All Activity
- Past hour
-
I'd estimate between £570 and £600. The internal upgrades improve reliability and flexibility but from a value proposition, they add only add so huge amount as they're replacing original internals. If you have the original parts, you may see another £30-40. If the leaking P-Mag is repaired, that should add another £35. For the benefit of sticklers for detail, do you know the brand and model of the recoil buffer, if the Flamingo bucking is 50 or 60 degree and if the JP nub is the polymer or aluminium spec? It may also be worth pointing out which brand of green gas you're offering.
-
purp1e joined the community
-
I had bought this gun from someone then realised i dont have time for the headache of looking after and taking care of a GBBR properly so before any problems arise i rather sell it for a good price to someone who will look after it properly Please note: Includes 1 Pmag which is leaking gas which i will give for free (unless i get it serviced and repaired before a buyer comes) I can also add 1 green gas bottle for £7 each Have 2. Scope not included Upgrades: Waldo dynamics return spring Jaeger precision Hop Nub Flamingo Bucking Unicorn reinforced Nozzle Set Federal concepts Npas Recoil buffer Wasdn torch and mount Fore Grip 3x Gas tight mags, ( 1 original tm mag and 2 pmags I also have which will come with the gun: Spare waldo dynamics return spring Waldo dynamics hop arm Original return spring Unicorn aluminium Nozzle Set. Ive used it in garden and in game good condition Only mark on it is inside the magwell where a stone got caught on the mag as I was loading and caused a scratch which doesnt effect it in anyway and can't be seen unless looking inside the mag well
-
I would like to post my replica here for sale where do i start?
Bashir replied to Bashir's topic in General Help
thank you very much! thanks a lot! -
BigStew reacted to an advert: Tokyo Mario MX-177e2 AEG
- Today
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
🔥 For Sale: VFC MP7 Gen 2 🔥 Looking to part ways with my VFC MP7 Gen 2 with a ton of high-quality upgrades and extras. Here’s what you get: ✅ VFC MP7 Gen 2 ✅ 5x Magazines all leak free ✅ Clutch Precision Steel Bolt ✅ Clutch Precision Thread Adapter ✅ 2x Original Muzzle Device ✅ QD Suppressor ✅ Spare Original Bolt ✅ Spare Nozzle with NPAS ✅ MLOK Front End ✅ Bowmaster Steel Backplate ✅ 7-Point Stock ✅ Original Iron Sights ✅ Genuine BCM Foregrip ✅ Spare set of original rails 💰 Price: £550 + postage This setup is in good condition with all the wear marks you’d expect nothing bad or extreme, I’m selling because I’ve moved on to other projects and want this beauty to find a new home where it’ll get the love it deserves. Perfect for CQB or anyone looking for a compact, high-performance setup. Ran it a few times and have very recently serviced it so she’s good to go! DM me if you’re interested or want more details! Serious buyers only, please. Let’s get this MP7 to someone who’ll put it to good use!550.00 GBP
WAKEFIELD, West Yorkshire - GB
-
Dount100 joined the community
-
The limited edition Tokyo Marui rifles are quite collectable. The XM177 isn't one of them as it was a normal run AEG back in the day. Have a look at the GOLGO 13, Burns M653, AK Spetsnaz or any of the resident evil pistols. The Burns rifle is an interesting one. It came in 2 flavours, fixed or sliding stock and the story goes it was released after the movie Platoon and was meant to be the main character "Barnes" rifle but somewhere along the line someone messed up the translation. The AK is just a AK Beta Spetsnaz without a stock but this was released at a time when there wasn't 500 Chinese clones.
-
Cut my kit down to the bare minimum, no belt, just this thing. Looking at something slicker, more comfy but this is pretty spot on for what I need.
