Davegolf

I don't know exactly but it's quite a weight saving, ditching the front sight post (which I know you love), the heavy RAS setup etc. You can also run a Sopmod / Vltor style stock and lead ballast the rear, you can get a much more neutral balance that way.

Get a 7" free float rail on the MWS, that saves loads of weight, in the right place too! I think a Fortis weighs the same as a crisp packet lol!

Do you run a vertical grip? Makes a massive difference when playing for hours! Also do you were a Rig or tactical vest? Single points are way comfy if you attach them to the shoulder, as opposed to round your neck etc. Nicest slings are Vickers Tactical, HSGI or Magpul MS. Yes they are dear but they are wide, quality and secure

You saying about the weight, I was comparing the 417 and MWS, the latter is so pointy and fast in comparison!

Those MWS's been cornering you!?

You sold your Scar H

Or if your shooting high FPS cutting a length of the BIC ink tube works a treat, it's the correct OD, so cut the exact width of the hop aperture and it will also remain extremely true

So the ML relies totally on the two barrel flats to prevent rotation? The Modify bucking definitely looks very well molded! i don't know why but any Maple products have been toilet for me, maybe I get all the lemons!??

Interested in the unicorn bucking for sure!

Oh wow 😳 Could be amazing! Is it Cerakoted?

I'd add if you like realism and interaction the MWS is a joy to operate, love slapping the bolt release every mag change

The MWS mags hold 100rds+ worth of gas once modded. Having had an MP7 they are good on gas but have very small gas reservoir. I don't think there is a more efficient GBBR than the likes of the MWS & MP7 PS I'm selling an MWS haha shameless! The MWS IMO is a semi auto tool so not blasting through rounds like you would an MP7 Indoor most likely

You need The from sight to hold the forward rail ring. To achieve what you want you need a folding front sight post like Vltor's one or a free float rail system.

I don't understand what you are trying to achieve? Do you have a free float rail system to fit instead or are you just taking it apart to get to the hop unit? On the front hand guard remove the button head Allen screw near rail section T14, then the upper rail comes off. Then pull the delta ring back and the lower rail comes off. Then you can remove the front sight post with the gas tube still attached. The delta ring doesn't need the gas tube.

The metal rod (dummy gas tube) is pinned to the front sight and slot thru the delta ring and into the upper receiver. Watch some YouTube vids, its disassembly / reassembly is well covered

Ha punch that little pin out too just to the left of your red circle of doom I leave that pin out on mine as its really not necersary and just slows disassembly!

There is one small grub screw on the underside of the front sight unit, and there are 2 punch pins, you need to knock them out from the fire selector side / left side through to the mag release / right side. Take note of the pins orientation so you put them back the same way around and in the same hole.

Yeh I count out my rounds, that way you know where you are and sometimes you change mag prior to an assault or likewise. @sonofsammo make sure to lube all seals and gaskets when assembling so that everything can seat in. Got me another MWS mmmmmmm To anyone on the fence, get one! You only live once hah!

They are great pieces of kit, i think it will be a long time untill something better is produced. I dont want to, or mean to start any off topic convo on Wo1f's nice thread but i would love TM to make a HPA variant of these, properly, not tapped mags.

Now I don't own and have not stripped a Krytac Vector but looking at the quoted FPS and the short barrel I would hazard a guess at it being an M100, 110 at a push. Regardless the FPS is close enough that if it was mine I would trim the spring rather than swap it out. Being short barrelled I'd bet that a spring trim will have a greater reduction in FPS than a longer / normal barrelled gun. Interested to hear if someone know the actual spring rate for sure

Yes for an AEG a spring change is the energy source and most common method, especially if you need to drop a decent amount of FPS e.g. 30. For a drop of 5-15 you can trim the spring, e.g. cut off a coil Heavier BB weight will show a lower FPS reading but is a false reading, the energy is still the same so no you cannot. As a general rule 99.99% of places chrono on 0.20s even if for example you played using 0.25s

Seriously if you are playing CQB or even mild field set your FPS at 1j / 328 max, those extra 10-20 FPS doesn't make jack difference to range or accuracy, all your doing is limiting the amount of sites you can play at and hurt people even on 0.2s

Currently doin tax return and 'Paul Oakenfold' 'Dreadrock' has come up on my random play, Yes the Matrix tune!

Looks like you've got a bit of a problem there, some kind of drum addiction. In game you can imagine the opposition thinking 'he'll change mag soon then il get him'. So with the KWA, aside from 1:1 realism and heavy recoil is it the best performer range and accuracy wise? Out of the AEGs which is the best performer?

I've played with a Krytac, not all that impressed TBH, been keen on getting a KWA for a loooooong time, interested to hear why the KWA was your fave rocketdogbert?