Jump to content

G&G "G2" Gearbox/SR15 E3 MOD2


JinxDuh
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

From what I've been reading, the G&G G2 gearbox is slightly larger and uses a proprietary gear set. There's also work needed inside of the gearbox shell to fit something like a gate titan. 

 

Is the above true, and if yes, how likely is it that I could fit a standard v2 gearbox shell into an SR15? I've heard a lot of good things about the standard G&G G2 but I like options 😂

Link to comment
Share on other sites

My 308's a G2, I've not had the gearbox apart so can't comment on gears. It is however, ridiculously easy to make use of the fact it's already got an electronic trigger and fit a Perun ETU++, which is what I've done.

If it gives me a reason to open the box up then maybe I'll think about something else, until then it's fine as it is.

Link to comment
Share on other sites

  • Supporters
8 minutes ago, Madhouse said:

My 308's a G2, I've not had the gearbox apart so can't comment on gears. It is however, ridiculously easy to make use of the fact it's already got an electronic trigger and fit a Perun ETU++, which is what I've done.

If it gives me a reason to open the box up then maybe I'll think about something else, until then it's fine as it is.

 

Same here, I have the SR25 APC E2 with the G2H box. Now running the perun so I can setup precocking.

Link to comment
Share on other sites

Cheers guys. Not used a Perun before, mostly like Gates due to the bluetooth and I can check the health of batteries etc - May have to venture out to the Perun!

Link to comment
Share on other sites

  • Supporters
31 minutes ago, JinxDuh said:

Cheers guys. Not used a Perun before, mostly like Gates due to the bluetooth and I can check the health of batteries etc - May have to venture out to the Perun!

 

Same here on the Gate preference, I only went Perun because the G&G one would only work on an 11.1 and wasn't programmable. Of course, fitting a mosfet that can only be programmed using the fire selector on a gun that cannot physically be set to auto is...challenging.

Link to comment
Share on other sites

18 minutes ago, Lozart said:

 

Same here on the Gate preference, I only went Perun because the G&G one would only work on an 11.1 and wasn't programmable. Of course, fitting a mosfet that can only be programmed using the fire selector on a gun that cannot physically be set to auto is...challenging.

 

I've been looking at reviews of the gearbox etc and do quite like the features it includes. I wonder if it'll be one of those pews that I don't mess with for a while 😂

Link to comment
Share on other sites

Posted (edited)

I went ahead and fitted a Perun in my SR30 because I wanted to fit a warhead motor in there and the G&G ETU won’t let you switch off the AB , I’ve put perhaps 4-5k over 4 game mornings through and it’s been flawless , everything else is stock and I use G&G G2 mags in it , the Perun addition also retains the mag stop feature . Bit fiddly to program but got their after a few tries. I use 11.1 / 1100mah and it all still fits in the buffer tube .
 

Perun is so simple I did it all on my own 😂
 

 

all my other AEGS have either Asters or Titans in which whilst great are a bit more involved in the fitting , you may lose some features and sometimes don’t go in as smoothly as you’d like ( or so I’ve witnessed from my gun minion 😛 )

Edited by JimFromHorsham
Link to comment
Share on other sites

  • Supporters
16 hours ago, JinxDuh said:

 

I've been looking at reviews of the gearbox etc and do quite like the features it includes. I wonder if it'll be one of those pews that I don't mess with for a while 😂

 

I fuck with everything. But my G&G SR25 gearbox is bog standard, unopened. 

Link to comment
Share on other sites

9 minutes ago, Lozart said:

 

I fuck with everything. But my G&G SR25 gearbox is bog standard, unopened. 


Great, now I’m even more excited to get the SR15 🙄😂

Link to comment
Share on other sites

  • Supporters
13 minutes ago, JinxDuh said:


Great, now I’m even more excited to get the SR15 🙄😂

 

When I say "I fuck with everything", on the SR25 I changed;

  • stock
  • grip
  • spring
  • hop rubber & nub
  • Outer barrel
  • gas block and gas tube
  • flash hider
  • upgraded the MOSFET (the remote part in the stock tube) to the Perun ETU++
  • added a suppressor

The gearbox internals, the stock tube and the receiver are still as they came...

Link to comment
Share on other sites

  • Supporters

How it started:

image.thumb.jpeg.b93d03aaf6046f420e1bbfb70101c24a.jpeg

 

How it's going:

image.thumb.jpeg.88eee05f1e8c06cedfce8b480ab2b5e1.jpeg

Final form (for now):

 

image.thumb.jpeg.5130318bad5297e9475c2551bc247e41.jpeg

 

(added the Ergo grip, suppressor and bipod)

Link to comment
Share on other sites

4 hours ago, Lozart said:

How it started:

image.thumb.jpeg.b93d03aaf6046f420e1bbfb70101c24a.jpeg

 

How it's going:

image.thumb.jpeg.88eee05f1e8c06cedfce8b480ab2b5e1.jpeg

Final form (for now):

 

image.thumb.jpeg.5130318bad5297e9475c2551bc247e41.jpeg

 

(added the Ergo grip, suppressor and bipod)


Oooo she purty!!! I’m going down the KS-1 rabbit hole personally 🤣

Link to comment
Share on other sites

17 minutes ago, Jez_Armstrong said:

Then you might like my G&G SR15 

Untitled.png

 

You're the fecker that got me wanting one! I saw your post a while back on here,  then fell in love with the rifle haha!

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...