Mikeey946 Posted January 4, 2018 Share Posted January 4, 2018 hiya all I have a GBB pistol I got second hand that has a problem im wondering if anyone could give me a bit of guidance I haven't had the to take it to a tech, problem is that it fires one or 2 shots then all of a sudden goes a bit mental firing on full auto but not firing any bbs then all of a sudden dumps all gas out the ejection port or barrel. Also had it jam a bbs halfway out the ejection port a few times iv uploaded a video to show you problem I got it second hand I believe its a WE was told try both the positions the safety can be in full open and half way but they both do exact same I also attached a picture of it see if it can be recognise maybe that will help thanks in advance 20180104_191518_45323091962793.mp4 Link to comment Share on other sites More sharing options...
Mikeey946 Posted January 4, 2018 Author Share Posted January 4, 2018 20180103_162320.mp4 Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted January 4, 2018 Mostly Retired Moderators Share Posted January 4, 2018 @Marc.RG1 and @rocketdogbert are our resident GBB Pistol experts. Marc managed to fix an unruly XDM I had with a full auto problem really easily. And John has probably taken apart and built more pistols than your or I have probably ever owned Link to comment Share on other sites More sharing options...
Guest Posted January 4, 2018 Share Posted January 4, 2018 Neither vid works for me. The last two pistols I had dumping gas was because the trigger bar was not returning properly, causing the hammer to keep the mag valve open. I only fixed it by putting new, standard trigger bars in. One didn’t look damaged at all, the other was a brand new Guarder heat treated one, both were sticking, but only very slightly. Also, I had a WE17 that I bought damaged that only fired on auto, but that was an easy fix, the head of the knocker lock pin had been broken off by the previous owner. Strip it, clean it, inspect any parts for wear, re-assemble and oil it. Link to comment Share on other sites More sharing options...
Mostly Retired Moderators L3wisD Posted January 4, 2018 Mostly Retired Moderators Share Posted January 4, 2018 This is a good video Marc did on the XDM. Not sure how well it'll translate to your M9, but might help Link to comment Share on other sites More sharing options...
Mikeey946 Posted January 5, 2018 Author Share Posted January 5, 2018 cheers buddy thanks a lot much appreciated have you any clue where I could get the trigger thing from might be worth a shot trying a new one ? Link to comment Share on other sites More sharing options...
Guest Posted January 5, 2018 Share Posted January 5, 2018 46 minutes ago, Mikeey946 said: cheers buddy thanks a lot much appreciated have you any clue where I could get the trigger thing from might be worth a shot trying a new one ? I’d disassemble it first and try @Marc.RG1 fix, it’s free lol. I get all my WE parts from MPA in Hockley as they are local. Link to comment Share on other sites More sharing options...
Mikeey946 Posted January 5, 2018 Author Share Posted January 5, 2018 tried another trigger bar I have another m92 its brand new arrived Wednesday so I know that ones good and it still did the same so its not that I also tried 3 other magazines including the brand new one and heated the gas up a little and the magazine once full still the same so that rules all those out ill have a look at the video and see what I can work out from it with my m92 cheers bud Link to comment Share on other sites More sharing options...
Aengus Posted January 5, 2018 Share Posted January 5, 2018 1 hour ago, Mikeey946 said: tried another trigger bar I have another m92 its brand new arrived Wednesday so I know that ones good and it still did the same so its not that I also tried 3 other magazines including the brand new one and heated the gas up a little and the magazine once full still the same so that rules all those out ill have a look at the video and see what I can work out from it with my m92 cheers bud Full auto in gbb pistols is usually to do with the trigger mechanism. Maybe something isn't catching the sear or you have a broken spring in there? Edit: Upon further googling it seems like a problem with your sear or trigger bar and I've seen mentions of the trigger return spring. I've never had one so I can't be much more help than google. Link to comment Share on other sites More sharing options...
Chris_B Posted January 5, 2018 Share Posted January 5, 2018 Hiya, is it a full auto firing pistol? And is it a Gen 1 (single hammer & trigger frame) Or Gen 2 ( separate hammer & trigger frames) Mine was firing in full auto on semi and it was part #038 that had broken. Also, the hammer sear wears out too causing the hammer not to lock when recoiled. (Part #52) Hope this helps Link to comment Share on other sites More sharing options...
Mikeey946 Posted January 5, 2018 Author Share Posted January 5, 2018 Trigger return spring was replaced today had the sear out looked brand new, didnt try a new one but it was in immaculate condition tried a new trigger bar that didnt cure it either i fully stripped it today made sure it was all okay replaced all springs and its still doing same only part i didnt strip was top slide. Its the gen 1 all one single piece Part 38 i cant see mine has can you forward a link to a real picture of it so i can see what it looks like Link to comment Share on other sites More sharing options...
Chris_B Posted January 6, 2018 Share Posted January 6, 2018 Hi Mikey, Have a look on kyairsoft under pistol parts and select your Gen 1 variant. The most common parts for the issues you have are described by ourselves in the above comments. But honestly you need to take it apart in order to inspect the components. When I got my broken WE M9A1, it was doing the same symptoms as you described, but I have the Gen 2 variant. The parts I replaced was a broken hammer frame (sheared in two) a broken valve knocker (the little post broke off), a worn hammer sear and weak sear spring. Got the parts from kyairsoft, took a week or so. I've yet to replace the hammer spring as it's too weak to knock the valve properly on a certain mag. These are the most common failure prone items in the WE M9's (apart from the fire selector bar #038) So in order to figure out what parts are worn or broken, you're gonna have to dismantle it. The top slide is a bit tricky to take apart and you'll need to be careful when doing so, as parts like the selector has a retention spring and plunger that goes flying if you don't keep your finger over it when you pull the selector rod out. The hammer & trigger frames are easy peasy to dismantle, just got to watch out for the spring(s) orientation and make sure they don't ping out either. Hope this helps. Link to comment Share on other sites More sharing options...
Mikeey946 Posted January 9, 2018 Author Share Posted January 9, 2018 I gave up in the end took it to be repaired ill post outcome when i get it back thanks all for help Link to comment Share on other sites More sharing options...
Lbotton Posted April 4, 2018 Share Posted April 4, 2018 Hi guys! I’m having problems with a we m9 gbb. The fire mode selector bar already broke 2 times (#038). I will bought spare parts but I’m afraid if another part can be causing the problem. Do you guys have any advise on this? Any workaround to make this part more stable? thanks, lbotton. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.