Ares Amoeba Striker AS-01/AS-02 Owners Thread

[Solly4568]

Creating this thread to help people with their Ares Amoeba Striker problems and to discuss ways they have upgraded and changed their guns

Have fun 😀  

[ProPain87]

As01

 

ML 310mm Crazy Jet barrel

AA Hop up unit

ML decepticon 50 + omega nub

Ares short fluted barrel

bespoke M150 spring

Hawke Panorama 4-12x40 IR Scope

AA hop wheel

450fps on .20, 320fps on .04s (1.9J)

 

Shoots far and fairly accurate but I’m not 100% happy with the accuracy so if anyone has any bucking recommendations for me to try. I’ve tried a auto bot 60 and it was shocking with that, much better with the decepticon 50 

 

Got a bespoke cylinder kit and body pin waiting to go in and a Gap trigger sear on its way from Canada 

 

[Solly4568]

I know it sounds like a broken record but I would get a maple leaf bucking I have found that they are just the best for almost anything you are building and yeah I am not a fan of the decepticon either. but just for prosperity what range are you getting with the decepticon 

[ProPain87]

Both buckings I have are maple leaf (ML) Honestly I have no idea on exact numbers, I don’t have anywhere to test further than my garden (20m) and wouldn’t really like to just guess. I’ve only skirmished it once with this bucking but I got a fair few kills and really enjoyed using it where as with the ml autobot I couldn’t hit a barn door further than 20m away (bbs we’re flying flat for a lot further just hooking left and right) and I got so annoyed with it I put the striker away. Once my new cylinder set goes in I’m going to try it again and try some different weight bbs and see what works the best

[Solly4568]

sounds almost like your hop up bucking is not properly seated I would take it apart, reinstall the Autobot just to see if it is a seating issue  

[Solly4568]

http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_Other_ARES_Compact_Power_Spring_Bolt_for_ARES_Amoeba_STRIKER_S1_Sniper_Rifle_Upgraded_Version.htm

guys do you reckon that this is legit, they are selling the upgraded bolt for less than half price 

[E21A]

7 minutes ago, Solly4568 said:

http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_Other_ARES_Compact_Power_Spring_Bolt_for_ARES_Amoeba_STRIKER_S1_Sniper_Rifle_Upgraded_Version.htm

guys do you reckon that this is legit, they are selling the upgraded bolt for less than half price 

 

Its not really half price by the time you add import duty etc it’ll work out the same as buying from airsoftpro

[Solly4568]

yeah but the one from airsoft pro ( that I could find) did not have the stainless steel bolt and only had the bolt internals 

[E21A]

Ta dah! 

 

https://airsoftpro.cz/en/gun-parts-upgrade/sniper-rifles-parts/for-ares-amoeba-striker/kompletni-upgrade-set-c.p.s.b.-pro-ares-amoeba-striker-490-fps-145-ms-detail

 

Be warned, the piston doesn’t work with 90° sears 

[Solly4568]

not bad google Jedi😀 but if you take shipping into effect then it comes in cheaper to get the one from Redwolf   

[E21A]

It’s £105 from airsoft pro shipped, I know as I bought one a few days ago. 

 

Something at $85 on redwolf shipped to the U.K. will work out after import duty and shipping at the same money, again, I know cos I’ve done it. 

[Solly4568]

6 hours ago, E21A said:

Something at $85 on redwolf shipped to the U.K. will work out after import duty and shipping at the same money, again, I know cos I’ve done it. 

O crap just realised I was looking at the American sight and that the English version (which I thought was 20 min away from me) doesn't carry the bolt 😭

[E21A]

16 minutes ago, Solly4568 said:

O crap just realised I was looking at the American sight and that the English version (which I thought was 20 min away from me) doesn't carry the bolt 😭

 

Theres loads of stuff the English site doesn’t stock 🙄

 

The .com site is the Hong Kong?? shop

[ProPain87]

Just seen Lycan have made a new 90 sear for the as01 on eBay. Wish I’d known before I ordered my gap sear 😂

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F173744345304

[ProPain87]

My gap sear arrived, can get the rest of the new parts in now and see how it is 😁

[Solly4568]

does anybody know if the shortened striker mags fit in m4 pouches 

[E21A]

52 minutes ago, Solly4568 said:

does anybody know if the shortened striker mags fit in m4 pouches 

 

Yes the do, just about 

[Skara]

Don't fit in mine.

I have a mix of condor, Helikon and WAS pouches

[Solly4568]

look what just came 😮

[E21A]

Nice, I’ve just fitted the same but with the airsoftpro internals kit, 90° Sear no likey 45° piston! 

[Skara]

Parts arrived today, here's what she looks like

 

Will swap the suppressor out for something that actually works, wrap the inner barrel in foam to stop it from vibrating and probably fill the stock with foam as well.

 

Can't wait to test it out this Sunday

[jay1988]

Hi guys 

 

Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? 

 

 

[Solly4568]

10 minutes ago, jay1988 said:

Hi guys 

 

Just got my self a Ares striker as01 IV upgraded the sear to a lycan Romeo dear I plan on getting the upgraded stainless bolt and AA hopup is there any other things I should look at upgrading ? 

While you have the gun apart, I recommend putting a tight bore inner barrel along with a maple leaf hop up rubber and nub in just to make it easier on you, as this will improve accuracy and allow you to lift even heavier bb’s, although mine happily lifts .4 with the standard hop up

[jay1988]

Is there a specific inner barrel I should look for as I can seem to find a 550mm one 

[E21A]

Edgi dual bore if you’re staying at that length, helps resolve to poor cylinder to barrel ratio