Snakeeyes75 Posted May 25, 2015 Author Posted May 25, 2015 Hey, I feel building a polarstar DMR would be a bit of a waste of money, but I am all for a HPA setup. There is a polish site called mancraft offering a semi auto HPA system for about £160. From what I have seen this is as consitant as a polarstar (amped airsoft video on youtube I think), just with the right regulator and is dead silent too. If you are looking for a DMR base then I would definatly recommend the A&K SR25 - a great body to build from. A tip would be to look at some polish sites to find it as last time I saw you could get it for £160. Combined with a scope, and harris type bipod you have the externals done. Another plus is the rails as they allow you to lock down the outer barrel. It is the gun used in this thread: http://www.airsoftsniperforum.com/43-longrange-aegs/892-holy-grail-building-your-dmr-aeg.html Once you have got the A&K SR25 and installed the mancraft engine, you only have the hop system left to go. Firstly, you don't need to spend a fortune for a great hop unit, I would recomend the lonex. Seondly the bucking, again I would go for the lonex 70d bucking as in my opinion it does the job better than any other bucking. Now this is were it gets complicated, you could go full out with ER hop's, LBR mod and PDI barrels, but in the most part these are for those who are trying to squeeze every liitle bit of peformance out of there DMR and are very difficult to install, however the peformance is phenominal (e.g. headshots at 300ft +). You proberbly don't want to go down this road. What I would reccomend is a Promithius 6.20 inner barrel, it uses an extend flat hop hop system and an wide bore, it is also relitivly cost effective (don't use the bucking it comes with, just flat hop the lonex). A HSA barrel stabilising kit, very easy to install drop in upgrade and EM nub for the flat hop. This would result in great peformance, with only very easy modifications needed and the build is quite cheap, this is an estimated build total: Mancraft HPA system £160 A&K SR25 £150 Lonex chamber and bucking £20 Promithius 6.20 barrel £35 HSA EM nub and BSK £20 Nuprol 0.43g BB's - watch out you will get insane joule creep. Total: £400 - The price of a polarstar engine. Of course you need a reg and tank - for this I recomend a ninja SPL tank and a ninja regulator (import these from america) Also if you wanted to go down the route which involves heavy modding, contact me as I can do all of it. Hope this helps, Charlie. Thanks for the lengthy reply TBH this is all new territory for me. I don't want to say i'm made of money but I'm happy to spend whatever it takes to build not only a top performing gun but a reliable one too! The only people I've spoken too about this off the forum have P* settups and ALL love them to bits! however if there's an alternative that is better (Even if it cost more) I'll happily investigate it! Likewise if it costs less then again I won't pass it over One thing I will say is I have no care in the world what the thing looks like! From spending the last 5+ months with my VSR I think i'd like to go down the low weight (I never use a bipod) route. If you haven't seen the video I have linked to then here's the gun that I sort of have a "Gun crush" on lol
Sacarathe Posted May 25, 2015 Posted May 25, 2015 Don't forget https://www.google.co.uk/search?q=redline+airstock if you're going lightweight. (its far too expensive for what it appears to be). Charlie_ 1
Charlie_ Posted May 25, 2015 Posted May 25, 2015 Ok thats fine, if you want to go all out here is what you want to buy: Orga Magnus 6.23 inner barrel HSA ER HOP + EM NUB (get a good tech to install these) (Use 0.36-43g BB's) Promithius perfect hop chamber Promithius hard bucking Speed trigger HSA barrel stabilising kit Polarstar red nossle Redline airsoft poppet shim set. This guy knows what he is doing, have a look at his build: Snakeeyes75 1
Charlie_ Posted May 25, 2015 Posted May 25, 2015 Don't forget https://www.google.co.uk/search?q=redline+airstock if you're going lightweight. (its far too expensive for what it appears to be). Yeah, I have made some plans to build a custom one of these at a fraction of a the price. Sacarathe and Snakeeyes75 2
Sacarathe Posted May 25, 2015 Posted May 25, 2015 Yeah, I have made some plans to build a custom one of these at a fraction of a the price. Don't forget the regulator when you do.
Snakeeyes75 Posted November 20, 2015 Author Posted November 20, 2015 Right, Time to necro this topic, My P* project has begun, I have a new P* Jack installed into a G&P shell with a Flat blade Speed triger. Amped IGL out of the grip (At the moment). VOLTR/Magpul Receiver, Magpul Grip and Stock (Will be replaced) a Madbull 14.5" outer barrel, Spikes Tactical 12" rail, Prowin hop.... So far! My next part will be the inner barrel/hop rubber. I'm thinking 6.23 Orga Magnus or a 4.07 Miracle barrel? Which would be the best option? BTW, I'm looking at flat hopping the nub so probably a Prommy setup?
Snakeeyes75 Posted December 6, 2015 Author Posted December 6, 2015 Well, as it's nearly Christmas I decided to throw some more money at this project. TBH for the moment it's finished! Current Settup: Magpul VLTOR receiver, Magpul Grip and Stock, Spikes 12" Tactical Rail, Madbull DD 14.5" Outer barrel and OSS Supressor, P* Jack with Amped IGL, Blade SPEED trigger in a G&P Gearbox. Orga Magnus 6.23 445mm Barrel, Prommy Purple Rubber flat hopped with a Namazu nub in a Prowin Hop chamber. So far i've only set the thing up for use with .3's. I need to test properly before I start mentioning range and accuracy . Monty, Albiscuit and cyrexx 3
Bullet Posted December 7, 2015 Posted December 7, 2015 You should think about an mk23 with a gspec barrel passed through the suppressor (uping the fps nicely). You can get a stock conversion kit which looks cool and you will have he quietest hit making machine around. Edit: sorry saw your post. Looks epic! Snakeeyes75 1
Snakeeyes75 Posted December 7, 2015 Author Posted December 7, 2015 You should think about an mk23 with a gspec barrel passed through the suppressor (uping the fps nicely). You can get a stock conversion kit which looks cool and you will have he quietest hit making machine around. Edit: sorry saw your post. Looks epic! Already done that
Bullet Posted December 7, 2015 Posted December 7, 2015 Very nice. How did it turn out? I have an stti version to do the same with.
Root Admin proffrink Posted December 8, 2015 Root Admin Posted December 8, 2015 Isn't the trigger a bit of an issue on those NBBs though? Spongy I mean.
Bullet Posted December 8, 2015 Posted December 8, 2015 The tm is supposed to be better than the one I have but I havent used the tm. Mine feels ok, certainly not an issue to use.
Snakeeyes75 Posted December 8, 2015 Author Posted December 8, 2015 I've just put the Gspec barrel in the MK23, mines a TM. The trigger pull is longer that a GBB but the range is crazy! I used .3's in it stock but I know if you do the biro mod it'll lift heavier too.
Snakeeyes75 Posted December 8, 2015 Author Posted December 8, 2015 Am tempted by a Mk23 "sniper" With just the barrel swapped it's chronoing at 410 fps! Crazy
Recommended Posts