Unread Classifieds since Last Visit

Does anyone have this available for sale? I have been looking for this for years as every site has this kit sold out.

Hi RobHedly, following up on our conversation we had back 2022. Are you still not selling? Anyone have this gun kit for sale?

As a lot of threads end up with one of us recommending the Tokyo Marui MWS, and i get PM's asking about it, i figured I'd start a thread to keep all of the information in one place. Here i plan on covering a general overview of the gun, as well as upgrade parts, general maintenance and tuning. If anyone else wants to share any information, guides or even gameplay with their MWS, here is the place to do it. With that being said, lets get on with it. I've had my 2 Tm m4 GBBR's for a little over a year now, and they've got through dozens of changes to get them where they are today. Out of the box they are beautifully finished and boast impressive performance. I bought my first one from Zeroone, who price matched it for me. At the time the gun set me back £430 and the magazines £35, but they have risen quite a bit in price in most places. The gun is incredibly well finished and sports a Cerakoted receiver. Before opening the box, i didn't get what the big deal was about Cerakote, but that all changed after using it over time. The finish is VERY resistant to the hard life I've shown it, and is far more scratch resistant than any paint or anodization on any other gun I've owned. The two I have still don't have a scratch on them. At the rear is a standard m4 stock, which does its job with little wobble, but isn't the nicest one I've ever seen. The railed handguard is very solid and nicely finished with all of the correct numbered markings on the rails. From there you have your usual front triangle iron sight which DOES NOT have a sling attachment at the base. The magazines hold 35 BB's and have a Cerakoted shell to keep them from scratching easily. They have very recently started coming with silent fill valves, but are mostly the normal kind that hiss when filling and spray liquid propane when full. Its worth noting that the valve sits at an angle to the baseplate. One modification i would highly recommend to do is the "green gas mod" which involves removing a long zinc tube from inside the magazine. This allows more gas into the magazine and upping your shots per gas fill dramatically, with some people reporting 150+ shots from a single gas charge. As a side note, i have started to just cut the zinc tube about 1 inch from the base instead of removing it entirely. A video showing how to do it: Chronograph Results: using blaster .20 BB's and green gas i got around 298 fps with a deviation of 2FPS. yes, you heard that right, " FPS. This thing is incredibly consistent! Important information: The inner barrel is 250mm on the 10.5 " CQBR and the 14.5" carbine, meaning on the 14.5" outer you can fit a much longer 370mm inner barrel. The Hop up adjustment dial is similar to Tm pistols and can be located inside the upper receiver by locking the bolt back and looking down the magwell. Due to the way the outer barrel is cut, it's not possible to fit an aftermarket rail onto the gun without one of two things. A barrel adapter ring (PTS, ORGA and a couple of others make them and usually cost £10) or A dytac outer barrel, which has a wider lip, as shown below. Dytac on the left First shots: I took it down to the 20m range at the First and only shop and loaded it up with .28 blaster devils. They had multiple targets there, but i focused on the little spinning targets at the back wall. The orange discs must have been no more than 1.5 inches in diameter and i was hitting it virtually every time with the iron sights. So far, very impressed with the accuracy. So much so, I treated it to a new dress! First internal upgrades: After speaking with Dave about the gun, he explained that the gun wouldnt hop really heavy weight BB's with the standard nub. because it was hollow and squished when applying hop pressure. To remedy this he machined me a great little nub out of brass. Isn't it beautiful!? This meant i could now lift much heavier BB's increasing my range and accuracy even further than the already impressive stock performance. Using this new nub and GEOFF .32 bb''s i was able to get the bb's out 60+M with a flat trajectory. They were making a 1.5-2ft grouping on the plastic bales as seen in the video below. I have SOOO much move to cover, including barrel reviews, customs mods and a DMR build, but its 5;30 am and i need to be up in an hour, so we'll continue this tomorrow

This area gets no where near enough use, but that can easily change Post up any pictures of guns or related items. I've only got one or two pictures atm but ill get more on Saturday And

Getting into support gunning. Started setting up my rpk

Raresoft is set to become the UK distributor for Viva Arms products. Lots of historical replicas otherwise unobtainable will make their way to UK shores soon... MG34 Maxim M1910 M19A6 M19A4 ZB26 Just to name a few.... There will also be separate CNC gearboxes available.

