Old man Jay
-
Posts
36 -
Joined
-
Last visited
-
Feedback
100%
Old man Jay's Achievements
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Tac41p boxed with all accessories and manual. Rapax 2+joule spring Leapers/ASG 6x40 rifle scope (this is a real scope and not an airsoft copy) 1 x extra short magazine (2 in total) Rifle bag Speed loader and a bag of .45g bb's. The rifle has only seen one game and has shot around 350 bb's, only upgrade is the spring, stock has been sprayed in camo colours. shoots 330fps on 0.45g bb £280 plus £10 for postage ono.£280
Market Rasen
-
Arch556 reacted to an advert:
MTW Milspec wolverine inc reg and bottle serial 002
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
5.11 LBE TACTICAL VEST 2XL Olive Drab, as new. Excellent vest for those of us that are on the larger size. actually fits and covers you better than plate carriers. Includes viper drop pouch in OD 3 m4 mag pouch in atacs (invader gear i think|) Single point sling in OD Olive green tactical belt Belt attachment loops in OD Radio Pouch in OD £70 posted ono£70
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Both brand new. £35 posted ono Warrior Single Quick Mag for 9mm Pistol MultiCam £17.95 Warrior Individual First Aid Pouch Multicam £27.95 Made from Genuine U.S. Milspec materials Height 6.69 inch or 17cm Width 3.14 inch or 8cm Depth 2.36 inch or 6cm£35
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
National match milspec free float handguard m4/m16 including box. National match 12" handguard, milspec barrel nut. Brought from Brownells and is a real steel handguard, fitted on my mtw perfectly with no shimming. Cost £110 and is now quite hard to get hold of. Really lightweight at 250grams and being real steel it is extremely robust. £60 delivered£60
-
Tippmann M4 V2 custom outer barrel
Old man Jay replied to LostThePlot's topic in Guns, Gear & Loadouts
Tippmann M4 V1/V2 OUTER BARREL - Custom Sizes Available - 14mm CCW - TA50006 | eBay Just literally seen this on ebay, 3d printed but maybe it'd be ok. -
This advert is COMPLETED!
- For sale
- Used
A project I was building that now needs gone for a newer project, Polarstar jack unit, includes original box and instructions. Custom grip line from HPA Airsoft Systema original ver 2 gearbox Strike Speed trigger 300 mah lipo G&P metal US Marine metal body ICS aeg grip Replica magpul acs crane stock and buffer Nuprol Bocca A 7" front hand guard inc vertical grip Lonex 6.03 inner barrel 229mm 19cm silencer. Maxx hop unit with at present a new madbull blue bucking (shoots straight with flat nub). I was going to paint the rifle, but as I'm not keeping it, I've left it ready to be painted unless you like the worn look. For me this needs a nice paint job and if you are a perfectionist, the charging handle and a fake bolt release, personally they just get in the way for me. £400 preferably collected, delivery possible.£400
, Lincoln - GB
-
This advert is COMPLETED!
- For sale
- Used
A few months old, includes the madbull metal hop unit. metal body in good condition with the addition of a 5mm grub screw near bolt release (this was for fine alignment of a polarstar fusion engine). magwell internally sanded for better fit on epm1 magazines. Includes both receiver pins. £45 delivered£45
- GB
-
Davegolf reacted to an advert:
MTW Milspec wolverine inc reg and bottle serial 002
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
MTW milspec serial numbered 0002, nearly as low as you can get In excellent condition with Hogue grip and replica magpul stock, external barrel shroud to hide 450mm madbull stainless 6.01 inner barrel. Spare o-ring set for engine included. Comes in the original box. Magpul trigger guard. Silent industries 2.0 hop arm with concave well done 70 nub. A very consistent DMR and easily strippable in the field. Balystix reg and line with 13ci bottle included. I'll also include a new epm1 short 170rnd mag. £650 collected or local delivery in Lincolnshire may be an option. Not interested in trades.£650
, lincolnshire
-
This advert is COMPLETED!
