Cr0-Magnon
-
Posts
1,841 -
Joined
-
Last visited
-
Days Won
16 -
Feedback
98%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by Cr0-Magnon
-
For the amount of plinking I do, I can get by on using a big TM loader. As you mentioned, that type seems to work better than the GHK one.
-
Time Left: 3 days and 23 hours
- For sale
- As new
In fantastic overall condition, as it hasn't been skirmished and only subjected to a bit of garden plinking. Totally stock but with a TTI one piece Magwell added to assist with faster reloads. It also offers support at the bottom of the grip, which greatly improves how it feels in the hand. Included is an additional magazine, so you'll be ready to get out there. Stated price includes PayPal fees and postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£100
-
Not sure if there's an "owners thread" on this pistol? I've just picked one up and few queries/comments. The first being how the hell do you load these? I've tried angling the supplied speed loader as illustrated in the manual but really struggling to get more than one or two BB's at a time in. The only other GKH gun I've owned before was a G5 and remember they had a similar (the same?) speed loader attachment. However I don't remember having this issue to such a degree. Other than that I'm pretty impressed so far. The kick is not as snappy as the TM version (I guess that should be obvious, comparing to a plastic slide) but the recoil is definitely stronger. Overall this definitely isn't one for the "speedi boi's" but seems top notch for collecting, training, plinking etc. Also, I don't like putting unnecessary wear on my stuff, so don't do it too much but I must say, racking the slide is addictive. Unlike TM and VFC Glock's, there's no roller to get over, so it's smooth all the way but like a real pistol, it won't go back into battery unless you give it a nice sharp full pull back and release.
-
Appreciate the detailed response. I can stretch to an MWS and having had a TM MP7 previously, the best thing about it was that it never so much as even hinted at suffering from cool-down. I stupidly sold it, tried to replace it with a Vorsk VMP, which wasn't terrible but just not on the same level for consistent shooting.
-
Hi All, After likely retiring from skirmishing (at least for the foreseeable) and getting in to spring airguns for target shooting, I'm still thinking about picking up a GBBR for use in the garden. My garden is 35 metres long, well fenced and the neighbours are aware that these aren't real firearms etc. Anyway, as I want a semi-automatic rifle, I'm considering one of the TM MWS range. I of course know they're not shot on shot accurate like an air rifle can be, but in a similar position would you guys go for one or maybe a TM MP5 NGRS? I've always wanted an MP5 and can't wait any longer for TM to announce a GBB version.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
As per the title this is designed for Tokyo Marui Glock 17's but should also fit the 22 and 34. It definitely won't fit the newer Gen 4 and 5's though. This was briefly fitted to one of my builds and has some marks on the dummy ejector and the area it slides into but other than that is in excellent all-round condition. The standout part is obviously the CNC Steel slide, this provides the ultimate realism for any TM Glock build. It's a world apart from the Aluminium version, it's satisfyingly heavy but that of course does mean that you need to make provisions for increasing the power. Needless to say this wouldn't run very well on 134a gas. This set includes: -Guarder CNC Steel Glock 17 Gen 2 (U.S markings) Slide. - Guarder Nylon Fibre Glock 17 Gen 2 (U.S markings) Frame. - Guarder Steel Front Chassis. - Guarder Recoil Spring (the one designed to be used with Steel slides). - Guarder Blowback Housing. - Guarder Enhanced Nozzle Spring. - Guarder Enhanced Hammer Spring. - Guarder Steel Dummy Ejector. - Guarder Front and Rear Sights (2x Rear included, one of which is the Night Sight version). You would need to add a Guarder Steel outer barrel and possibly a reinforced nozzle if you're using high-powered gas but then you've got yourself the ultimate Airsoft Gen 2 Glock 17. Stated priced includes PayPal fees and tracked postage. Please PM me any questions as I don't get notifications for anything asked on the listing.£159
-
This advert is COMPLETED!
