MadMole
-
Posts
187 -
Joined
-
Last visited
-
Days Won
1 -
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Posts posted by MadMole
-
-
I run a shock washer on all my GBB pistols, mainly cos I use the highest gas I can without exceeding 350fps, which is normally red or black. personally I think it reduces shock load and preserves TM plastic slides (I haven't had one break yet!)
-
Forget both, just get Titan's end of any issues
-
On 01/07/2020 at 22:10, RC1124 Sparky said:
It arrives tomorrow mate so I’ll let you know then.
Did it come? did you get the correct manual, if so could you PM me a a copy please
-
3 hours ago, L3wisD said:
I know Dave really well, went to school with him and he used to cadge a lift on the back of my motorbike
-
Sniper mode on most Mosfets, is that AFTER firing, you cant fire again for 5 secs to simulate you having to pull the bolt and cycle a new round into the chamber. Never heard or a delay after pulling the trigger before firing, that would be stupid and result in you walking to the respawn a lot
I could possibly see a slight random very small delay being useful to prevent anticipation issues (like 0-0.3 seconds)
-
Other way round, SRC have improved tremendously in quality over the last couple of years and are pretty solid builds now. full aluminium, not pot metal. 8mm bearings and double O ringed everything. Only issue with the Mamba EBB's is the total lack of a manual for them and they dont strip down as other M4's. I have 2 SRC G36 Gen 3's and a Mamba S Gen 3 EBB, amongst many rifs, all are good
JustBB's are the UK SRC importer, they have a deal to rebrand them as their own brand Bulldog. They are the local shop to me and yes, they do cater for the 5 year old Blue gun brigade but they are actually very helpful and do have a good proper RIF selection. Don't understand some of the anti feeling for them
RC1124, did you get the correct manual with your Mamba?
-
Strange, G36's are not mag sensitive at all normally, if it clicks in it feeds
-
Did you change your hop unit? much more likely on a G36 that your hop feed tube isn't quite in the right place and the tension is overcoming the friction caused by misalignment. Or your nozzle length is wrong or the tappit plate not sat correctly or bent. Did you change any of these?
I have 4 G36's and have serviced many makes of them, they are very critical of nozzle length and not all makes work with all nozzle's. plastic tappit arms get bent etc, even .5 of a mm makes all the difference
-
EDcase, I have a couple of those, but not from Aliexpress and they are actually good sights, the 4X mag is good if your shortsighted like me at a distance and the plain notch sites on top work fine in CQB, The killflash's with the little arm on the side work perfectly with them if you cut the arm off and ram em in
-
-
Novritsh Bio BB's (dont mock)
The main material of the sample is s Polylactic acid (PLA),. Inorganic Filler Content: 85.1 % BaSo4 + Cerium Oxide.
They are moisture insensitive (never had one jam even after bag open several months, kept in damp workshop), and certified to German standards to be 100% biodegradable
Used them for last year, very consistent, no failures, no air bubbles or surface marks (unlike the AGS I used before) and cheaper for heavier weights. Very nice BB's.
Now use them exclusivity 0.28 for AEG's, 0.36 for pistols and 0.4 for sniper. Cant see any difference from his non Bio's
-
Does anyone have a manual or disassembly instructions for one. Nothing on the Star Rainbow website, You Tube etc. manual with it is for older generations. I've rebuilt loads of M4's, but for the life of me I can't work out how this one splits.
-
-
On 31/08/2019 at 17:38, hitmanNo2 said:
I need a Lipo charger. I gather the Imax B6AC V2 is the one to go for? I see ones on ebay for around £20 and then more expensive ones branded SKYRC on Amazon which I assume is what all the clones are based on? Should these generic ebay ones be avoided or are they OK? There seems to be lots of versions/copies and it's a little overwhelming. I would normally just go to component-shop but I don't recognize the chargers they stock.
I have a bay B6, it heats up batteries while charging, then I have a top of the range SKYRC charger that does 2 at once and batteries charge as fast but never even warm up. Get the SKYRC chargers, your batteries will thank you and long term it will be cheaper.
Never really rated the B6, had several for RC cars and always had issues
-
lucky you, still waiting for mine
-
My toy
SRC Gen 3, full metal
Madbull 6.03, Gate Titan, SHS hi torque motor, 16:1 gears, shimmed, Prom purple bucking on airsoft pro hop up. 110 spring, bearing guide, double O rings all round etc
327fps at 17rps on 0.2 bb's with 8.6v. 1" group at 16m
I'm blind in my right eye, so have sights on a riser so I can use left eye on red dot on right shoulder and both sights on left
Other g36 was a broken one I got cheap. Idiot had over springed it and gears jumping, plus magazine broken. easy fix, now 367fps at 11rps. need to put lower spring it. horribly plastic CYMA. The SRC is leagues better quality
Sealing Leaky TM M9 Mags
in Gas Guns
Posted
Silicon grease the O rings as a first try always. if you are using silicon or blue hylomar you don't need much and just put a little on the old o rings. You are trying to seal minute holes, not a big gap