All Activity
- Past hour
-
Thanks for the reply. I’m going to be wanting it as a dmr set up, would you still recommend the M and then buying the semi lower? Thanks, do you know if the barrel issue is the same across all the models? I’m wanting it set up as a dmr so I’ll definitely need a long barrel
- Today
-
Tackle reacted to a post in a topic:
Old, fat and broken - loadout advice
-
Time Left: 6 days and 22 hours
- WANTED
- USED
Star/Ares L85 UGL wanted! Shoot us a message.1,234.00 GBP
-
Thanks all for the suggestions. I am anti-HPA so that option is out for me, I'm afraid. (In engineering terms, it is a fantastic method to sling plastic balls down a brass tube, i just don't like additional stuff and the evolutionary step backwards) I've had the DMR powered AEGs out this evening, testing various set ups for noise. Also found my old MK1 Ruger Carbine. Made a custom suppressor for it with 3d printed baffles and foam. The trigger click is louder than the muzzle noise. With 5x 17rnd mags, I'm gonna give that a go (because I already own it) Tried my son's Ares boltie. I could get used to that i suppose. I note the weight issue with the mags for the Novvi. I'll put that on hold for now. I used to have a Cyma M14 SOCOM, all tricked out by the previous owner. I loved it. Range, accuracy, quietness (still at 340fps) but to use an optic on it i needed a neck like a giraffe! Just took a look at the Tac41... I'll do some more research into that as it could be a winner. Thanks again.
-
Anonymoose reacted to a post in a topic:
The 'What have you just bought' Thread
-
Gunner91 reacted to a question on an advert:
VFC AK74M *Never Skirmished*
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Galvatron reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
In the first post, you said it was cycling on an 11.1v; have you tried a different 11.1v battery? If you want to make it a bit snappier without too much outlay, an SHS high torque motor would be an improvement over the stock one. However, check what motor you have in there first! If you can run to it, something like this would be even better: https://www.ak2m4.co.uk/internal-parts/motors-parts/solink-lite-brushless-motor-31k-short
-
Austeyr reacted to a post in a topic:
The 'What have you just bought' Thread
-
Jaylordofwaargh reacted to a post in a topic:
Load-Out / Loadout Picture topic
-
The 'What have you just bought' Thread
Colin Allen replied to Cameron364's topic in Guns, Gear & Loadouts
Not directly bought, but £10 worth of raffle tickets secured this. The plan is to throw them all at the Lad next time we play together.
-
midget10256 reacted to an advert:
VFC L403A1 GBBR with extra mag
-
Austeyr reacted to an advert:
VFC L403A1 GBBR with extra mag
-
You certainly ain’t gonna make many friends in here if you carry this malarkey on 😂👍 -
Hey Loki, I think there's a few of us on here experiencing similar issues, well done for not letting it get the better of you. I get your reasons for mag compatability etc, between rifle & pistol, but cant help but think that the benefits of the lighter carbine will be offset by the weight of the numerous gas mags you'll need to carry, especially if you want any kind of reasonable ammo capacity ?. Obviously a dmr role puts you midway between assaulter & sniper, bit more limited on fps, & probable range, than a fully set up sniper. Why not consider something like an m14 socom, light & not the full length rifle, but excellent range, especially if you can get it to the dmr limits (& ive heard good things about players insulating inside the body for further sound reduction), aeg so good all year round, & technically you'd probably get away with just one mag if you run a hi-cap, meaning you can slim down your load carrying kit to the bare essentials, & a well set up nbb mk23 or Nov equivalent & 2 or 3 mags should cover your sneaky sidearm needs. Obviously im not trying to teach you to suck eggs lol, you've been at it at least 5-6 years longer than me, but being equally broken means ive had to drastically rethink what i use. Worth considering ?
-
Time Left: 6 days and 21 hours
- FOR SALE
- NEW
Selling my like new L403A1 gbbr, only the testing fire, never through a bbs.570.00 GBP
-
I've bought from him too. Guns were brand new, as described, arrived quickly and cheaper than anywhere else. No complaints about him personally.
-
TheAirsoftScot joined the community -
Time Left: 6 days and 20 hours
- FOR SALE
- NEW
- CYMA VSS Vintorez AEG with High cap magazine and angled metal fore grip (used twice and in great good condition) and NimH battery -Three CYMA VSS mid- cap magazines (great condition) - CYMA 20 mm scope mount rail for AK style side mounts (good condition) - Nuprol 7.4 V 1200 mAh LiPo stick battery (excellent condition and used twice). - Nuprol safe battery charging bag (great condition)265.00 GBP
Launceston, Cornwall - GB
-
Tackle reacted to a post in a topic:
Old, fat and broken - loadout advice
-
stimpy545 joined the community -
I’ve got said item …. -
This advert is COMPLETED!