- For sale
- Used
Very snappy with TM's excellent 15mm cylinder. Great gas efficiency too, in testing I was getting over 60 shots on the Glock 19 mag. Recently cleaned and lubed, ready to accompany you into battle. As pictured I am also including a TM Glock 17 magazine, this works perfectly in the gun, obviously it doesn't sit flush with the bottom of the grip but it does provide you a higher BB capacity and more gas, both of which can make all the difference during intense CQB situations! Stated price includes PayPal fees and tracked postage. Please PM me any questions, as I don't get notified of anything asked on the listing.£115
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
I don't think this was ever used, it's certainly in excellent condition. Again, just listing parts and gear because I've stopped playing. Features * NUPROL Multi Function Bipod. * Spring Loaded Legs. * Rubber Stability Feet. * Fits 20mm RIS & Bipod Lug. * 20mm RIS Adapter Included * Tough Alloy Construction. * Multiple Position Legs. * Adjustable Tightness. * Rubber Pads for Reduced Scratches. * Legs Fold Away When Not In Use. * Ideal for Long Rifles / Snipers. Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£16.50
-
Time Left: 3 days and 23 hours
- For sale
- As new
This listing is for both of these lightly used LiPo battery bags/pouches. These should only be considered an additional layer of protection and not a guarantee that damage will not occur, should there be an issue with the battery stored inside. Stated price includes PayPal fees and postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£13
-
A strange one, I've also had a visit (at work actually). Once I was able to explain I was importing it using my UKARA defence, because I was an active airsofter, they were satisfied. We even joked about it, as several of their colleagues were airsofters too. The RIF remained seized by Border Force though, as by that stage I would have had to go to court over it and I didn't think it was worth it. Don't forget, even if you have a valid defence, the RIF may be seized if the shipper misdeclares to customs. ie by stating "toy" or "model part" etc.
-
This advert is COMPLETED!
- For sale
- As new
These have only been lightly used in a bit of garden plinking and then kept with the gun in its pistol case. No cracks in the baseplates or leaks. However I will need to de-gas prior to posting. This can dry the seals out a little bit, if that does occur, it's nothing a little re-lubing won't solve. Suitable for TM 4.3's or 5.1's, although you'll need to make sure they can be used with any after magwells. Stated price includes PayPal fees and tracked postage. Please PM me any questions, as I don't get notified of anything asked on the listing.£40
-
Time Left: 3 days and 23 hours
- For sale
- Used
2 x Official Slings for the ASG Scorpion Evo. These have been used, so some signs of wear. Mostly paint chipped off the metal parts but the straps themselves still in good condition. This adaptive sling is designed especially for the Scorpion EVO 3 A1. It allows for a multitude of carry styles. It is made to transition quickly from style of carry to another. Designed to accommodate even larger players wearing bulky tactical vests. The quick pull tab is constructed to eliminate snagging when moving through brush and woodland environments. The price is £12.50 posted for one sling or £22.50 for both. Stated price includes PayPal fees and postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£12.50
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
I briefly installed this on my TM Dual Stainless. It was a perfect drop-in, so I haven't modified it in any way. Minor marks may be present though. The included photos of it on the aforementioned pistol are to show what it looks like when fitted, the PISTOL itself is NOT INCLUDED for the stated price. If you're interested in purchasing it fitted to the pistol, please let me know and we can discuss a price for that. Manufactured by Airsoft Masterpiece, you know it's very high quality, with deep engraved Limcat markings. Included in this kit: - AM Limcat 4.3 Slide in black and silver dual tone. - Guarder Stainless 4.3 Outer Barrel. - Guarder steel front and rear sights. - Hi-Capa Hub ‘TORQ’ 140% Recoil Spring. This kit easily transforms that plastic Hi-Capa into something that's not only beautiful and satisfying to hold but a legit CQB beast. Stated price includes PayPal fees and tracked postage. Please PM me any questions, as I don't get notified of anything asked on the listing.£90
-
This advert is COMPLETED!
- For sale
- Used
A fantastic bag with a ton of pockets and space. Relatively lightly used and in the best colour. Features: * Adjustable removable shoulder strap. * Dual carry handles with velcro fastener. * Large zip opening top flap with two external zip close pouches. * Large main compartment. * 2x zip-close side pouches with external zip close pouch. * Molle on side pouches * 1x external zip close pouch with two external buckle close pouches. * 1x External zip pouch with external molle. * 1x external velcro close pocket. * The holdall has five small feet * 2x D-rings. * Small velcro strip for attaching name tags. * 4x side compression straps. Capacity: 100 litres Size: 31" x 15" x 13" Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£30
-
This advert is COMPLETED!
- For sale
- Used
Still in good overall condition, some minor marks from use but they are made from a super-tough material and function exactly as they should. The price is £22 posted for ONE or £40 Posted for both. Features: * 375 Round Capacity. * Official Scorpion Evo Magazine. * Large door for pouring in your BB's. * Easy large wheel winding base. * Easy to use, fill and load whilst wearing gloves. * Thick durable polymer design. * Easy to dismantle if ever required. * Thick ERGO hold for those who like to hold their gun and aim whilst holding onto the magazine. Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£22
-
This advert is COMPLETED!