Viva Arms seem to be hinting at a Nambu Type 14 pistol... What a glorious time to be a WWII Airsoft collector

Thought it would be a good idea for everyone to share any good bargains they have come across withe the rest of us Every pound saved helps, especially in this stupidly expensive hobby Anyway... Brand new MAGPUL MS2 Sling - £5.58!!! Just bought one last week you can find it here: http://tinyurl.com/magpul-ms2

15% off at firesupport until Monday 18th august 15PERCOFF2025AUG

Relying to my own post above, the only workable way to fill the GM mag is to eject the shell and lock back the follower which is a bit of a faff. I destroyed my speed loader this weekend trying to load this and my DE stanag mag, then borrowed someone else's loader which lasted one mag before shattering a BB inside itself jamming the feed chute. So I'm now on the hunt for a better speed loader. The 6mmProShop one's look good but they are only available from the US with hefty shipping.

Ladies & Gents, as it has been suggested by several people and requested several times recently, I have decided to create a new Quick Questions thread. We have two threads previously like this, but I've decided to make a new one with a little more structure. When you ask a question please do so using red writing that way, it's easy for people scrolling down to find a question. When you answer a question, please quote (this will make sure the person gets a notification and they can click on it to open your answer straight away and it also lets people answer questions from a while ago if there have been new questions since then) the question and reply in blue writing so we know it's an answer. If you feel a question simply cannot be answered in one brief post, or is open for a lot of debate, create a thread to discuss it, and link the thread in your answer so everyone can find it. This should keep it clear what's what. Thread will be periodically preened and cleaned, and I may, if the whim takes me, create a section in this post with all the questions and the best answers in expandable boxes so everyone can see them forever and ever and ever. If your question or answer don't follow the requested template, I will either fix them if I like you, or delete them if I don't because no-one should have any difficulty getting it right after the first couple of attempts. Here's an example of how I want this to look: ====================================================================== Hi everyone, what am best gnu? ====================================================================== Best gnu am banana. ====================================================================== Go wild kids.

Any opportunity to put my hands in my pockets.

Right I shall start us off with my small but ever growing collection. For now all the guns are stock parts. First off my TM M14 socom: Galaxy MP5k PDW: JG MP5A4: Bell M1911 GBB: Finally the whole collection: Nutster

Hello everyone, I am from Taiwan, sorry, my English is not good. This is my custom gbb, all handmade. 【CUSTOM GBB】 Mauser Model 712 "Schnellfeuer" Machine Pistol Chinese contract basic version SN/31232 WE M712 base toy and real gun toy and real gun toy and real gun toy and real gun after and before

custom gbb workshop sig p365 xmacro vfc gbb para bellum kit

Worth noting for those AKX owners: - Hephaestus do a very good NPAS Nozzle. - dragonworkshop do a complete after market nozzle replacement. - FEDA do a nozzle shell replacement that promises a slight boost in FPS.

Hey everyone, looking to get a TM AKX and just wanted to gather some thoughts and opinions from current AKX users. I have a few questions that I would be thankful if anyone could provide some guidance on: - Was wondering if any one had any reliability issues with their RIF, such as any dramas with the internals like jams or breaks after a certain number of uses. - Any recommended out the box upgrades to internals, I've heard for larger BBs its recommended to upgrade the hop up nub, but was wondering if there were any other internal upgrades recommended. - Maintenance recommendations, I've seen some people use a graphite oil to help remove or prevent any rust. Any help would be greatly appreciated! Thanks!

