All Activity
- Past hour
-
HK 417D (long) highly upgraded DMR (easy conversion to full auto)
1967PF44 posted an advert in Electric Rifles
Time Left: 6 days and 23 hours
- For sale
- Used
I bought this on this site a while back, and I have had a lot of fun with it, but I’m older, and have developed a shoulder issue, and this is a heavy bit of kit. weighs in at over 5kg Price £420 plus postage £15, if that puts you off, will save you a read, if not have a look at what’s on offer. Message with any questions or if you want more pics or a firing video it’s a Umarex/VFC based DMR set up of the model 417. Full trade marks are present and the over barrel suppressor is included it currently shoots just north of 425fps on a 0.2g bb, and does not appear to suffer joule creep with heavier weights and the hop properly set. I was running .36s which for me gave the best balance of power, range and accuracy I’ve used the description from the previous seller which I believe to be accurate based on the checks made when I received this fully rebuilt from the inside, from mosfet to motor to cylinder head, even replacing the gearbox casing entirely with the retro arms precision CNC'd aircraft grade Zinc-aluminium shell, due to a known issue where the OEM gearbox shell is prone to cracking over time or when going up to higher fps. The only thing that has not been replaced is the hopup, which, if you have done research on this model RIF, you'll already know it's one of the best stock hop-ups produced in a replica, rivalling custom made ones. semi locked in a way acceptable to every site I have played, - it simply has no selector ! this can be easily reversed if you want to swap out the spring and return this to the glory of a full auto beast. List of upgrades as follows: RetroArms CNC Gearbox V2.2 HK417 (8mm) QSC -£145.00 GATE X-ASR Plug-In MOSFET12451 ZCI Airsoft Shim Set, ZCI High Torque replacement motor (Long) £35.00, ZCI High Speed Piston with Full Metal Teeth, Rocket M4 Silenced Bore Up Cylinder head, ZCI Non Ported AEG Cylinder - Type 0 Rocket M140 Spring Approx 440fp CRUSADER Lower Receiver End Sling Mount - for Umarex / VFC HK417 × 1 List of additional accessories: Theta Optics 3-9x50 AOEG Illuminated Rifle Scope £69.99 Hard Case with foam £150.00 (equivalent) (not a Nuprol case, but a proper firearms flight case) VFC Umarex HK 417D Hi-Cap AEG Magazine (550 rnd) X 2 @£42.00ea VFC HK417 100Rds Mid Cap AEG Magazine × 2 £21.00 (each) = £42.00£420
-
Time Left: 6 days and 23 hours
- Wanted
- Used or as new
Looking for the above sling / the plate from a stock MWS. Not looking for the CQBR version, just the blank one. Would entertain Magpul ASAP / ASAP QD.NO VALUE SPECIFIED
-
Time Left: 6 days and 23 hours
- For sale
- Used
Gearcraft canteen pouch Atacs £20 azart Emr pouch £15 Sso spectre holster £20£20
-
Time Left: 6 days and 23 hours
- For sale
- Used
zukov akm stock £30 zenit foregrip £10 Both for £35 plus p&p£30
-
Time Left: 6 days and 23 hours
- For sale
- Used
Without markings £30 with markings £35£35
-
Time Left: 6 days and 23 hours
- For sale
- Used
Loads of upgrade parts for the AAP-01 consisting of: TTI CNC Mini Mamba upper this is the same length as the AAP01c and includes the correct length inner barrel. comes with TDC modification for the original hop unit allowing hop to be adjusted with an alan key. Front has 14mm negative threads fantastic condition with very light marks inside from bolt. CTM 22/45 lower, this gives your ASP-01 the look of a 22/45 Ruger. CTM Adjustable trigger, has screws to adjust length of pull and trigger break. 5KU plunger style charging handle and fire selector, this fits the regular AAP-01 bolt and enables you to change fire mode without having to rack the bolt. WALDO Customs enhanced recoil spring and short stroke buffers. price includes postage and PayPal fees£73
-
For those that knew him from here or indeed from Ironsite, I've just seen this on their FB page:
- Today
-
Tackle reacted to a post in a topic:
Gun picture thread
-
Enid_Puceflange reacted to a post in a topic:
TM Glock 17 gen5 mos
-
macar joined the community -
ButcherBill reacted to a post in a topic:
Gun picture thread
-
G36 safety parts / gear box / or even whole boneyard gun
Stryderb posted an advert in Parts & Gear Wanted
Time Left: 6 days and 22 hours
- Wanted
- Used or as new
As above, I'm after the parts circled in red to transfer onto a mancraft engine to get the safety working, so need all those bits, but would take a complete gearbox or even a complete boneyard gun as long as it has those bits! Let me know if you have anything£69
-
Everyone needs a stupid project gun
-
Looks a great book. Always wanted one, but that's a bit pricey for me just for a book. I like watching his vids on YouTube mind. -
goes click or click, click, click again and again?
