HuttArmouries
-
Posts
947 -
Joined
-
Last visited
-
Days Won
10 -
Feedback
100%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by HuttArmouries
-
So ive seen these around with very limited information. Seems to be about 200fps, holds 17 bbs and has the battery in the magazine. It works on a system similar to the gbls das or some of the older guns that preceded that and some newer nerf guns. That meaning you get a mechanical trigger that releases the sear on the piston and then the motor automatically kicks in to recock that piston and make the slide cycle. Probably a bad idea to be an early adopter but ive always liked aeps and this just seems so cool ive ordered one. Ill post more once I have it. No spare mags available anywhere at the mo but its only been out for 4-5 months or so and less than that in the uk.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
selling this akm gbbr and some parts for it. Postage is £10 via dpd next day The base gun has been repainted a couple of times and is in full working condition. the internals actually came out of a wallhanger I bought so everything inside is stock and has very little wear. The rearsight block has had one of the tabs that hold the rearsight break and was dremmeled by the previous owner to fit a cyma railed dust cover. so I have drilled and tapped the rearsight block and bolted the texas weapons systems style dust cover directly to it with a longer bolt. this didnt require modifying the dustcover at all and is very solid. I do have an undamaged rearsight block coming that I can chuck in with this though it would still need a new rearsight and rearsight spring. I do have the original box kicking around Gun with the slr kit, picatinny stock adapter, 3d printed magpul style grip and 5ku stock + cheek risers _+1 magazine also has a rear sight mounted to the picatinny. £600 posted I can instead swap it over to a more standard config with the ra tech woodkit, standard dustcover and standard pistol grip as well as the original barrel length and pistol length though I dont have the rearsight as mentioned Looking for £475 posted in this config with 1 mag If you want the whole lot it will be £650£475
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looking for a taggin launching setup either a set of shells or one of the standalone launchers. A tag 15 front loading launcher would be ideal but an ml 36 would also be goodNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Postage is £5 via royal mail or £10 via dpd. prices include paypal fees 4x Fiber optic acog clone and killflash. Has been fitted to a gun but never skirmished £62 Eotech 558 and 3x magnifier clones Fully working. SOLD 3.5x prism scope russian vomz clone. works well, illumination works as it should £25 rmr pattern micro red dot. Comes with a picatinny mount and a glock plate that looks to be compatible with tm style glocks, cant confirm that though. also comes with a rubber cover and its adjustable with 7 brightness levels via the button on the side £22NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Both bought for projects that i ended up finding better alternatives for. Prices include PayPal fees and postage. Acog is 4x and is fiber optic illuminated. Ignore the bit about having an rmr on the box £65 Bipod was bought, taken apart, put back together and left to gather dust so its had very little use. £18 £75 for BothNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Has been put on a gun and skirmished once then taken off. Steel kit is real power, wood kit is ra tech. There is a minor patch of delamination on the stock but it seems to be a part where 2 layers didnt quite stick. Rather than a split. Also includes the stock tm grip Price includes fees and postage£220
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
A fully working clone of an sro red dot. Price includes postage and paypal fees. This one has a polymer body so it is ideal for mounting on a pistol. Just the red dot. No picatinny mount.£20
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Ordered a 380mm handguard from ares and they sent me a 345 >~> there is a small defect in the paint at the front but its otherwise brand new. Price includes postage and fees£40
-
So I know Ares guns are bad but I thought to myself "surely. even they cant fuck up a handguard" so I got one of their octa arms mlok ones off their website..... they sent me the wrong length.... >_> ffs Ares....
- Show previous comments 2 more
-
@The_Lord_Poncho could it be they're two different threads?
