Jump to content
Updated Classifieds rule 5 - Adverts must include your username and date in photos

Solly4568

Members
 View Profile  See their activity

  • Posts

    230

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by Solly4568

  1. Solly4568
    You need to twiddle the screw on the bottom left that goes out of trigger box. That should fix it
  2. Solly4568
    A butt ton of ammo for ma weapon 😀
  3. Solly4568
    Yeah, its to do with your adjustable trigger not being set correctly. you have to fiddle with a few screw then you are golden
  4. Solly4568

    Well, this is going to be fun, the forecast for tomorrow is saying hail. preparer for no hits to be taken and plenty of:

    HIT
    HIT 

    IM HIT IDIOT 

    STOP SHOOTING ME YOU DICK 🤣

    1. Rogerborg

      Rogerborg

      Mil-Spec umbrellas needed.

  5. Solly4568
    I put the m150 in mine with the upgraded bolt, spring etc and I was getting 600fps!!! I am now running a m140 in mine and I am getting a consistent 500fps now
  6. Solly4568

    THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.

    • Wanted
    • Used or as new

    New or slightly used, don't really mind as long as it shoots straight and doesn't look too beat up

    £135

    Maidenhead, Berkshire - GB

  7. Solly4568
    While you have the gun apart, I recommend putting a tight bore inner barrel along with a maple leaf hop up rubber and nub in just to make it easier on you, as this will improve accuracy and allow you to lift even heavier bb’s, although mine happily lifts .4 with the standard hop up
  8. Solly4568

    Fixed the striker. 

    Had a heart attack on Sunday after the striker started slam firing, quickly bought an upgraded locking pin as I had read that slam firing can be caused by the combo of the old locking pin and new C.P.B.S. Got the pin fitted, it managed to get a shot off and all that came out the end was fragments of bb from my last shot, turns out the bb fragmenting had prevented the sears from engaging so the parts where useless (but shiny 😂) and would have needed to be replaced eventually. Still happy my baby is working again😁  

  9. Solly4568

    Moses wept. I just fitted the C.P.S.B bolt in the striker along with the spring that gave me 500fps in the old bolt but now the air seal is so good it is giving me 600fps. Oops. time to get a weaker spring🤣 

    1. Skara

      Skara

      ^

      Chronoed mine today, with a SP100 it gave me 99.5 m/s (measured with .20s) with a .06 m/s deviation in 20 shots.

      I call it a pretty good airseal for stock stuff bar the steel cylinder :P

  10. Solly4568
    make it sound like the foam finger from dead space 2, Bang pew pew
  11. Solly4568
    look what just came 😮
  12. Solly4568
    does anybody know if the shortened striker mags fit in m4 pouches
  13. Solly4568

    Good god I think I have found the best ad banner ever, it was for Russomilitare and the banner just cracked me up with a tank going off a big jump with fireworks going off all around it 🤣

  14. Solly4568
    C.P.S.B stainless bold for the Ares amoeba striker and lovely £20 scope of Amazon that has arrived and works like a charm currently eyeing up a stainless steel bolt pull handle to compleat the look 🤔
  15. Solly4568
    My beautiful two girls
  16. Solly4568
    O crap just realised I was looking at the American sight and that the English version (which I thought was 20 min away from me) doesn't carry the bolt 😭
  17. Solly4568
    not bad google Jedi😀 but if you take shipping into effect then it comes in cheaper to get the one from Redwolf
  18. Solly4568
    yeah but the one from airsoft pro ( that I could find) did not have the stainless steel bolt and only had the bolt internals
  19. Solly4568
    http://www.redwolfairsoft.com/redwolf/airsoft/Accessories_Conversion_Kits_Other_ARES_Compact_Power_Spring_Bolt_for_ARES_Amoeba_STRIKER_S1_Sniper_Rifle_Upgraded_Version.htm guys do you reckon that this is legit, they are selling the upgraded bolt for less than half price
  20. Solly4568
    sounds almost like your hop up bucking is not properly seated I would take it apart, reinstall the Autobot just to see if it is a seating issue
  21. Solly4568
    I know it sounds like a broken record but I would get a maple leaf bucking I have found that they are just the best for almost anything you are building and yeah I am not a fan of the decepticon either. but just for prosperity what range are you getting with the decepticon
  22. Solly4568
    Creating this thread to help people with their Ares Amoeba Striker problems and to discuss ways they have upgraded and changed their guns Have fun 😀
  23. Solly4568
    how dare it do that, its not like that's its job or anything 🤣
  24. Solly4568
    Titanfall 2 it is still my all-time favourite game and in my opinion is criminally underrated
  25. Solly4568
    Dear lord, I need to start mining Also an m140 spring for my Ares amoeba striker and a stainless steel spring guide for it as well
×
×
  • Create New...