- For sale
- As new
Got this for a project that has since changed. Never been out in the wild, boxed with lense cloth and carry case. 4x32 magnification £119 when I got it a few months ago. £89.99£89.99
-
This advert is COMPLETED!
- For sale
- As new
Hard to find parts these days. New nozzle with dwell mod screw (this allows you to tune the dwell to get better accuracy and consistency) and new inner barrel clamps. a must for any m4 recoil tippmann. £30£30
-
This advert is COMPLETED!
- For sale
- Used
I had this for a cqb project that has since sold, in perfect condiiton boxed with cover and allen key, also includes a small riser ris. New battery installed. £23.99 posted£23.99
-
This advert is COMPLETED!
- For sale
- Used
having gone for a carbon bottle this is up for sale, little used and has a test date for 11/2024. 26ci is a really good size and a lot less bulky than the dumpy 48ci. £35 delivered£35
-
you might find a standard bore barrel a good start, might alleviate some of your fps inconsistences, also may solve your hop rubber issue. worth a punt to rule out the tight barrel.
-
I had the nozzle for sale but removed the advert, I have a few other bits and was going to put it up as a set, does your v1 have either the hard recoil buffer spacer fitted ? or the dave air saving device ? if either of these are fitted its best to remove them and start afresh. This will make dialling in your fps a lot easier. what barrel is in it ? I had a pair of madbull blue shark hop rubbers that actually worked fantastic in mine and they were cheap, hopped .3 no issue. Although the macron yellow should also be fine. Its easier to cut the end off the hop feed lips if you feel the nozzle is ruining them. Depending on who did the dwell mod you can put a bit of grease around the screw to stop leaks. Also pay close attention to your hop unit, I assume its a replacement tdc job, may be worth pulling it out and checking it over. also check the feeding manually to make sure there isn't to much resistance for the bolt when loading a round.
-
This advert is COMPLETED!
- For sale
- As new
Clawgear Operator Combat trousers Multicam EU58R new with tags. UK 40 waist. will fit a 42" waist easily in my experience. £85 inc paypal and postage. Brand new unused with tags. In a rarer larger size. Fantastic trousers with a lot of adjustment. They also fit D30 knee pads which are excellent. DESCRIPTION The Operator Combat pant sets the focus on its fit and versatility. In comparison to the Raider MK.IV pant it is being reduced to the essentials of a mission pant. It features the proven waist adjustment system with elastic components for better comfort and absorption of body movements. The integrated main thigh pockets offer sufficient room and provide a separate compartment for the user's smartphone � everything is accessible even when wearing gloves. A small pocket on outside of the thigh is construed to stow a knife or a pistol mag. The knee area is equipped with a handy inward knee height adjustment, stowed in the front main pockets. The modular knee pad compartment allows the use of a wide range of different knee pad inserts from different brands. We particularly recommend the optionally available TRUST HP from D3O which features outstanding knee protection. This pad can be installed via the button holes which have been integrated for this reason into the pant conception. The Operator Combat Pants comes with some more features: The belt area is optimized for rigger & safety belts as well as for suspenders and is comfortable due to the use of soft materials. On the inner backside is a hidden pocket which can be used for documents, e.g. a passport. The inside knee area is equipped with a convenient and moisture-wicking fabric to provide optimum sweat absorption. On the very bottom of the pant you can fix the leg-ends via gaiter hooks on your footwear to prevent the pant from moving upwards. Despite its comfortable fit, the pants robustness and reduced nIR signature (not valid for MultiCam Poly-cotton) are outstanding. 'YKK' zippers and high-grade sewing threads have been processed. All main seams are triple stitched for extra durability, many heavily used spots are furthermore reinforced with bar-tack stitches. Excellent wearing comfort, perfect fit and ease of movement Reduced to the essential of a mission pant Optimized for safety & rigger belt use Adjustable knee-height and integrated knee pad compartments Triple stitched main seams, reinforced areas via bartack stitches Robust materials Polycotton blend (65% polyester, 35% cotton) genuine Multicam 'YKK' zippers Lining in knee area made of 100% polyester£85