I've got a contact in China who makes rails but finding hard to sell since selling via stores like Aliexpress is now forbidden. I was thinking about offering to get them drop-shipped. Not sure if worth the time and effort, are people still looking at buying different rails? -
@ak2m4Would that happen to be the place that used to be called Handguard aeg shop On aliexpress? I did wonder why they pulled all their products. I have one of their fsp handguards and its very nice
-
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
we glock 23 select fire Has minimal wear. Was used as a doner gun in something else so it was taken apart and put back together. Is complete with the exception of the faux extractor and fully working. Comes with 4 glock 19 length mags, 1 we and 3 kjw. 1 of the kjw is leaking and missing its baseplate. The other 3 mags are leak free and fully working. Price includes paypal fees and postage£70
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
So i realise they have just hit uk markets really but Its still worth a try. If anyone has made a poor financial decision and wants to shift the pistol they just picked up ill happily take it off your hands XD£90
-
So in all my various dealings and buying and selling ive ended up with about 30 magazines for the kj works m93r rebranded by si. Minor problem is that noone seems to have one. Ive never seen one in the wild and no one wants to buy the mags. Secondly ive always wanted some sort of little sub machinegun as both a sidearm to my lmgs and as a nice light gun for more compact fields. and so I decided to build one. Ive made a new nozzle to work with these mags but it uses glock rocket valves and piston heads. It blows back already but obviously I cant test feeding or fps yet. Either way I didnt really expect to get it this far but it just worked first time I tested it XD. Im probably gonna go for something like a vz23 with a simple metal tube upper. Eventually a beretta mx4 storm may be on the cards since these are beretta mags. We will see how it goes.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Postage is £5 via royal mail or £10 via dpd 1 6-9 inch bipod with tilt and swivel. Bought this for a project but it turned out to be the wrong fit for it. Been taken apart and put back together but is otherwise new. £15 2 clone of a vortex spitfire 5x prism scope. All works as it should. Has a doctor style red dot mounted to it and comes with the low and high mounts. £65 3 2x 30mm lpvo mounts £5 each 4 surefire style pistol torch. £12 5 3prong flashider £3 6 3.5x vomz clone prism scope with lens protector £30 7 tokyo marui mws csrry handle £5NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- As new
Postage is £5 via royal mail £10 via dpd 1x raven glock 17 lower. Taken off a brand new gun that was stripped for parts, just the lower £5 1x we glock 19 lower. Has trigger frame but nothing else in it £8 1x we glock 18 lower. Has trigger and frame in it but no hammer unit. £6 1x we p226r lower with hammer and hammer drop lever £7 2x raven metal g17 slides £4 each, both brand new 1x green 1x black 1x we glock 19 wet slide £8 1x we g26 ported outer barrel £3 1x raven g17 outer barrel £2 1x we glock 19 gold outer barrel £4 2x raven g17 recoil springs £2 each 1x we glock 19 recoil spring £3 10x we m9 feed lips £1 each 6x we xdm magazine extended baseplates. 1x we xdm 3.8 compact mag £5 1x silver we cheetah mag £5 1x we extended inner barrel and suppressor kit £10 1x we hi capa blowback unit and nozzle £3 1x we high capa 3.8 outer barrel £2 7x we glock 17/18 nozzles with rocket valves £4 each 1x unknown brand clear glock 17/18 nozzle with cnc metal rocket valve £5 1x kjworks grey nozzle £3 3x kjw usp tactical mags £4 eachNO VALUE SPECIFIED
-
What have you just 3d printed (for airsoft)
HuttArmouries replied to sp00n's topic in Guns, Gear & Loadouts
bottom half of the belt feed mech is getting there though I still need to build in a way to attach the box mag / mag adapter. Still tweaking the hpa adapter but it now only seems to leak from the bolt holes, the top half is entirely sealed so it may just be a matter of getting a metal one so I can better seal the threads. Decided for the vn mags ill be mounting it so they come in at an angle just below the feed ramp on the side so that the hanging belt can hide the end of it. should also mean I can get lower to the ground. I had a beaten up old tm g3 bipod and the hk21e bipod seems to use the same latch mechanism so i just chopped it a little shorter and made a new block for the top of it so it can slide into the handguard caps. -
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used or as new
Looming for a working tag 15 launcherNO VALUE SPECIFIED
-
What have you just 3d printed (for airsoft)
HuttArmouries replied to sp00n's topic in Guns, Gear & Loadouts
