Supporters sp00n Posted October 7, 2015 Supporters Posted October 7, 2015 <will add more later> for a start, i'll just leave (tease) this here (just got this, straight from P*)) getting a grip, but keeping it retro Update 06/10/15 out with the old In with the PEW PEW PEW!! (unfortunately this was as far as i could get today as my amped IGL hasnt arrived, and my FCU cable was missing, both should arrive tomorrow though) some new batteries to boot update 10/10/15 Amped IGL and the FCU cable ooooh crap (fcu cable too short) (drum roll please) Here she is fully assembled (will get better pics during day light) To Do pew pew, so she needs setting up, i need a longer FCU cable (when funds allow), i have to sort a screw on the bipod try other barrel/hop rubber combo's, i have a ZCI barrel, Orga barrel, loads of hop rubbers etc etc Aengus 1
Randymanpipe Posted October 7, 2015 Posted October 7, 2015 Wtf is it? One of those medicines you pump up your nose when you have sinus problems?
cyrexx Posted October 7, 2015 Posted October 7, 2015 ....Or maybe it goes in the other end.... Randymanpipe 1
Hef Legend Posted October 7, 2015 Posted October 7, 2015 This is for a SR25, but using the Jack P* make custom nozzles don't they, I've been chatting to them myself. sp00n 1
Supporters sp00n Posted October 7, 2015 Author Supporters Posted October 7, 2015 such pun (pic added to OP)
Supporters sp00n Posted October 7, 2015 Author Supporters Posted October 7, 2015 This is for a SR25, but using the Jack P* make custom nozzles don't they, I've been chatting to them myself.
Supporters sp00n Posted October 10, 2015 Author Supporters Posted October 10, 2015 updated main post, and finished .... sort off
Hef Legend Posted October 10, 2015 Posted October 10, 2015 updated main post, and finished .... sort off Hey Fella, Message P* on facebook, I was speaking to them about the short cables and they've sent me 2 long ones out for free Say that I sent you, I did say to them some others people I knew had Jacks (you/Qlimax) and would likely need cables.
Supporters sp00n Posted October 10, 2015 Author Supporters Posted October 10, 2015 Yeah I have been chatting to p* for abit (that's how i got a jack patch , and I found out about the sr25 nozzle) I'll drop them a message see what happens
Supporters sp00n Posted October 10, 2015 Author Supporters Posted October 10, 2015 I should also add that since my gun is physically locked to only safe or semi, I would not need to adjust any settings (such as rof or any of the full auto functions etc), once setup
Sacarathe Posted October 10, 2015 Posted October 10, 2015 Can you set different airvolumes for each firemode? To compare whether there is any difference?
Supporters sp00n Posted October 11, 2015 Author Supporters Posted October 11, 2015 Can you set different airvolumes for each firemode? To compare whether there is any difference? With the current version of fcu, I don't believe it's an option. Future versions maybe
Supporters sp00n Posted October 14, 2015 Author Supporters Posted October 14, 2015 Hey Fella, Message P* on facebook, I was speaking to them about the short cables and they've sent me 2 long ones out for free Say that I sent you, I did say to them some others people I knew had Jacks (you/Qlimax) and would likely need cables. Spoke to them, even sent them a pic or 3, but no free fcu cables for me they linked me to amped airsoft who has them for sale etc Also am looking at stock options, as I want something different, but I have not seen any thing that I like ATM
Supporters sp00n Posted October 18, 2015 Author Supporters Posted October 18, 2015 quick update, got all excited today, first skirmish with my jack'ed sr25 at the chrono just dialing my fps in with some 0.4g rockets .... when suddenly it stops feeding, eject mag, replace mag 5-6 shots ... stops feeding etc etc *sh1te* <stomps off> puts it away and get my mancrafted VSR out. had a good day sniping (actually felt sorry, as it was abit like shooting fish in a barrel at some points) any way at the end of the day i decided to have a play around with my SR, after lots of stripping and reassembly i could find no faults ... out of despiration i tried and old hi-cap i had for it ....... and suddenly i have working gun now i just have to work out why the 120rd mid caps are jamming (sorry no pics, was a little peeved etc)
Supporters sp00n Posted October 25, 2015 Author Supporters Posted October 25, 2015 So I have been playing with the 120rd mags, and I have now come to the conclusion that they won't feed any 0.4bb's (tried rockets, blaster devils, and monkey balls) 0.3's and 0.36's fed fine Yet all 0.4's feed perfectly in a hi-cap mag. In sheer desperation I tried the original 50rd short mag the gun came with and all the 0.4's fed!!!! This sparked my interest and lead to a minor discovery, the 120rd mags are double stack type, where as the 50rd mag is single stack! So it now looks like rather then the 4 or 5 120rd mags I was planning, I am going to need a lot of the 50rd'ers lol
Ewan_Vs_Pigeon Posted October 26, 2015 Posted October 26, 2015 Nice build! Except the pistol grip....
ricefarmer Posted November 1, 2015 Posted November 1, 2015 Hey I'm trying to build a Jack Dmr but on the 5.56 platform, what's your barrel setup and dwell settings?
Sacarathe Posted November 1, 2015 Posted November 1, 2015 Have you contacted Rodd over at polarstar, they are incredibly thorough and helpful.
Supporters sp00n Posted November 1, 2015 Author Supporters Posted November 1, 2015 ATM all stock settings, gunna be trying different barrels and hop rubbers now
ricefarmer Posted November 1, 2015 Posted November 1, 2015 Nah I've mostly been talking to the guys at amped, I also have a thing against Delaware jks, but seriously I never considered it. Thought you only contacted them for custom work
Sacarathe Posted November 1, 2015 Posted November 1, 2015 Rodd sent me a 1400 word email in july, they're bloody thorough - and that's to a prospective customer. I wanted to get a polarstar SCAR, in the end I didnt get a polarstar at all, the SCARs that fit good Hop ups and polarstars were far too expensive - I didn't fancy buying a £400+ gun - which would have good internals only to rip them out.
ricefarmer Posted November 1, 2015 Posted November 1, 2015 Ha wow, you don't get that kind of service from any of the major retailers like evike, airsoftgi or even zeroone. I mean the guys at Amped were pretty thorough but I guess you would need to be extremely thorough as the manufacturer. To be honest I only frequented the American forums but they're all out of date and offer no info on the Jack. But with your problem, are there any sites that just sell bodies?
TacMaster Posted November 1, 2015 Posted November 1, 2015 But with your problem, are there any sites that just sell bodies? You can get receiver shells and gearbox cases on most sites. Tbh you could build your own completely custom gun with all the bits available, especially if it's an M4
ricefarmer Posted November 1, 2015 Posted November 1, 2015 Yeah but only for M4s and AKs, eg I fancy a KAC PDW but no website I can find sells complete bodies. Like if you buy a Madbull receiver you still need a fire selector and tidbits.
Recommended Posts