Egon_247

Oh dear God.😱 Some of those are absolutely gorgeous 😍😍😍😍😍

Yup. Working a treat. Desoldered the battery cables and motor cables as I was using new stuff. Deans to the mosfet +-, MOSFET to the motor +- and the two wires for the firesignal soldered to the tabs on the screw on bit by the motor screws. Semi and full auto work perfectly. £15 MOSFET happiness. Cheers for the guidance guys, much appreciated.👍👍👍❤️❤️❤️

If my head reads it right, like you say, the gnu is permanently in semi with an extra set of contacts for auto. So if either of the contacts sees a go signal it will (should 😂) fire. The only difference is the cut off lever on the semi will stop it re-cycling. Mine is a tm (mostly) so looks exactly like that. 👍

Yeah, i looked at those. £116 is worth more than the actual rif to be honest! The cutoff lever (seen at 16:00 as he's undoing it) is what stops the gearbox cycling on semi after one shot. Mine looks exactly like the shot at (11:36) and i'm thinking that the two wires from the hard wired mosfet would connect to the wire terminals that he then unscrews at (11:57) and the mosfet motor output goes straight to the motor. In fact, i think i've just answered my own question in my head by typing that out..... hey, as long as the smoke stays inside the wires, its all good....

Lol. 😂 Ok. So I've been looking at mosfets. I run lipos on everything I own that takes a battery so I'm thinking about going in the mosfet direction. Only my Aug.... It has a switch with two soldered wires. Is my logic right that something like a gate merf will be fine, one wire to each of the mosfet "fire" inputs from said switch and the semi cut off lever will do its thing? Or am I barking up the wrong tree?

You know, sometimes life if just odd. While clearing up all my stuff I found one of those AliExpress gas bottle hpa type things that I'd bought and could never get to work properly.... So I had a play and managed to get it working on my magazine! Lobbing 0.28's at 0.7 joules. Loool. 😂

Awesome news. Thank you. I'll order one and see....👍

Hello gas buddies. I bought a double bell M92 for my first side arm when i first started 'softing. Over time, its been left to the side as i've moved to a mk23 and all its joys. So i thought i'd resurrect the M92 as it kicks like a mule. However...the mag is gas tight. no leaks. But it fires about 10 shots then runs out of gas. I have a new fill valve and gas router on its way, just in case its not filling or its venting tween the mag and nozzle but i'd like to try a WE mag and see if it fits. I imagine, being TM clones, that they might....that way i could have more than one... Ive looked for spare mags but they're pretty much non existent unless you live in Malaysia or china...

Binned. Utter shite. Not having a good week. Lol. 😂😂

Yes. If it hops at all. Shoots left right up down

Nope. Ignore me. It's poo. 😂😂😂😂

I'll see if the manufacturer states a shore number. Hadn't thought about that to be honest. It's currently in my mk23/vsr Frankengun so it'll be a while before I get it up and running properly. Proof as you say, will be in the shooting.😂

I'm not getting any vibration per se, I just wondered if it would cause issues. I mean, I'm amazed my ex wife hadn't knocked all her fillings out with her stuff....🤪

Lol. I did think that. Three hands are better than two. 😂😂😂 The inner barrel ends at the end of the stock (G spec mb03) so I'm going to cut the rest off.

Oh. Oh dear. It would appear to have morphed into a ghetto mk23 thing. Work in progress....😂😂

Yeah, second that about the extension piece. The 904g is v short in the battery box area. Nice person on here printed me an add on piece. Much betterer. 😁 Oh and the suppressor went as it was curving my shots too 😱

Have you watched the history of Airsoft on YouTube? It's very good. Quite enlightening.

There's a thread in here that throws much love at the de m90x range. I have the 904g and I love it to death. The ONLY issue I've had is the MOSFET refused to play nice with my 11.1v but bunging a 7.4v in it made it electronically happy again.😁

Hello and welcome to the mad house. Occasionally you find sane one in here... 😂👍

Agreed. More drugs applied. 😂😁

Apologies for the random questions but I do tend to over think stuff...😁 Ok, so a standard AEG with standard motor. 18,000 rpm motor through the gears makes the sector gear do 1000 rpm. Not that you're holding it for a full 60 seconds but that's rapid, isn't it? Now, the bevel and spur gears are fine as they're concen concen con, round. They're balanced while spinning. The sector gear has big pointy lumps sticking out of it to do it's piston slinging magic. It has holes drilled in it too, I've noticed. I'm sure they balance up fine. But what about when you short stroke one? Two, three, four teeth missing on something that rattles around at 1000 rpm, even momentarily is surely going to cause some "ann summers" type of chaos in that little ally gearbox? Is there a way of balancing them? I've tried to do it by using a countersink on the opposing drillings and resting the shafts on a cut out slot, but is this a thing? Or am I overthinking it and need more ssri tablets? 😁😂

Oh yes indeedy. Bored engineers are dangerous. Yeah, i gave the air line a quick squirt of silicone then rubbed it off, so it didnt migrate and sod it all up. Not sure standard silicone is man enough but hey, it aint a daft idea if it works, right? If you were going to get proper anal about it, i suppose you could block the airline then pressurize it, causing it to swell and apply outward force, sealing it properly.

Bloody phone. Right. There. 😂

Just used it to fill the barrel bore while the tigerseal set. 👍

I've been an engineer for a long time. Electrical mostly but mechanical along the way with a bit of instrumentation to mix it up. I like doing things and generally playing, do 98% of the stuff on my cars and pretty good with the tools. So this Airsoft malarkey seems pretty straightforward so far. Shimming boxes and whatnot, growing extra fingers to put v2 boxes back together. So I was looking at how to cut a hop window into a barrel. Long story short I've got some busted stuff and I'm playing with it, to recycle. Greta would be orgasmic. 😁 So I've been looking at these R and S hop things. Engineering brain switches on and after inserting a bit of 6mm nylon airline, I coated the hop window with tigerseal. (If you've never used it, it's a polyurethane sealant and sticks to EVERYTHING and EVERYONE 😂) Tidied it up and let it cure for a few days. Pulled out the airline and it looks like a S hop. Haven't fired it yet but it's strong as hell!! Anyone tried this? I searched but nothing popped up....