Yeah Ive seen that one though since im basically modifying a rifle its closer to their colt lmg or hbar builds -
What have you just 3d printed (for airsoft)
HuttArmouries replied to sp00n's topic in Guns, Gear & Loadouts
You posted this just before I was about to put an update on XD. So originally I was trying to use the original mag and hide it inside the box mag which would have lead to a much larger box mag than reel steel. I was also considering chopping the mag in half and splicing it smaller until @The_Lord_Poncho Made a suggestion that had somehow entirely slipped my mind "3d print one" And so I have designed and printed a new bottom part using the top half of the original we magazine, no modification needed. To be clear this will be sent off to be machined or printed in metal before I use it but I have tested it by pumping it up very slightly with my hpa pump (while wearing safety glasses) and it does infact cycle the gun just fine though it leaks around the bolts even with o rings which a metal version will hopefully fix. Did also have to remove the paddle mag release to get the connector in a good spot. having it this short also opens up an interesting possibility. I think I am going to add onto the bottom of it a dovetail or something similar and while I will make a box mag to use I am also considering a magazine adapter for vietnam style short m4 mags. With the belt feed mechanism and a short length of dummy 7.62 the mag would be barely noticeable and id be able to run the gun without the need for a box mag. Obviously Id need to get myself a supply of vn midcaps which are hard as hell to come across right now but I think this could be a great way to use it. If anyone has any suggestion's for some other 100 or so round midcaps that would be small enough to not be noticeable Id appreciate any ideas. Also 3d printed a guide to mark out the holes on the handguard and started drilling and cutting them into some 40mm aluminum pipe. The raised ridges on the handguard will be 3d printed additions and all of the small holes are threaded for m5 bolts so I can swap the ridges out for rail sections and the offset foregrip when I get around to modeling and printing it. -
I Had a kwa mp7 for a while and it was pretty good but the moment the temperature dipped at all it became a bolt action so I ended up shifting it Also the reason the tm one is 90% scale iirc is that they developed it when very little real world info for the real thing was available so they were basically trying to scale and build it from the few promo pics h&k had out at the time and it ended up a little small.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Postage is £5 via royal mail or £10 via dpd AK / Svd parts 1- New src version v3 gearbox casing £6 2- unknown brand v3 gearbox casing £4 3- polymer railed upper ak handguard £3 4- polymer railed upper ak handguard with gas tube £5 5- 2x steel ak dust covers £4 each 6- cyma ak74u metal railed handguard. No hardware, just the handguard £8 7- aimtop brand new svd magazine. Fits king arms £5 8- lct ribbed polymer handguard £10 9- tokyo marui akm gbbr front sight, slant break and gas block £10 10- jg front trunnion for ak with inner barrel and hop unit £10 11- ak style flash hider £5 12- 2x ak leaf sights £5 each and 1 sight spring £3 13- ak gas block and tube £5 14- 2x aeg ak grips £5 each 15- bulgarian style 5.56 ak micap cyma £8 G3 parts 16- 2x tokyo marui g3 front sight blocks £4 each 17- tokyo marui g3 outer barrel and flash hider £5 18- tokyo marui g3 lower reciever £5 ar / m4 parts 19- Bolt metal upper reciever £10 20- Ar outer barrel. not sure of brand or compatability £5 21- 2x buffer tubes. Both are the type that threads into the lower reciever rather than using the bolt and washer. Unsure what brand £4 each 22- tan grip with baseplate £5 23- long birdcage flashhider £4 24- 2x dust covers £3 each 25- m4a1 handguard with aluminium heatshield £8 26- tan charging handle £4 27- lots of sets of m4a1 handguards £3 per set 28- 2x stubby tan stocks. Come with buttplates, sling loops and the bolt to secure the sling loop but not the long mounting bolts £5 each 29- black stubby stock just the stock body £3 30- "pistol" style aeg buffer tube £4 31- 2x we katana m4 upper gearboxes £8 each G36 parts 32- G36 lower with internal selector parts £5 33- g36 standard magwell £4 34- g36c handguard £5 35- we g39 gbbr complete trigger unit £20 mp5 parts 36- mp5k handguard £5 37- 2x cyma mp5 midcaps, 1x high cap £15 for the 3 General parts 38- folding picatinny foregrip £4 39- unknown outer barrel £2 40- magazine clamp £4 41- S&t polymer m249 rail system £5 42- we p90 gbbr magazine £20 43- aep 100rd mag £8 44- Scar buttplate £5 45- 9x 20rd lowcaps for mp7 aep £15 for all of themNO VALUE SPECIFIED
-
This advert is COMPLETED!
