Thorpe0809 Posted February 10, 2014 Share Posted February 10, 2014 Hey guys. Theres probably advice already on here but for the life of me I cannot find it :/ fail. I recently bought a Dragon Hi Capa 7.0 but annoyingly the FPS rate is considerably too high to use at my regular airsoft sight, I was wondering if there was anyone who had any information in regard to being able to lower the FPS rate so i'm actually able to use it? Thanks guys Link to comment Share on other sites More sharing options...
springs Posted February 10, 2014 Share Posted February 10, 2014 can you remember what the chrono said? I believe these run at about 350fps? Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted February 19, 2014 Root Admin Share Posted February 19, 2014 The only effective thing one can do to lower the FPS without switching valves is to use different gas. Switch down to regular Abbey or the slightly lower Zero One gas and that should do the trick. That said, out of the box a Marui Hi-Capa will only be shooting ~320fps because of the stringent laws in Japan about airsoft guns and use of duster gas; as springs said, did you check the FPS at the site? Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted February 19, 2014 Supporters Share Posted February 19, 2014 he's clearly not using a marui hicapa though, if he were he wouldn't be worrying about FPS. Link to comment Share on other sites More sharing options...
CaptainDumbass Posted February 21, 2014 Share Posted February 21, 2014 marui dont make a hicapa "dragon" either (not that im aware of anyway) Your best bet is to use weaker gas like proffrink said and maybe heavier bb's. Link to comment Share on other sites More sharing options...
Supporters jcheeseright Posted February 21, 2014 Supporters Share Posted February 21, 2014 no, heavier BBs will make the problem worse, weaker gas or modifying the blowback unit are really the only two options. Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted February 22, 2014 Root Admin Share Posted February 22, 2014 he's clearly not using a marui hicapa though, if he were he wouldn't be worrying about FPS. Ignore my mistype. I went on autopilot somewhat and typed 'Marui' - shows what a pathetic fanboy I am when it comes to GBB pistols. I did read the OP however, and I meant it just as a general for all ordinary GBB pistols despite rambling on a bit in the second sentence about Japan. Also, hello again person I just bought that CB waterbottle pouch off. Link to comment Share on other sites More sharing options...
two_zero Posted February 23, 2014 Share Posted February 23, 2014 marui dont make a hicapa "dragon" either (not that im aware of anyway) Your best bet is to use weaker gas like proffrink said and maybe heavier bb's. heavier BBs to lower the FPS will straight away get him a permanent ban from the site he's playing at. Link to comment Share on other sites More sharing options...
Root Admin proffrink Posted February 24, 2014 Root Admin Share Posted February 24, 2014 Most sites will crono you on BBs they know to be .2s anyway so yeh. Link to comment Share on other sites More sharing options...
.gif.c9becc9e80e8b91706ea684ec6e23c92.gif)
Recommended Posts
Archived
This topic is now archived and is closed to further replies.