AngryDad223

I’d stick with Marui or ASG to be honest. I use a mix of Marui and ASG they work well in both my TM and ASG MK23s

Hey all, I've decided to go down the DMR route with my MWS, it currently has the 14inch outer barrel with the standard 250mm inner. Ive just crooned it at 315 FPS on a .2 BB. Having a read through would I be right in assuming that a longer barrel will get me near DMR territory or is this grossly over estimated? I am running the stock hop chamber but with a Maple leaf bucking & nub, accuracy is brilliant though it seems hop can be somewhat inconsistent every now and then. Ive seen the first factory strike arm, will this help stabilise the effectiveness of the hop or should I be looking at a new chamber? Thanks

Thanks, I was at the right angle as I have to do that with my adapter I’m gonna assume it’s just the can? WE Green 2x gas. It’s was 20 degrees C so warm enough. It’s more the gas in that no matter what angle, pressure etc it just spits out the side freezing up around the fill valve.

The WE can has a plastic nozzle, my propane adapter on the other hand has a metal nozzle and fills fine what’s the fill and tilt method? No matter what angle, duration etc it just doesn’t accept gas with the WE can

Hey, bit of advice please. I’ve owned my MWS for years now and have always used Coleman’s propane with an adapter. I had run out so bought some WE green gas on site over the weekend. I couldn’t for the life of me get the mags to accept more 10 shots worth of gas it just spewed out? Anyone have any ideas as to why

Hey All, just a quick report on some issues (not really) that I experienced today with my MWS at a skirmish The morning was cold so I swapped out my Aluminium Buffer for the OG plastic one. I noticed when loading up more of a twang from the buffer spring, I put it down to the lesser weighted OG buffer.... down to firing it felt slightly sluggish, but I cracked on all day. I only typically use semi so when the day was over and I unloaded my mags using full auto was like an old hand cranked machine gun. I closed the stock and noticed a spring noise, taking the stock off i noticed the end cap had come clean off. The small retaining screw had jumped ship but it is threaded so should be okay for now. Realistically I’m quite impressed, with such a bad ‘malfunction’ it still worked, all day. Gas efficiency was poor, but power was OK and it didn’t miss a beat. to top it off, the site I played at was super dry / dusty. My MWS was absolutely filthy, the bolt was covered all over in crap as was the nozzle. But again it ran like a champ. I’ve had pistols with less dirt in them fail. the point of this post is double pronged, I’m curious to know if anyone else has had the buffer tube cap unscrew? but more importantly I’m super impressed with its reliability, I’ve owned this for a good while now and I’m still like a big kid every time I get to use it

I had some issues with my fairly new (sub 2 months old) MWS, that was the hop was shocking and the rifle was so inaccurate. Took it apart and the stock rubber was very deformed as was the stock nub. Replaced with ML Autobot & omega nub..... the difference is unreal! Accuracy is spot on and the range is amazing

Thanks bud, just ordered a new bucking and nub here’s hoping it fixes it 🤘

Hey, just done some plinking and for what ever reason my MWS has become insanely inaccurate. Hop wise it’s hit or miss but most seem to have the same hop but the left/right is all over place 😞 Rifle is like a month and half old now and stock inside Running .28’s

I've been softing for 17 years now, ever since i was 16. Wow time fly's. I have so many epic stories, moments and memories from over this time. Met some great people, some not so and had some insane moments. In reality, bar the sheer amount of gear you can get now, affordably not much has changed from what i can remember. Battery tech is the most obvious change and very welcome, gone are the days of trying to cram a days softing in with the great big batteries of yesteryear. I've owned pretty much every type of gun, (AEG, GBB) from the OG brands These where only Marui & CA really when i started, well that is all i ever bought from Fire support. Up until maybe a year or so ago i had my CA M16A4 that was my second ever purchase, it would be 17 years old now and it still worked fantastically, only having 1 rebuild ever before we parted ways, it had been my main weapon for at least 6-8 years. Fire support at the time where easily the go to shop, though i frequently placed HUGE orders from Japan. I have introduced so many people into the scene over the years, i started taking my brother in law when he was 12, hes now mid 20's and we still go a couple times a month.

Does anyone here run a 'suppressor' i know they make a tiny difference generally speaking but something to calm the report down to people at a slight distance? i find every time i engage they know to look my way lol (woodland setting)

Where did you get this from? Thanks

Good job there! How did you get that finish?