- For sale
- Used
Has been skirmished once. Its internally stock but has been fitted with a real power steel body and barrel kit and an ra tech wood kit. Price includes fees and postage. I am also willing to split the steel body and woodkit seperately. comes with 2 fully working magazines. steel kit £190 woodkit £85£650
-
This advert is COMPLETED!
- For sale
- Used
2x nuprol wheeled rifle cases. 1 has its original foam £50 posted. 1 has had the foam replaced and has cutouts for ak mags £40 £80 for both posted Evike pistol case £20 postedNO VALUE SPECIFIED
-
Probably but the problem is 3d prints arent gas tight so id need to send it off to be made before I knew if it worked at all. I might give it a go. See if I can effectively just make a shorter magazine body since this is what comes out of the top of the g3 mag when you take the screws out.
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Postage is £5 via royal mail or £10 via dpd 1 Wadsn dbal a2 visible and ir laser and torch. (plastic bodied version) Comes with its original stickers and a pressure switch £45 2 knockoff vortex spitfire 5x prism scope with doctor style red dot on top. Works great. Has been mounted to a gun, taken off and put back in its box but is otherwise un used. Comes with the low mount as well £85 3 3.5x prism scope. Copy of a russian scope. Works perfectly. Includes a 3d printed lens protector £45 4 wadsn offset surefire torch and pressure switch. Comes with normal picatinny mount too £30 5 wadsn surefire pressure switch. pin in the connector is damaged so it makes the torch flicker. Could be fixed with some poking probably £5 6 30mm lpvo mount with picatinny on top £10 7 ak style flash hider £8 8 Surefire style picatinny torch £ 10 9 ak rear sight picatinny £10 10 one piece 30mm lpvo mount. £12 11 surefire style flash hider £8 12 2x old school visible lasers with pressure switch and picatinny mount £10 13 m4a1 style rail covers £2 each 14 mws m4a1 handguard with barrel nut and slip ring £15 15 2x mws 35rd mags. SOLD 16 1x tm type 89 mag SOLD 17 4x 20rd mws magazines 2 sold 18 b&t style mp5 / g3 claw rail £20 19 4x barrel nut wrench £10 20 thumb rest £2 21 scope protector £3 22 picatinny micro red dot £12 23 rmr picatinny plate £3 24 boneyard doctor style red dot. Dot appears far too high to use and needs bringing down. 25 Acog piggyback doctor sight mount £3 26 doctor style picatinny mount £3 27 Fast helmet gopro mount £5 28 red dot riser £3 29 Scope riser £4 30 3x dan wesson speedloaders with 11 shells £12 31 l85 to picatinny adapter £5NO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
All 3 of these have been modified to fit the we g3 gbbr Real steel handguard. very good condition, rear has been bored out to fit over the we barrel nut but its otherwise in perfect condition £10 Real steel stock. Heavily worn, front end has been modified to fit onto a we g3 stock cap. £8 Bowmaster sliding stock for vfc g3. SOLDNO VALUE SPECIFIED
