All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- For sale or swap
- Used
Got this second hand a couple of weeks ago to get me started off in the sport, but I decided it's not my style and i want a different style platform unfortunately. i've not field tested but, tested on the garden & everything works as it should, will come with both scope & red dot sight, charger & battery + 2/3 extra mags if i can find them. Will be great for someone starting out i'm sure! Collection or Postage at buyers expense. comes with original box. Here's my number for WhatsApp if you'd rather contact through that 07494769580.£120
, Nottinghamshire - GB
-
Exactly, too many people are way too happy to think it won't happen to them and start to get complacent with safety. Did anyone hear what the outcome of that lawsuit was? -
Tackle reacted to a post in a topic:
CYMA platinum issue? Battery turns off if not used for a while, works fine if it is replugged
-
Are 11.1s correct for my gun after the work that has been done to it???
Tackle replied to Wegalaxy's topic in Electric Guns
So, in essence, what your saying is...... You wankered it 😜
-
Cannonfodder reacted to a post in a topic:
CYMA platinum issue? Battery turns off if not used for a while, works fine if it is replugged
-
Could, and did. I now wear shooting glasses in "safe" zones and even car parks because far too many players and sites have this "lol" attitude. -
Rogerborg reacted to a post in a topic:
CYMA platinum issue? Battery turns off if not used for a while, works fine if it is replugged
-
Rogerborg reacted to a post in a topic:
CYMA platinum issue? Battery turns off if not used for a while, works fine if it is replugged
-
Rogerborg reacted to a post in a topic:
PLEASE HELP!
-
Nex0Gen joined the community -
Time Left: 6 days and 23 hours
- For sale
- As new
Very good condition Never used in game With original box comes with: Barrel removal tool x1 Front & Rear sight x1 Single Mlok to1913 rail x2 12mm-14mm thread adaptor x1 Front stop x1 ( without screw it’s because the factory forgot to included in the packaging) Gas Magazine x1 Precision CNC T6061T6 Aluminum Upper Receiver, MILSPEC Type III hard anodized finish Precision CNC T6061T6 Aluminum Handguard, and mock suppressor (SD models) Precision CNC T6061T6 Aluminum Billet Bolt Receiver Precision CNC S45C Steel Internal Parts Bolt Lock Buffer Feed Nozzle Buffer Steel Outer barrel with thread on Tri-lug flash hider Steel 12mm to 14mm CCW thread adaptor 6.03mm precision honed inner barrel TDC Direct Pressure Hop Up Unit with TM MWS Spec Bucking Aluminum ambidextrous non reciprocating charging handle Multi position steel telescoping stock with rubber buttpad (K models) Side folding polymer "UMP" style stock (Full sized models) IMI Style flip up sights set AR Style pistol grip M-LOK interface 1913STD. accessory rails Front sling mount / hand stop Inner Barrel: 129mm (6.03mm ID) Weight: N.W. 2350g / G.W. 3050g Length: 375-553mm (Stock Folded / Extended) Insert image from URL£330
- GB
-
Time Left: 6 days and 23 hours
- For sale
- As new
King arms p90 poly body Painted cosmic blue, colour shift. Think of the couloir shift paints on need for speed underground, original colour is tan Shs 13-1 Steel tooth piston Oversized Pom piston head Lonex cylinder head Aluminum nossle Prowin billet hop Maple leaf rubber Omega nub Laylax mag release Factory tight bore 6.03 FPS stainless cylinder M90 spring (1.1j on .25) Basic mosfet Wired to deans Kyrtac low rail (includes original rail) Krytac battery extension (needs trimming to fit) Optic not included 1x viper double mag pouch, if I find the other it will come with 2, X1 ka hi cap, occasionally has feed issue X2 tm hi cap id strongly recommend mid caps in this 7.4v 2200 giant power battery the replica and internals have seen 3 half games days worth of use. Approx 1500 rounds collection or postage fine the replica will come in a soft shell case listed price includes postage and PP fees£300
, Linconshire
-
Lozart reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Macks airsoft dreamers of the week thread
Cannonfodder replied to Mack's topic in General Discussion
I want to know why they put the rear right so far forward -
Cannonfodder reacted to a post in a topic:
Macks airsoft dreamers of the week thread
- Today
-
Time Left: 6 days and 22 hours
- For sale
- Used
TM MWS URGI rail & nut TM MWS outer barrel TM MWS inner barrel come off the TM 11.5” URGI Looking for £80 posted£80
-
Are 11.1s correct for my gun after the work that has been done to it???
