Jump to content

AEG firing on full auto when selector set to semi..


Les
 Share

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Recommended Posts

Hi all,

 

New issue with my AEG, it's a specna M4, with standard V2 gearbox.

 

When the selector/safety is set to semi auto / single shot, gently pulling the trigger results in full auto firing. If you pull the trigger quickly back all the way, then you get a single shot. All a bit strange, but really annoying! Being smooth results in a burst of fire!!

Any help appreciated!

 

Link to comment
Share on other sites

  • Supporters

Hmm, theres a few things it could be but it kinda sounds like the alignment between the cutoff lever and the trigger isn't quite right.

 

Its one of those problems you can run into if your scratch building a box from random bits but not normally for a stock build.

 

How old is the gun?

Link to comment
Share on other sites

Thanks guys, 

It's about a year old, not too much use.

Ok so, I guess a course if action might be to open up the gearbox, check and rebuild it.   Then for the contacts, are we talking about the trigger contact points? 

I could try and 'adjust' them fractionally further apart?

 

Link to comment
Share on other sites

  • 2 weeks later...

What battery are you using, a 11v by any chance ?? Had a similar thing with my ICS Sig used an 11v in semi would fire semi, then burst/full auto, changed battery to a 7v no problems, try that if your using higher Volt battery 

Link to comment
Share on other sites

  • 2 years later...
  • Supporters

Ahoy and welcome.  As above, it's either the cut-off switch not cutting off, or the trigger contacts being too close.  In either case, it's a case of taking the gearbox apart to find out.  This is quite  time consuming and intimidating the first time you do it, but there's nothing particularly hard about it, and there are loads of decent disassembly videos on YouTube that can help.

Link to comment
Share on other sites

If this is happening after the gun has been working fine then it's cut off lever wear most likely, maybe trigger trolley. The contacts don't have a way to close up over time, only open wider. 

 

If it were me, I'd get a new cut off lever and set of contacts ( they cheap). With the gearbox together still you can see the operation of the lever and trigger trolley and see how the cut off lever behaves, but it is this lever tipping the trigger trolley that gives you semi when the sector gear flips the trolley up.

 

If the contacts look good, just replace the trolley and leave the contacts alone.

Link to comment
Share on other sites

This thread is over three months old. Please be sure that your post is appropriate as it will revive this otherwise old (and possibly forgotten) topic.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...