to a post in a topic: What grinds your gears on forums
  21.    Socks reacted to an advert: VFC FAL OSW
  22.    Socks reacted to a question on an advert: VFC FAL OSW
  23.    Enid_Puceflange reacted to an advert: VFC FAL OSW
  24. carpio
    Hi all, I am looking to get the UKARA player registration. Hence, I need to take part 3 games in an UKARA registered site. However, I failed to find any list. Is any one able to tell me which site is approved by UKARA in London city? Thanks
  25. carpio
    carpio joined the community
  26. BigAl
    HI mate, would it be possible to fit a limo inside this?
  27. Hallopp
    Hallopp joined the community
  28. Wbuli
    Wbuli joined the community
  29. Austeyr
  30. Enid_Puceflange
    Argh fuckitty fcuk! 😩🤣 Great Price 👍
  31. danp96

    Time Left: 6 days and 14 hours

    • FOR SALE
    • USED

    Non firing but largely in good condition externally. £50 posted with fees

    50.00 GBP

    - GB

  32. Ronin0033

    Time Left: 6 days and 13 hours

    • WANTED
    • USED

    WANTED - Triangle Handguard Collar for M16. Doesn’t matter if it has the smaller holes in the picture, just the big middle one! Anyone got a spare kicking around before I buy a new one?

    12,345.00 GBP

  33. ArranLH

    Time Left: 6 days and 13 hours

    • FOR SALE
    • USED

    Deadly customs hicapa holster originally tan but was painted. paint can easily be removed if you want it back to tan or just give it a re-spray comes with mid ride mount and leg strap price includes postage

    45.00 GBP

    - GB

  34. ArranLH

    3 x PTS EPM Magazine

    ArranLH posted an advert in Parts

    Time Left: 6 days and 13 hours

    • FOR SALE
    • USED

    3 x PTS EPM 150 round magazines Price includes postage

    50.00 GBP

    - GB

  35. ArranLH

    Time Left: 6 days and 13 hours

    • FOR SALE
    • USED

    3 x PTS EPM - MTW 120 round magazines Works with MTW Empty mag detection Price includes postage

    50.00 GBP

    - GB

  36. sedur69
    Love waking the dead 🧟‍♂️ I know you should know what you are in for when ordering from Ali-X, but this one took me slightly by surprise. I ordered some M32 Mod 4 / SE32 (lol, you can see where this is going) with rail arms from Ali express for similar money to the post above. What arrived this afternoon was interesting. I received, in pretty poor/trashed packaging, some (presumably knockoff M32) SE32s with rail arms and a PTT. Unlike the official units, the packaging was insufficient, hence it got trashed by the farse that is Evri. No nice case/bag that comes with the legit models. The unit itself appears possibly unused, though the PTT was in the box for the rail arms, and the rail arms were in the box with the headset, so I suspect this was returned by someone and sent strait out to me. The whole thing looks like its been to Ukraine and back, which is fun, because its came in a Russian box with Russian instructions! I've not been to get some batteries to see if they work yet, also not sure I've got the nerve in-case they have been tampered with 😉. Has anyone else received something similar?
  37. jzmalexander
    Good point as I'm not sure how well the magazine would keep up with that, though I still want to be able to use 11.1v batteries in this with a stronger spring, as currently the low power is just not what I want. Right now on 0.2g it would be 272 FPS, I'd want it closer to 300 at the minimum. Considering that, what mosfet should I look for and what power of spring? Also with the higher power of an 11.1v, would I need to change out the piston or motor to not destroy the internals?
  38. Tommikka
    …. Annoyingly I don’t seem to have particular props in my photo galleries @Cooperman26 I would recommend that you take your dynamite to your local, they may be willing to blow them up with some checks, but I’m more inclined that they would be willing to use them as dummies … or you could end up running your own themed game
  39. Fergus66
    Hi, I recently purchased a Manta switch cover in Black to match my current set up.Currently I have a Tan one which came with the PEQ 15. Unfortunately when attempting to change the pad/switch the wires snapped! It was a much more challenging than I had first anticipated.I am hoping to replace the 3.5 pad switch as I do like the Manta.However it is proving quite difficult to buy one on its own I can only assume it is because it old school. Any suggestions,advice or guidance would be greatly appreciated on my part ? Many thanks
  40. Tackle
    What's that fps equate to on a .20 ? I'm a big believer in only "fixing" something when its broken, unless its performance is crap, boneyard level crap. Also, in the case of lmg's, sustainable support fire will be sacrificed if you try to get this up to aeg sewing machine speeds, something its irl equivalent was never meant to do, & you may well shorten its lifespan if you try to achieve that. Worth thinking about ?
  41. Mini airsoft

    VFC FAL OSW

    Mini airsoft posted an advert in Gas Rifles

    Time Left: 6 days and 12 hours

    • FOR SALE
    • NEW

    VFC FAL OSW GBBR comes with osw stock adapter, ACR stock repro and 3d print adapter, Handgrad grip and cover, SRO red dot repro, DD suppressor. And its original muzzle and stock. Asking for 620£ If you NOT wanting original osw I can do 560£

    560.00 GBP

  1. Load more activity
×
×
  • Create New...