-
ButcherBill reacted to a post in a topic:
TM Glock 17 gen5 mos
-
Hello I bought an m1a1 thompson from snowwolf 3 years ago with a battery. After 2 years it kept jamming up. I went to an airsoft store to fix it. They said they changed the motor. I tested it and it didn't work. When I pull the trigger it clicks and doesn't shoot. My battery is an NiMH 8,4V 1100mah battery. I think it's because the battery isn't strong enough but I'm not sure. Can someone help me fix this problem please? With kind regards Ruben
-
my G34.5 slide arrived today! Love it 😆 testament to how far guarder have come, this slide was drop in. Just needed some oil. The last gen3 slide I bought from them took hours of sanding to get it to run smoothly.
-
Time Left: 6 days and 22 hours
- For sale
- As new
For very reluctant sale one of the now quite rare original VFC CYBERGUN MCX AEG’s it is in excellent condition and as far as I know it has not been tampered with other than hop/barrel upgrades It will come with the original mag, if I can lay hands on it and as seen in the images. These are hard to get a hold of now in original order, and are by far the best and most desirable version of this AEG. offers around £525 all in will be considered ***price drop £470 I will consider a swap for a TM recoil 417/416 delta custom (must be stock) or part exchange for a good TM Recoil AK.£470
- GB
-
Time Left: 6 days and 22 hours
- For sale
- As new
As above, never used, only put on a rifle for display for a month or so, never fielded. £70 inc P & P£70
-
Thanks.
-
ButcherBill reacted to a post in a topic:
Gun picture thread
-
Time Left: 6 days and 22 hours
- For sale
- Used
For sale only No1, ASG CZ scorpion Evo 3 A1, Aeg, stock internally and virtually unused 2018 revison model comes with 4 mid caps ( there may be more available depending on sale of second Evo) suppressor adaptor, Acetech At1000 tracer and bottle of tracer bbs. Bbs/tracer not in pics but can be supplied on request. The tracer is mint and unused (*** edit pics now added) Gun specific carry bag, with moulded foam interior. original box No2 pictures to be added is another ASG scorpion Evo, but this one is fully upgraded by Simon Moore, probably the best Airsoft Evo tech guy that worked on these, gears, new mosfet, shimmed, speed trigger, hop rubber all upgraded to allow smooth long term operation. this also comes with extras 4 mids, one high cap, suppressor adaptor, reinforced bearing spring guide, suppressor, identical bag, scorpion sling, these both have genuine quick change spring systems allowing you to vary power to match site limits in a few seconds. I will throw in a compatible battery and basic lipo balance charger free with whatever one sells first as for prices I’m not certain on these, but I’m going to say £400 (all in) for the stock one and £480 (worth a lot more) for the upgraded one. happy to share firing videos of both on WhatsApp both chrono around 330 on a 0.2g bb but can be whatever you want or need with a quick spring change. any questions just ask, 07889203365 is my WhatsApp if you are genuinely interested and want videos im active on here so check my messages at least twice a day please have a look at my feedback before messaging. It safer to know you are dealing with a reliable trusted seller before starting negotiations. finally I will probably just sell one of these,I dont have a preference which one, Postage will be Parcel force 48 at my expense from the sale proceeds, PayPal fees are on the buyer£400
- GB
-
Rubenairsoft joined the community -
Some collection.
