woody_2231

VFC & TM are the most recommended brands for gbb ARs. VFC advantages: -excellent gas efficiency -durable steel FCG/BCG -Strong recoil -real spec parts -Decent accuracy ootb -High gas capacity VFC disadvantages: -Expensive/uncommon in the UK -Little airsoft specific aftermarket TM advantages: -Very strong airsoft aftermarket -Excellent efficiency and cold weather performance -Decent gas capacity -High ROF -Good accuracy ootb -Materials design around their limitations -1/3 cheaper than VFC TM disadvantages: -Unrealistic/toy-like design & action -Mostly zinc alloy -short inner barrel, low fps -Aeg spec parts WE system is no longer recommend because their design have basically no advantages over the aforementioned brands beside being cheap. Even then there's better alternative(double eagle mws clones). WE: -Infamous cheese zinc alloy construction -unrealistic internal design -poor winter performance -poor accuracy -Little aftermarket (besides ra tech) -Bolt lock failure -unappealing externals(steel parts stand out from alloy) As mentioned, double eagle mws clones are best bang for your buck since it's a direct clone of the mws with steel internals while being cheaper than a TM mws. The N4 and Ghetto blaster are both recommendable. However you may need to shim the magwell and replace the nozzle.

It was reported to be marui system "inspired". it will share some parts compatibility

Files are up on cults3d if anyone is interested.

Made four variants of the TM AKM GBB bolt shells, standard TM, MWS charging handle version, Galil, Type 3 AK47 (No lighting cut). The MWS CH bolt is used with the dust cover, and takes any MWS spec charging handles, CH does not reciprocate of course. The other bolt variants can be used on its own.

Ghk has repeatedly shown that they can't make good aks as evident in their V3 AK launch. V2 production already has a boat load of problems which they promised to fix in V3 but somehow made it worse. I should mention that V3 AKs no longer have parts OEM by LCT which makes it entirely GHK's fault. If you haven't seen it already, Explosive enterprises have a video on the GHK AK V3 at launch. TLDR: The gun is inefficient, sluggish, has a high chance of parts defect, contains multiple unfixable design flaws, inauthentic to its real counterpart and expensive. Just to name a few. GHK also lied to their customers, they paid 4UAD to have a "early preview" video and likely told them not to talk bad on the gun/ don't talk about too much aspects. Which is shoddy business practice to get people to drop £600 on a gun that GHK definitely knows is half-baked.

I think vfc went with 4.5mm pin so that people can still use the vast majority of airsoft aftermarket stocks. The aluminum mag helps with thermal transfer, which helps the mag to recover from cool down and allow a massive gas capacity. It's a trade off with realism, given how efficient the gun is, I think it's worth it.

explosive enterprises, badabing pictures, jaegerprecision, middle age gamer, etc. Some of the youtubers you listed aren't actual reviewers, they do paid promotions which can mislead people into buying garbage.

I don't have a E&C gen 4 but I have a E&C gen 3, the extracter is moulded into the slide so I'd imagine it would be the same on gen 4

Don't buy the ebay/Amazon propane adaptors, they are a waste of money. Get the jaeger precision adaptor or wait for the BAVTAC adaptor to come out. Also, buy Map gas (yellow bottles) because they are pure propylene and runs hotter than Blue bottles

same. they sent me a notification that the parcel is dispatched a week after I ordered. But it was delivered eventually.

If anybody is after a new bolt carrier for a mws, Ehobbyasia has some guns modify complete bolts for around £70-75 posted to your door. Almost half the price compared to UK retailers. Also their GM PMAGS are £51-53 posted. URL for the mag doesn't quite work but u can find them pretty easily on the website. https://www.ehobbyasia.com/products/guns-modify-evo-high-speed-and-enhanced-complete-bolt-set-for-marui-m4-mws-gbb

Update: parts arrived early, available for sale in this advert:

I purchased a batch of parts just now, lead time is the 11th of June. Pm if you are interested.

I've been planning on purchasing a small batch of TM AKM full travel parts printed in multi jet fusion. Which I plan to sell for £15 a set posted & paypaled. Are there any TM AK owners interested? Here are some shooting videos: https://www.reddit.com/r/airsoft/s/fwqP1BzVRZ https://www.reddit.com/r/airsoft/s/WTDJ0eA5pU 20240213_125127.mp4 20240217_114107.mp4

WGCSHOP 100%

DE mags are not the same as GM mags, they are both based off magpul pmags, but the guts are completely different. But you are right in saying that GM mags are better.

I just want to add that TM/ GM mags must not be used with the DE nozzle. If u changed the nozzle to the GM complete set, then there is no need to purchase the bavtac return spring.

I believe the NGRS body is largely the same as the AEG version so cyma TM clones have some hope to be convertible. I am not 100% sure so take my words with a grain of salt.

20240328_171751.mp4 Does the jam look like this? Are you experiencing it on TM mags?

Where did u buy it from?

k9 plumbing supplies sells 24x salvus propane for £122.40. If u add an extra bottle and make it 25 bottles, then enter 'plumb5" as the coupon code, u will be eligible for free shipping. Each bottle is 400g(~700ml) and only cost £4.85. It's worth getting a madbull adaptor and running propane.

picked up this DE MWS for cheap second hand, the mag is absolutely trash, but the system is solid. Anyone have the original iron sights for sale?

m5x12mm flat head screw.

and then blames people for it

I bought an AA pit viper on patrol base , TM AKM GBB on airsoft world, WE desert eagle on fubar bundy and a E&C glock on fire support using the defence and they all accepted it. So I say it does cover RIFs from all periods