Governor Posted February 9, 2012 Share Posted February 9, 2012 Hi, I need a bit of help, I want to get a spring sniper but I need to be able to get the parts to change it to and from 360fps - 500fps (Local site and Ground Zero) I don't really mind what sniper it is but not Double Eagle, HFC etc. Has anyone got any ideas on what would be the best to get parts for etc. Thanks, Albert Link to comment Share on other sites More sharing options...
paperpirate Posted February 9, 2012 Share Posted February 9, 2012 jg vsr 10 mate, decent out the box and fully TM compatible and very upgradable had mine a few years and swapped a few parts, still getting 400-405fps consistantly Link to comment Share on other sites More sharing options...
Supporters Airsoft-Ed Posted February 9, 2012 Supporters Share Posted February 9, 2012 Other people might tell you this is a bad idea, I'm not into sniping so I don't know, but if you look on Zero One then you can buy a few of the Tokyo Marui VSR-10 sniper series pre-upgraded. They're quite pricey but it'll probably come out cheaper than if you bought the gun and all the parts separately. Link to comment Share on other sites More sharing options...
Supporters M_P Posted February 9, 2012 Supporters Share Posted February 9, 2012 As Ed says, tm Vsr 10, look for second hand pre upgraded ones they can go for quire cheap Link to comment Share on other sites More sharing options...
Governor Posted February 9, 2012 Author Share Posted February 9, 2012 Thanks everyone! Link to comment Share on other sites More sharing options...
joshcowin Posted February 10, 2012 Share Posted February 10, 2012 ive just got a tm l96 aws and it is excellent,a gorrila could take it apart and the parts are not bad priced on zero one,the sears dont need upgrading as they are solid. Link to comment Share on other sites More sharing options...
Supporters M_P Posted February 10, 2012 Supporters Share Posted February 10, 2012 Knowing tm they will after 400 fps though, I've heard quite a bit about the feeding mechanism breaking too Link to comment Share on other sites More sharing options...
Governor Posted February 10, 2012 Author Share Posted February 10, 2012 Ok, so I have decided to get a TM VSR-10 G-Spec and get these upgrade parts: Laylax PSS10 150 Spring (I will put this in around august) Reinforced sears Laylax PSS10 High Pressure Piston Laylax PSS10 Stainless Smooth Bearing Spring Guide Does anyone know if getting a new piston will loose the quietness of the gun? Thanks, Albert Link to comment Share on other sites More sharing options...
Supporters M_P Posted February 10, 2012 Supporters Share Posted February 10, 2012 The spring alone would do that, it happens, not much you can do about it. I'd say you're better off upgrading the barrel and hop parts first Link to comment Share on other sites More sharing options...
Supporters Airsoft-Ed Posted February 10, 2012 Supporters Share Posted February 10, 2012 Your best bet is to just email airsoftsniperparts about it, they'll be able to answer any and all your questions and also offer cheaper alternative parts. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.