A gnatty little RS Arisaka hand stop for my OSW

-M16/M4 Weaver Base Rail -Viper Single Point Bungee Sling (O/Drab) -M100 Stainless Spring

Ah - where do I even start. The Tokyo Marui AKX is where it all started for me, my first ever airsoft gun. Some say I jumped straight into the deep end with it but if you ask me, it’s the only way to do it. A gun I’ll never sell, I’ve even started stocking up on spares to further future proof it. I’ve had it close to 2 years now and I now own 5 guns including an M4 MWS, I can comfortably say the AKX is still my favourite of the bunch, never skipped a beat on me. the only ever time it failed on was in the middle of winter at around 2 degrees Celsius on an outdoor field on full auto, the nozzle wasn’t sealing as it had completely frozen up. I warmed up the bolt and mag with my hands and it was back to normality - this issue is totally normal for gas guns in cold temperatures. I must say, the gun shoots exceptionally well out of the box - my first 3 skirmishes I had ran it completely stock internally and it done just fun (as expected from a Tokyo Marui) however it did lack a little punch, so I updated the following: (I went balls deep in on the upgrades) - tight bore inner 6.01mm barrel 250mm length, which yes - does slightly stick out of the front when the muzzle is off. Some people did say it was too tight for an auto capable gun, to which I would ever so slightly agree I think the 6.03mm barrels would do just fine. But the 6.01 never let me down and enables absolute laser beams. - QU4D hop rubber, at first i put in as experimental because they were new on the market - it’s safe to say I haven’t looked back and now have one in my MWS. - 70degree hop nub, you can comfortably hop .30g BBs stock, I just went the extra mile. - ibex NPAS, great little unit would recommend holds its adjustment without fail. - Bavtac 115% recoil spring, you’ll realise quickly the stock spring feels very sluggish and lifeless. Again, would recommend if you’re after that snappy realistic bolt kick. - heavy recoil bolt weight, in all honesty probably not needed. I’ve also bought a Airtac HPA adaptor, lines and tank for it too but nowadays I’m after realism, I’m currently running 6 gas mags. (The reloads are just too satisfying). I won’t bother going into the furniture but one thing I would say is to change out the stock, it’s in my opinion the worst thing about the gun. all in all, I’m about £1,500.00 into and yes it’s a lot of money for what is in reality a toy. Would I do it again if I didn’t have the AKX, yes I fucking would. Honestly for anyone thinking of getting an AKX or even the AKM - what a platform it is. (I can assure you that the grip is now on the gun the correct way round ?)

I've got an E&L Essential AKS74un that I use for CQB. I've changed a few of the externals to make it more ergonomic. I'd like to change some of the internals just for the sake of it. I'll probably change the barrel, bucking and mosfet as per the recommendations above. Is there anything else you'd recommend changing internally to make it more efficient at CQB? The sites I play at use either two or three single shot bursts.

I’m looking to upgrade my E&L AK74 but I have been looking around and no sure where to start. Has anyone who done any got recommendations and sites if possible:)

Mods feel free to close/remove There was a thread like this on another forum (Now closed) were we would scour the airsoft forums of the UK looking for dreamers asking outrageous prices for secondhand goods. Id rather this didnt turn into a sh*t slinging thread just a general laugh at how crazy some peoples prices are. I know myself and monty are usually on Z1 disliking the crazy prices already so if youve found some we have missed post away. Try and use the format below, Ill start Cyma Glock 18 AEP - £70 plus postage and paypal fees!!!!!!! http://forums.zeroin.co.uk/showthread.php?257805-CYMA-Glock-18c-desert-tan-%A370&p=1385858#post1385858 Brand spanking new = £32.79 http://www.taiwangun.com/en/cm-030-tan-cm?from=listing&campaign-id=19

Oh! ?? I've told him im happy to refund it but he's just left me on read, again! I've also offered to send him the thread tap for the handguard but has also left no reply...

Probably a smart idea haha