-
Jackal joined the community
-
Macks airsoft dreamers of the week thread
Punisher3990 replied to Mack's topic in General Discussion
Sorry, but do old Airsoft guns hold any value like that? For £800 I'd want more than an old, bland rifle ngl, especially when I could just get one that looks the same for like <£100 I mean, I collect RIFs as well as skirmish, but I don't specifically try to get older models, just the platforms I like the look of. RIFs just don't strike me as that kind of collectible (if you get what i mean). -
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
2 GHK PMAG Style Magazine V3 - Leak free Maple Leaf Hop-Up Plus Inner Barrel Has a Samoon NPAs installed Replica red dot sight Replica unity mount Black Angled Foregrip Have done the the Expoxy mod to strengthan the back of the lower reciver in the inside - Have taken a picture of this Will adding the price and FPS tomorowAsk for price
-
Impulse reacted to a post in a topic: Load-Out / Loadout Picture topic
-
-
Impulse reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
MrTea reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
Punisher3990 reacted to an advert: Tokyo Mario MX-177e2 AEG
-
-
Punisher3990 reacted to a question on an advert: KWA Ronin VM4
-
Punisher3990 reacted to a post in a topic: Pricing LCT rifles that take up way too much space
-
tside reacted to a post in a topic: Load-Out / Loadout Picture topic
-
Colin Allen reacted to a post in a topic: The 'How Did Your Airsoft Day Go? Thread
-
andrey reacted to an advert: DE Ghetto Blaster in stealth grey
-
Popped down to dirty dog to try out some alterations I'd made to my kit. First running a 6sh117 vest was much nicer than sweltering in an over loaded plate carrier and definitely allowed me to enjoy myself for longer. Second after making some cosmetic changes to my cyma ak104, swapped the Magpul m lok handguard for a 5ku B10 rail and a nicer foregrip, it was the most comfortable to use replica in my collection. Stock performance has been great since I got it and hasn't needed any tinkering thus far. My usual group all had to pull out last minute for different reasons so I decided to not be a mopey bugger and pop down on my own and have the best time possible. As usual all the usual crowd were fantastic and I managed to get out me shell and socialise out of my comfort zone a bit. The afternoon game required the teams reorganising a bit so I managed to spend both full field games attacking up hill while we moved a mannequin "casualty" from one side of the site to another. First time we managed to get really organised as a team and complete the objective in good time. Second time after the team rejig the enemy resistance was far more effective and we timed out but had my favourite moment of the day. Me and a few other players launched a diversionary attack on the flank giving the dummy carrying group a easier time in getting the dummy near to the objective for a really closely contested game. On a bit of a self congratulatory note after using discovering Airsoft last November as motivation to lose 6 stone it is definitely a lot easier to sprint round a field and have a great time and meet some good people.
-
I would like to post my replica here for sale where do i start?
Cannonfodder replied to Bashir's topic in General Help
The classifieds section can be found here https://airsoft-forums.uk/classifieds/ If there anything you're unsure of how much it's worth there also an appraisals area here https://airsoft-forums.uk/forum/151-appraisals/ -
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale is my VFC Colt 733, only reason for sale is acquiring another VFC AR and getting some funds back from that. The gun has had the following upgrades: Maple Leaf Crazy Jet 6.02mm Inner Barrel PDI W-Hold Bucking VFC NPAS These were fitted to address pretty much the only flaws with 733, which were a lack of FPS adjustment and a poor quality bucking and barrel. The gun is otherwise stock This has been skirmished and taken apart a few times but is overall in good condition as pictured with a few signs of use and small scratches. There’s a more noticeable one under the barrel where the front sight was removed with the grub screw still in. Functionally it is in complete working order, with one gas tight mag. The stock has a little play but has been like that from new, will throw in a 6-position buffer tube which works better. Also throwing in a John Masen style stock pad and OD Lonestar style grip sprayed black I’m looking to sell this ideally but would consider a swap/ PX for a VFC MP5SD or JW4 TTI Viper Please PM with any offers or questions Thanks!375.00 GBP
