All Activity

Unused Airtac M249 HPA adapter kit. Why you see is what you get👍 Unused as I went rogue and built my own design so no longer required! 😀 Price includes P & P.

Sold this a while ago and the slide catch button got broken, since replaced it with a steel one and now I've made sure it's all okay and running fine it's back up for sale Red dot and torch are both replicas Magazine is gas tight, replica fires fine as it should and can be shown working via video Please note: Neither the red dot or torch will be sent with batteries to comply with shipping policies. Has a thread adapter fitted as I measured the inner barrel (6.03mm maple leaf) inner barrel length incorrectly and it sticks out a little (See images), as well as a maple leaf MR 50 degree bucking fitted Priced according to value of pistol (£130), Wadsn x300U torch (£40) and Sotac Trijicon RMR clone (£53) at 60% plus shipping cost Price includes shipping, PayPal G&S only please

Bought for my LCT RPK but wouldn't feed (Yet works fine in my LCT 105 and 74M?) Has some wear and tear on the mag lip, runs off of 3x AA Batteries Price includes postage, PayPal G&S only please

This started out life as a poorly painted Double Bell AKS-74u with a plastic stock, no handguards, no flash hider and a plastic G36 rail bolted to the dust cover. The gearbox in it originally was terrible, the guy I got it from had tried to "upgrade" it and had completely messed it up. I used paint stripper to remove the poor paint job, however it worked really well on some parts (And removed all of the paint and induced rust), I quite liked the look of the "post apocalyptic/found in a hut in Afghan" look so ran with it. I've oiled all of the metal to ensure no rust can spread however may need to be checked over time. I gutted out the gearbox and hop unit and replaced it with a Specna Arms Edge 2.0 AK gearbox and hop unit so there is a basic gate aster inside. The donor gearbox/hop unit was in my Specna 74m which I used bi-weekly for just over a year and it always ran beautifully. Parts fitted externally are: LCT PK-197 LCKS74 Steel Triangle Folding Stock AliExpress Esmarch TQ (Don't actually use it as a TQ please...) LCT ZB-11 Lower Handguard "Classic" LCT ZB-19 Upper Handguard "Classic" Generic wooden AKS-74u upper handguard which had the finish removed and sanded Cyma DTK 1 Steel flash hider Original AK sling (No stamp) Which is over £180 in externals alone The handguards and stock were painted to match the remnants of the tan paint job showing through to "blend it" together. The black band around the handguard is to stop the top handguard popping off when opening the dust cover to insert a battery, the issue is resolved if you fit the ZB-19 upper handguard Please note the magazine in the image isn't included, instead a "bakelite" orange E&L magazine will be included instead as this black mag did not fit the replica It's definitely not the prettiest of AK's, it has some flaws but it works beautifully for what it is. Priced according to the external parts cost as well as the rough price of the Specna gearbox, the "main gun" itself (The Double Bell krink) is barely factored into the pricing due to the condition and appearance. Price includes postage, PayPal G&S only please.

My beloved LCT VSS Vintorez "DMR", replaced with my want for a RS SVD 😂 DMR is used semi loosely... It's semi locked via mosfet: Gate Aster with the selector modified, I've tried my best to show the sticker in one of the images for the optical sensor, so the auto/semi switch no longer does anything however safety still works (It's a physical safety using the side lever) It could be possible to revert back to semi/auto however I never tried to revert it It has a tight bore inner barrel (6.03mm) which is slightly longer than the stock barrel to ensure it would sit better in the end cap of the suppressor, there's also a 3d printed "spacer" which helps to keep the suppressor lined up with the inner barrel on reassembly, it has a Maple Leaf 60 degree (IIRC) bucking, internal parts have been changed out with AK2M4's AK "Compression" kit which at the time was SHS parts. LCT Gearset remains, and LCT motor Note the motor cage has developed the common cracking, it has been fixed with a strong epoxy as the spare LCT sent me wouldn't fit (???) - It has been used for three games after this fix and there is 0 issues at all. The brown/red mag is a high cap, the rest are mid caps. They (Mid caps) have all had their springs changed from the LCT ones (Except the small mag) as they was pretty old and not feeding great when I bought it. The suppressor screw cap (Where the wiring goes through) used to have grub screw channels to keep the wires from getting damaged - These have been removed to allow the thicker Gate wiring through but they're just standard grub screws if (for some reason) you want to reattach them The rifle doesn't shoot at DMR power, it has a quick spring change system however I found using it sub 350 FPS was beneficial for my play style whilst still having good enough accuracy and distance. There's wear and tear around the rifle, which I've tried to show as best as I can in the images Price includes postage, paypal G&S only please.

4x gas tight TM AKM magazines

had a bunch of messages asking for the pistol stock. so I’ve closed the old advert and returned this to largely stock. G17 gen5 mos 3 stock V2 mags Original box Rmr plate Upgraded CCT spring and piston lid set High sights (they’re supposed to be tritium sights but don’t work) Guarder 6.02 TBB Maple leaf hop H fang pressure plate Full working order. Happy to throw in a few freebies for a quick sale. £315 all in Inc next day postage (rm before 1pm). Price is based on the fact that an identical package, with a lower spec G17.5 MOS sold for £315 just yesterday.

Russian 6m2 noise cancelling headset work fine as it should £100 (postage included**sold**)sso pistol holster £20 (postage included **sold**)/2x idogear shooter belt muticam and olive drab size L with inner belts size L both belts with inner belts £25 eatch (postage included )