Quagmire replied to Wegalaxy's topic in Electric Guns
Last weekend I killed my Specna Edge, I'd dropped some 14:1's in as I'd calculated that with the motor I was running I would get about 24-25rps on 11.1/3s and a more realistic 18rps on 7.4/2s. Lo and behold after fitting the gears and re-shimming it came out great. I am lucky to have access to a piece of private woodland and we tend to play semi or burst, no auto allowed. I was very much enjoying my new improved RoF when in the last twenty minutes of game day I noticed it started to miss the odd BB, I changed mag thinking it might be this, then it started making a grinding sound. I stopped and switched to the communal "backup" Specna flex M4 we collectively purchased for such occasions. Stripping it down at home showed that the bearings had disintegrated on the selector plate side of the box. The bevel gear and spur had dropped and teeth were partially ground off the bevel in the couple of short trigger pulls it took for me to go "wtf is going on?" and realise I had a problem. On the day I was running a brand new 11.1/3s 2200mah turnigy nano-tech battery with a max discharge rate of 70c, so I think this may have pushed my rate of fire up a bit, as I imagine there would be very little voltage drop under load on this compared to my older butterfly/nunchuck lipos. I'll be fitting bushings, and see how that goes.
-
Tackle reacted to an advert:
Grunt Style USA Import “Toast to Freedom” Tshirt M
-
RedBloodCell joined the community -
https://www.airsoft-hub.com/item/38913-dpd-aeg-bundle That has to be the most expensive Nuprol AEG I've seen. The case won't push the price up that much and the bargain bin mags most certainly won't either.
-
Are 11.1s correct for my gun after the work that has been done to it???
Austeyr replied to Wegalaxy's topic in Electric Guns
You absolutely can run an 11.1v, the aster will take care of the majority of it. -
Airsoftt reacted to a post in a topic:
Specna Arms - Feeding issue on some mags
-
Are 11.1s correct for my gun after the work that has been done to it???
Airsoftt replied to Wegalaxy's topic in Electric Guns
11.1v is going to put more strain on the gun and potentially make it break faster. If you want the best trigger response: 11.1V If you want to try to prolong the life of your RIF: 7.4V You've put a fair amount of upgrades into it, and its your only RIF so I would say go for 7.4v. Or potentially buy another RIF as a backup for when you need to repair your primary. -
Kinda wishing I’d kept it! 😩 -
Airsoftt reacted to a post in a topic:
Legit tactic or...
-
https://specnaarms.com/wp-content/uploads/2024/04/HAL1_manual_EN-PL.pdf HAL comes shipped in safe mode out of the box, connect the battery with the RIF in safe then wait for 3 seconds (for the beep) and hold the trigger for 5 seconds What did you do to the gearbox exactly? And which model RIF is it?
- 1 reply
-
- 1
-
-
Time Left: 6 days and 21 hours
- For sale
- As new
Asking £ 299 Retail price & parts list below TTI AAP-01 PCC (carbine kit) - £175 PDW stock - £65 AAP01 - £80 M4 Barrel Guard - £30 Maple Leaf Crazy Jet inner barrel 6.03 180mm - £30 CTM advancedLight weight bolt 7075 - £80 Steel hammer assembly - £40 TTI Hair trigger - £20 Maple leaf autobot 60 bucking - £8 Action army CNC hopup chamber (has been filed slightly to fit carbine kit and TTC hop system) - £50 Maple leaf crazy jet 220mm 6.04 - RRP £38 Total RRP = £600 + Your price £299 Condition great 07960909384£299
- GB
-
Hi everyone, last night, I decided to open up my newly bought gun, as it was in semi auto, didn't even have safe, and try to fix it, cross referencing with another gearbox at the same time, I just put my main rif together and the Specna Arms HAL is flashing red, I'm not sure what to do at all, and pretty worried now both of my rifles are ruined. Thankyou
-
Your Aster unit is likely damaged or has a wiring issue. The flashing red light usually means an error or short. Check for gear misalignment or mechanical binding and inspect all wiring connections. If everything looks fine mechanically, the Aster may need repair or replacement.
-
Braydon joined the community -
The retail price in Japan is going to be £129 for the G19 and the P320. I wonder if we will see the first £200 TM pistols when they get to the UK retailers.