-
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale is a DNA M16A2 profile steel outer barrel, in good condition and only test fitted. These require a DNA FSP or modifications to a VFC FSP to fit, as well as being threaded for 1/2-28 (AKA real steel) as opposed to 14mm. Otherwise these are a drop in fit for a VFC. Will also throw in a new 5KU Rifle length mock gas tube Please PM with any offers or questions Thanks!40.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale is an M203 launcher+ M16 heatshield combo, sold as seen hence the low price. Does come with full barrel mounting hardware but I can’t guarantee what it will or won’t fit. Missing the leaf sight and trigger guard but otherwise complete Please PM with any offers or questions Thanks!45.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
For sale is a ZPARTS Ergo M4 Front rail extension, in overall good condition as pictured. Test fitted but never skirmished with and complete with all fittings BCM KAG and Sling mount can be included for extra Please PM with any offers or questions Thanks!40.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
All are in good condition. Few Scraches but nothing noticeable when wearing. All of these come with a Microfibre Pouch to store the glasses in. 1: British army ballistic glasses £15 2: Bolle Tracker Glasses £10 3: Bolle Cobra Hydrid Glasses £10 4: Bolle Cobra Hydrid Glasses £10 Tan Knee Pads - £6 Green Knee Pads - £6Ask for price
-
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Selling my WE Glock 17 Gen 4. Comes with 3 Magazines (In the picture it shows them all with baseplates but I have managed to loose one of them. Two magazines with base plates and one magazine missing a baseplate) and pistol box. I have added the maple leaf hop unit and inner barrel. All magazines are gas tight FPS is around 270 £110 inclusing paypal fees100.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- NEW
For sale is my Specna Arms SA-A03M chaos bronze edition MK18. Gun Box with instructions, stickers (2 have been used) - Box is a little bit damaged - See photo of box to seem damage 5 PTS EPM mid caps mags Nuprol 7.4v Lipo stick battery 1300mAh Nuprol 7.4v Lipo stick battery 1200mAh Upgrades: Prometheus purple bucking 6.03 tightbore barrel Prowin hop unit I believe I have upgraded the gears, piston and piston head but I cant exactly remember what I got done to this. Gun fires fine and firing at 344fps to 348fps on .2's with really good range and accuracy. The bad bits is one of the clips on the buttpad has snapped but this isn't an issue as the pad is bolted in place when the battery is installed and doesn't affect performance. The box having a rip in the top The bolt catch pin is missing. Has been replaced with a ziptie (you can see this in the 7th photo) but still works perfectly. Any questions feel free to ask. Open to offers Looking for £300 which includes postage and PayPal fees300.00 GBP
-
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Slimming down the collection a bit. The Marui MP7 AEP. Anyone who’s used or seen these would know they compete with most AEGs you find at your local skirmish. They’re absolutely excellent! Love mine but as a backup gun to my GBBRs I can’t justify it making the cut, and I’m raising money for other things. This has the Laylax PEQ Battery adapter installed. Fantastic upgrade allows you to run bigger 7.4 lipos. And this thing Rips. 250FPS on a 0.25g is respectable for something this small and quiet, and the rate of fire is quite satisfying. PACKAGE INCLUDES. - Gun, original magazine (short) and original flash hider. - 10 x Mid Cap magazines (100 rounds ish) 4 are WELL (metal) & 6 are MAG (plastic) - The Laylax kit installed - the PEQ - the thread adapter - the mini SOCOM 14mm CCW suppressor - the SOTAC trijicon micro dot sight and mount. (To be honest the dot is missing a screw and the adjustment doesn’t seem to do a lot, but I don’t need it and it looks cool as a placeholder, the mount is probably the bast bit) - 2 x PEQ box 7.4v Lipo Batteries VERY VERY GOOD CONDITION A couple surface marks on the metal parts in a couple places. Otherwise pretty pristine. Very clean looking. I have the original box but it’s in storage and I don’t know when I can get to it. It won’t all fit inside it anyway. But I can either wait until I have it to post, or post without (still very well packaged, or post the original box to you at a later date. price plus £10 postage.300.00 GBP
-