-
Kman89 reacted to a post in a topic:
Gun picture thread
-
SixOfDiamonds reacted to a post in a topic:
Where to get an Elite Force CO2 Tri-shot Shotgun in the UK?
-
SixOfDiamonds reacted to a post in a topic:
Where to get an Elite Force CO2 Tri-shot Shotgun in the UK?
-
Where to get an Elite Force CO2 Tri-shot Shotgun in the UK?
SixOfDiamonds replied to SixOfDiamonds's topic in General Help
It's a bit of all of the above tbh. Here's what I was planning to do with it 40k Darktide has a semi auto shotgun (yes I know it has a pump on it, doesn't get used in game) Wanna try recreate this, got plans to make the Arbitrators shotgun as well using a golden eagle 870, as that is pump action. General shape lends itself to how this one looks, gonna rip the stock off and build my own around the buffer tube. Been cackling at that for 10 mins straight, good one 😆
-
Time Left: 6 days and 21 hours
- For sale
- Used
Haley Strategic – D3CR- Disruptive Environments Chest Rig In Kryptek Highlander As per pictures, genuine Haley Strategic in decent condition with the branded MP2 Magazine Pouch Inserts. In very good used condition. I'm, looking for £110 all in. Cheers.£109.97
Edinburgh, Midlothian - GB
-
Time Left: 6 days and 21 hours
- For sale
- As new
I am sure I am going to regret this!!! Tokyo Marui MWS M4A1 never been used out side. Was built and test fired and left on a display stand. There are no marks. It has only been test fired for fps testing. Has one new gas tight mag. The upgrades are: Magpul genuine STR stock Millspec stock tube Weighted buffer and upgraded recoil spring Magpul genuine grip Magpul sling attachment Magpul genuine foregrip Geisselle trigger Geisselle trigger guard Hao quick take down pins Jaeger precision buffer weight Jaeger precision NPAS Flamingo hop 360mm full length inner barrel Bavtac zet plate Bolt springs upgraded. Nozzle is original TM Asking £480. Would obviously prefer collection or meet. I live in York. Delivery can be arranged for an additional £20£480
- GB
-
.thumb.jpg.556abdac36557a7237ac1b062eb9e933.jpg)
The 'What have you just bought' Thread
Hatchet replied to Cameron364's topic in Guns, Gear & Loadouts
A few bits. Recently went down the plate carrier route, after borrowing one for a day. Picked up a Warrior DCS, which is good, but doesn't cope with placards. So I bought an AXL adapter panel, which is very thin/low profile and threads into the molle to give you an option to mount placards. This then gave me some options for an MP5 placard, in this case the unobtanium sled. Swapped out the buckles for G hooks for a lower profile, and...
-
Time Left: 6 days and 21 hours
- For sale or swap
- Used
Special price for one week only as moving house as would like it gone prior, if I have to move with the gun I’ll sit on it at a higher price. Probably one of the best out of the box snipers money can buy and this is a bargain at nearly half RRP. Shoots as straight as an arrow and packs an incredible punch. The built in bipod makes for a sleek design whilst also being universal in use. Happy to post£235
- GB
-
Time Left: 6 days and 21 hours
- For sale
- As new
Selling my As new Volante Titanium buffer weight. Bought direct from Volante and was over £260 with fees. it is 485g giving insane recoil. Want £100 delivered.£100
-
Time Left: 6 days and 21 hours
- For sale
- Used
In this ad we have 4 glock mags, 2 are WE which is 1 normal mag and the 1 extended 50 bb mag and 2 Tokyo Marui mags. the extended mag fires fine but the bb follower needs replacing I believe, the other normal mag is fine from my testing. The TM mags are in need of repair, one does not hold gas, and the other needs valve replacement. I just do not have the time. All will come in a nuprol hard case. can show vids of working mags in action. buyer pays postage(£6) and PayPal g+s fees. offers considered£75
- GB