- FOR SALE
- USED
Comes with x3 gas tight mags airtac mp5 adapter x4 mp5 mags Hard key used as only selling as wife is pregnant and won’t get time to play175.00 GBP
- GB
-
A guy at my local site has the exact same issues as you (older, wider, and broken) and he uses an SSX303 as a DMR and loves it. His has the shot shell HPA adapter as @The_Lord_Poncho stated above as that makes carrying ammo a lot easier and a lot lighter. I personally don't like it because the trigger pull is horrible due to the double action trigger, and it's harder to cock the hammer (teehee) manually, but if you get the right parts they shoot well and with the HPA adapter they can be tuned very easily. Another popular option that goes more towards sniping (as it's a bolt action) would be a Tac41 lite. They're very light and very easy to carry, with a single extended mag holding 110rds you may even get away with not carrying any spare mags for it and just reload the mag between games.
-
The 'What have you just bought' Thread
Cooperman26 replied to Cameron364's topic in Guns, Gear & Loadouts
Went on a pyro spree… X10 EG67 pea grenade wire pull X10 FBS MK5 pea grenades wire pull X20 MK5 FBS ThunderFlash X10 FBS Thermobaric multi bangs 🫢 -
I've fortunately only seen it... twice over the almost 20 years I've been playing. Both times it's been over something incredibly stupid and trivial, and fortunately I've never actually had anyone throw a punch at me; being 6'5" definitely helps there, as the guy who squared up to me in that Vietnam game a few years ago did think better of it and walked away eventually. And you're totally right. Fisticuffs over BB wars is turbo-cringe.
-
Tbf, I don’t think this gentleman’s advert deserves to be in this thread. I’ve bought from him before and at a very fair price. Great gentleman to deal with.
-
This advert is COMPLETED!
- FOR SALE
- USED
Selling my old KWA MP9 that I got before I had my Ukara in two tone blue. Luckily the two toned parts can be easily replaced with aftermarket ones or OEM ones. The gun has been well maintained and its only had one game and still functions like the day I got it out of the box and its a joy to shoot with its high fire rate & how loud it is!. Mag is gas tight. The entire package comes with: -KWA MP9 -1x 48rd Mag -Original box Looking for £80 for this. Will be delivered via Parcelforce 48. If you have any questions please dm me!80.00 GBP
-
Time Left: 6 days and 19 hours
- FOR SALE
- USED
For sale is my ODIN thermal monocular. Great compact little unit. Fits in the palm of your hand. Perfect to have in your pack until you need it. 3x base mag, or 6 x zoom. Uses a single CR123A battery. Does black hot or white hot, I prefer black hot. The rainbow colours in the picture through the scope cannot be seen with the naked eye and must be my phone when I took the picture. Picture is of a pair of emu at about 10 metres. Comes with original box and original supplied pouch. Can be helmet mounted with a standard dovetail mount. £600 posted or collection from Chichester in West Sussex600.00 GBP
Chichester - GB
-
I have the 2M, if you want me 2p on it... Budget for an upgraded barrel at time of purchase as the stock is a strange 2 piece affair that's horribly inaccurate Because there isn't a sensibly priced aftermarket barrel the correct length, the most cost effective way is to get a more common "long pistol" barrel, which is about 145mm long As this is shorter than the stock barrel the power will drop, so you need to buy the excellent Sabre airsoft npas kit or to widen the brass part of the stock nozzle to bring the power back up Stock hop bucking isn't great, best to swap it while doing the barrel. Also while ordering the NPAS from Sabre order their flat hop adaptor thing The hop unit & barrel aren't necessarily aligned too the nozzle from the factory, and the inner barrel may be a little loose in the outer barrel, so some electrical tape shimming & some time tuning may be needed Mags (I have five) have all been great thus far As a £250 gun - with £50 of upgrades - and some time tuning in the garage it's a cracking bit of kit!
-
austriangeeza joined the community -
Your boxes seem to be selling well.
-
Time Left: 6 days and 18 hours
- FOR SALE
- USED
About 5 Kilograms of used MP5 parts. There is a mostly complete, repainted, ex two tone blue MP5 empty shell in the box, along with most of a MP5 gearbox, selectors and cams, pistol grip sections and forends along with a smattering of other bits and pieces . All of the parts are used, so all will show wear and tear, some will be damaged or faulty or incomplete and only useful as donor bits for other projects. £25.00 the lot. UK only and Paypal only.25.00 GBP
-
I have committed a sin...
-
Own the D as well as M externals. The stock on the D is non-adjustable and may be too short; while the MD is just an enlarged version of the M with a different nozzle/stock. Choose the D if you plan to mount a full size marksman scope - the MD for a magnifier or LPVO. Of course, you may choose to replace the plastic externals anyway. Just be aware both are heavier than they appear. My advice would be to buy the M variant and use the money saved to purchase the Semi lower, that way it can switch between normal and DMR usage with a nozzle switch or Sabre NPAS. You can always install an extended inner barrel under a mock suppressor. Good luck.