-
HBHB joined the community -
Time Left: 6 days and 19 hours
- For sale
- As new
Selling this beauty HK MG4 by VFC. Currently a wall hanger. It brand new , never fielded. Comes with orginal box, instruction and accessories, 1 electric box mag + 1 custom sack mag ( aestetic only) The MG4 is made in aluminium CNC, is lightweight 3.7 kg only so can be easily used in the field for long games. It has an internal mag of 900 bb or can be fed from the external boxmag of 4000 BB Elcan is not included, but I could accept an offer Price 950 GBP Collection preferred , but I can post as well. I can evaluate a partial exchange with GBB rifles or Marui NGRS AK105£950
Didcot
-
deadshot3836 joined the community -
Sterbem_Lee joined the community -
Time Left: 6 days and 13 hours
- For sale
- Used
of the best aegs I have had the fun of using Super rapid n responsive Wicked mosfet Upgraded trigger n gaurd as 1 it came with was not site legal do have n can include original comes with 11.1v battery Still on mini tami will change if I find time one those clear mags everyone is raving on about only selling as gone hpa n unfair to just keep this for the sake of it. drop stock really great if wearing mask super comfortable Also comes in original box Original price was £340 plus battery So grab a bargain at £199 Happy To answer any questions or for you to try b4 u buy Or send video n post via PayPal or bank transfer 07960909384£199
Fulham
- Yesterday
-
Time Left: 6 days and 12 hours
- For sale
- As new
SIG Spear Lt 11.5" APFG and its magazine £700 This price includes the SIG Air telescopic stock, as I no longer have the original one. - 6 VMAG V3 No-Leak 6x £60 - GSI hop-up arm ~£50 - 285mm barrel and 60° Unicorn rubber £60 - AR15 Airsoft Artisan stock adapter £70 - CTR and Rizer Larue clones ~£40 - A new adjustable velocity nozzle. The original one is also included. It's broken at the tip, but I installed an HRC adjustable valve in it, and it still can be useful. BCM light/switch and grip are not included, but I couldn't be bothered to remove them for the photo. ^^ The replica saw the field 5 times, the patina on the bolt is normal (I had the 9" version before, it did the same thing). 3 flaws: - One of the handguard screws is loose, no effect because the handguard is tightly tightened to the barrel. The screw is included. I got it like that - The plastic spacer on the barrel is broken. I didn't replace it because the barrel has no play, and it's a piece of crap that breaks on the first disassembly. - I replaced the two screws holding the outer barrel because they were crap. It's not really a flaw, but they're no longer the original ones. The original ones are included. It works very well, shoots far and straight. The lot costs nearly £1,300 in total; I'd ideally like £950, without shipping. It come from France ! The last photo is just an example of custom. Thanks for reading!£950
- FR
-
Tommo23 joined the community -
Time Left: 6 days and 12 hours
- For sale
- As new
Here we have an unskirmished TM M14 polymer stock with Lone Star Tactical scope and CYMA optic Mount (only one of the screws is present as the other mounting screw didn't fit! Still functional fine and on there solid as can be!) Gun is stock except for a deans conversion! Will ship for a fee£220
London - GB
-
Time Left: 6 days and 12 hours
- For sale
- As new
Toast To Freedom T-shirt Grunt Style Print Liberty Medium. THESE ARE A LIMITED RUN! SHOW OFF LADY LIBERTY HOLDING A BEER! PERFECT SUMMER TSHIRT! Selling as I bought two by mistake and it will cost too much to return to 🇺🇸. It cost me £25 plus £23 shipping and a long delivery time (around 3 weeks). I’m asking £25 plus £3.50 shipping (2 working day delivery). PLEASE NOTE THAT THE UNOPENED TSHIRT IN THE PHOTO IS NOT THE ONE YOU WILL RECEIVE. YOU’ll RECEIVE THE UNOPENED ONE IN THE PHOTO WITH ORIGINAL PACKAGING. Any questions pls ask!£25
- GB
-
Time Left: 6 days and 12 hours
- For sale
- Used
For sale, airsoft tool kit which I have built up over a number of years. Include tools such as TM MK18 barrel nut removal tool,HAO PTW tool, Tamiya cera grease ect. Please look at pics for more info. Everything less the RIF is included. Collection is possible from Ashford, Kent. If collecting, I’ll sell for £180£150
, Kent
-
Time Left: 6 days and 11 hours
- For sale
- Used
Having moved house and having space for real storage, I no longer have use of these rifle bags and case. Top left: (I think) SRC rifle hard case in tan with wave foam. A few scratches from being taken to the field but otherwise good condition. Due to size and weight, this will be sent with Parcelforce. 105cm x 35cm approx - SOLD SOLD SOLD Top right: Mil-tec heavy duty black rifle bag. No middle divider but easily big enough for two rifles. Three big front pockets and internal zippered storage on the inside. 103cm x 30cm approx - £25 Bottom left: Unknown brand SMG/small rifle bag in (I think) UCP? Two big front zippered pockets ideal for magazines and one smaller zippered pocket. Has additional zippered storage inside. 82cm x 30cm approx -SOLD SOLD SOLD Bottom right: 8 Fields Tactical padded Double Rifle bag in multicam. Zip pocket on the front with elasticated magazine storage. It DOES come with the velcro loops to secure your rifles to the internal webbing. 105cm x 37cm approx -SOLD SOLD SOLD The bags/case will be posted with a 48 hour service. All prices include postage and Paypal fees. Open to offers.£25
Hartlepool