- For sale
- Used
These have been on a bag for a while, so "used" but still in decent condition. PVC with velcro back. Thought I'd list them for sale as there seems to be a long backlog when purchasing directly through the forum. Stated price is for BOTH patches and includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£12.50
-
Time Left: 3 days and 23 hours
- For sale
- Used
Another lightly used item but I'm clearing out most of my gear as I'm likely "retired" from Airsoft. Nuprols PMC Deluxe Pistol Bag is designed to protect upto 2 pistols with magazines while in storage or transport. Features: Soft padded sides Full zip closure allowing you to open it flat. Large front pouch for extra kit. Velcro panel on the front for ID patches. MOLLE loops for adding extra small pouches. Elasticated magazine pouches inside. 2 large padded slips for storing up to 2 pistols Size: 35×30×5cm Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£16
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Another lightly used item but I'm clearing out most of my gear as I'm likely "retired" from Airsoft. Fits three MP5 (I've found it works well with Scorpion Evo mid-caps and likely some other types of 9mm style) magazines in total. Individual flaps with Hook-and-loop closure Two 8" (20.3cm) attachment straps with press studs on the back 3x3 MOLLE attachment straps on rear Drainage holes on all compartments Fully MOLLE compatible Material: 600D Polyester External dimensions: 8.5"x5.5" (21.6x14cm) Weight: 180g Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£10
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Left-Handed Warrior Assault Systems Universal Pistol Holster in Coyote Tan. Only used a 2 - 3 times, description below from a retailer: The Universal Pistol Holster is a versatile adaptable holster that fully adjusts to accomodate a wide variety of large and small frame pistols. Adjustment is simple and quick by way of velcro closure. Sidearms are secured firmly by way of a moulded composite internal housing. The weapon is released by means of a push down thumb release. The rear of the holster has 3 rows of MOLLE webbing with 2 MOLLE arms, which allows it to be attached to a diverse range of Warrior Assault Systems gear such as the PLB belt, Frag Belts Cobra and Rigger Belts. The UPH's MOLLE also allows it to attached to armour carriers and chest rigs such as the DCS, the new 'Nemesis' or the 901. Made from high quality US Mil. Spec materials. Stated price includes PayPal fees and tracked postage.£23
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
A solid 300 lumen torch in excellent condition, easily mounts to most 20mm Picatinny rails. As far as I can tell it doesn't have a strobe feature or adjustable brightness. As pictured it can be operated either just by pushing the button on the rear for on/off or using the pressure pad attachment. You will likely need to source your own strip of velcro for that. Stated price includes PayPal fees and tracked postage/courier. Please PM me any questions, as I don't get notifications for anything asked on the listing.£25
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Again this is a LEFT-HANDED holster. Genuine high quality Fobus product, active retention and fits the TM Glock 17 Gen 5 perfectly. As well as many other real-spec Glock models. Really lightly used, never taken to a game day, just had a pistol inserted and removed a few times and put back in the cupboard. So minor marks possible but nothing affecting function or longevity. Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£21
-
This advert is COMPLETED!
- For sale
- Used
This was a secondary vest for me, so again it's not had a ton of use. There are some white marks present from BB hits (may come off with some wiping), however overall it's in good condition with no significant abrasions or fraying etc. Also included is the Kombat Tactical utility pouch pictured. These are usually purchased separately. Product Summary: - Updated JPC vest designed for buckle-based system - Webbing MOLLE panels for easy attachment of accessories - Adjustable shoulder straps for a comfortable fit - Includes Buckle-Tech triple magazine panel - Front and rear Velcro ID panels for customization - Front and rear plate compartments for added protection - Made from durable 600D Tac-Poly material - One size fits most for convenience and versatility Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£35
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Lightly used, something like 2-3 times. So still in great overall condition, should serve you well for a good while yet. Provides a lot of carrying options in a small surface area and obviously has the benefit of allowing more movement and aeration than a plate carrier. Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications of anything added to the listing.£22
-
I've just stuck a AM Limcat slide on my TM 4.3. It runs fine but I guess the added weight has made it a touch more sluggish (nothing drastic). I'm using a Guarder lightweight BBU, as I already had one lying around and I don't want to spend a ton on this build. Will changing the hammer spring make a positive difference? Any other recommendations?
-
This advert is COMPLETED!
- For sale
- Used
Used but in good overall condition and should have plenty of life left in it. It's also had a few modifications to the foam in order to accommodate a foregrip and store a couple of batteries. However it can easily be used without either of these, the structural integrity of the foam remains solid. Included free of charge is the pictured lightly used mid-cap mag, bargain! Stated price includes PayPal fees and tracked postage. Please ask any questions via PM, as I don't get notifications for anything added to the listing.£30
