Les Posted September 18, 2021 Share Posted September 18, 2021 Hi all, New issue with my AEG, it's a specna M4, with standard V2 gearbox. When the selector/safety is set to semi auto / single shot, gently pulling the trigger results in full auto firing. If you pull the trigger quickly back all the way, then you get a single shot. All a bit strange, but really annoying! Being smooth results in a burst of fire!! Any help appreciated! Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted September 18, 2021 Supporters Share Posted September 18, 2021 Hmm, theres a few things it could be but it kinda sounds like the alignment between the cutoff lever and the trigger isn't quite right. Its one of those problems you can run into if your scratch building a box from random bits but not normally for a stock build. How old is the gun? Link to comment Share on other sites More sharing options...
johnnyj Posted September 18, 2021 Share Posted September 18, 2021 Another reason is the contacts are too close together . Rogerborg 1 Link to comment Share on other sites More sharing options...
Supporters Adolf Hamster Posted September 18, 2021 Supporters Share Posted September 18, 2021 3 minutes ago, johnnyj said: Another reason is the contacts are too close together . *flashbacks of trying to get them adjusted on the f2000 to cure precisely this problem* Link to comment Share on other sites More sharing options...
Les Posted September 19, 2021 Author Share Posted September 19, 2021 Thanks guys, It's about a year old, not too much use. Ok so, I guess a course if action might be to open up the gearbox, check and rebuild it. Then for the contacts, are we talking about the trigger contact points? I could try and 'adjust' them fractionally further apart? Link to comment Share on other sites More sharing options...
dazzer306 Posted October 3, 2021 Share Posted October 3, 2021 What battery are you using, a 11v by any chance ?? Had a similar thing with my ICS Sig used an 11v in semi would fire semi, then burst/full auto, changed battery to a 7v no problems, try that if your using higher Volt battery Link to comment Share on other sites More sharing options...
maggo87 Posted April 27 Share Posted April 27 Did you ever rectify this? I'm having the same issue with my sons g&g! Link to comment Share on other sites More sharing options...
Supporters Rogerborg Posted April 29 Supporters Share Posted April 29 Ahoy and welcome. As above, it's either the cut-off switch not cutting off, or the trigger contacts being too close. In either case, it's a case of taking the gearbox apart to find out. This is quite time consuming and intimidating the first time you do it, but there's nothing particularly hard about it, and there are loads of decent disassembly videos on YouTube that can help. Link to comment Share on other sites More sharing options...
Sewdhull Posted April 29 Share Posted April 29 If this is happening after the gun has been working fine then it's cut off lever wear most likely, maybe trigger trolley. The contacts don't have a way to close up over time, only open wider. If it were me, I'd get a new cut off lever and set of contacts ( they cheap). With the gearbox together still you can see the operation of the lever and trigger trolley and see how the cut off lever behaves, but it is this lever tipping the trigger trolley that gives you semi when the sector gear flips the trolley up. If the contacts look good, just replace the trolley and leave the contacts alone. Rogerborg 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now