All Activity

From what I remember (Cyma/Cybergun same pew?) I had to shim my Cyma Thompson screw as it was able to be tightened too much to the point it wouldn’t fire but if it was loose the grip was also loose. The same happened on the dodgy KA one I bought off of here a while back, to the point there was at least half a centimetre gap from receiver to pistol grip to get it to work. Not a guarantee it’s the same issue, obviously, but that was my issue so maybe the same for you?

There aren't any, you gotta import them

Yeah if that solves the problem try it for a while. It will loosen up but hopefully still do the job

I wonder what a none working SomoGear MK1 Ngal would bring ? Thank you to everyone who has replied to my original post I genuinely appreciate the advice and guidance.

Maybe im going mad, but really struggled to find a madbull adaptor that is in the UK

My god! Stress levels 100000x fitted the wood kit, a few amendments needed not an issue. Plug her in, ran a few mags no issues. Then just went dead. Took her apart, checked the fuse, checked the connections, no issues, took the motor out where it sits plugged in, Pew pew! Awesome! Screwed motor back into place, attached battery, NOTHING. Took the motor back out, tested again, ABSOLUTELY FINE. Put it back in position, DEAD. Did this numerous times. Am I missing something blindingly obvious!?

The more you use it, the Velcro will wear in and make it easier whilst still securing it better

Cheers for the reply all, to answer @EDcase, no I can't pull the mag out. I had some velcro strip laying around, have shoved some of that in the magwell, seems to have removed the play, bit too late to test atm though, might upset neighbours. Only trouble is it has made it a bit of a pain to get the mag out, but is something I can live with

I think the 'click'is just the mag touching the top of the mag space. When the mag is in can you pull it out without pressing on the mag release? Rather than modify all the mags out might be possible to add a shim or JBWeld to the top of the mag catch

Two possible solutions: 1. Find a hop unit with a somewhat longer feed tube. 2. Shim the top edge of the mag catch recess on the mags.

I'll give you £101 the you've made a profit 🤣

One of the sites that I frequent has a 60m range, which is slightly inadequate, so I have used Google Maps to identify a spot that is 70m from one of the helicopters and has a clear line of sight to it. The other site does not have a range so I have identified a spot that is 70m from a structure. If I have been fiddling with a gun, I take my box of springs, some hop rubbers and nubs and my toolkit and arrive early and spend time setting it up.

Just reminds me when I ordered a new graphics card for my gaming pc & 'felt the need' to keep my spending to myself, I set the postal address to my work (tesco) but the bloody courier took it to the wrong tesco WHERE MY WIFE WAS A MANAGER!

But trying to fit it is a basted! Probably not a job to do after a few vinos 🤣🤣

The one time the phrase... 'I honestly didn't order it' would have been true.

Yea I did join the airgunforums.co.uk searched for a specific post about a custom SVD project politely congratulated the person on the amazing job they did on a wooden stock mentioned my own project and was banned instantly for Spam. I do have a a lot to contribute, thanks for feed back. Also I would not say the modifications are exactly cheap. The Pidik Mancraft HPA engine £300 after post, and real soviet stock and hand rail guard are not cheap looking at £500 ALTHOUGH I got mine on etsy from a seller in Ukraine at the time of the Crimean annex which was a huge score, neither is a full steel billeted collector addition WE ACE SVD with increased power nozzle adapter from Hong Kong, HPA magazine mod, Custom Steel CNC bolt from Clutch precision, and Custom hand made wooden Stock and hand rail form air Soft Shien, but hey what ever , I am figuring it out on my own, thanks for piling up , and taking the P*ss out of me that was helpful. 🤗 I was looking to sell them once completed, as I have a client at the gym who is making me a 12 shot PCP to fit inside an svd frame , and i have purchased a scroll saw and some quality reclaimed wood to make my own stock. but forgive the naivety regarding my previous interactions at the forum. Thank you. I did find the Ace We stock maker that way , you are right. and yes the Pidik went in , its awesome. and to be honest i have alot to say but i am now afraid to comment more on the Co2 system and what happened with it lol

Hello all, Hoping somebody can give me a hand again, got some new EPM1 magazines to try fix my feeding issues, but the aeg will only feed properly when I push the mag up with an audible click, if I do not hold it in that place it drops down again but is still attached to the magwell, just will not feed. I have attached a video of what this small push and click looks/sounds like. Thanks in advance

Update. Well! We don’t know what actually happened. Rang PB, they said my delivery was due out today after not being in yesterday, despite me taking in the incorrect order!? So we were all confused. But it has actually arrived this evening! I was also awarded a £10 voucher from PB for being honest about receiving somebody else’s order and collection has been arranged for DPD to collect incorrect order tomorrow. And both times the wife hasn’t been in ask me what I’ve been ordering! Everything is well in the world 🥹

The cardboard bit is only a sleeve around the actual ammo holder, though, not like it's structural or anything.