Enid_Puceflange

Yes, those ones but note - they aren’t hinged!! so the possibility of snapping off is great! 😂 I use a couple of watch screwdrivers to tease them open a fraction then push the internals out

I did a woopsy Once you remove the base plate, open the tabs holding the magazine innards and push from the bottom it comes out easily after you have freed the grip the tabs have on it 👍

What are you wanting to take apart/remove ? I’ve dismantled all of mine the clean the follower & channel, removed valves to replace no issues. The bottom caps, I’d be leaving WELL alone unless they leak Once you have removed the baseplate and your spring has fired into orbit Let the follower slide out of its track and pop aside The actual gas reservoir is held into the mag case by two small tabs either side. have a close look , you need to gently prise them both outwards then apply pressure from the BOTTOM end to push it out Edited 👍

I recently changed my iPhone camera settings Changed from HEIF to JPEG which is “most compatible “ also smaller storage required not noticed any lost resolution maybe worth a shot 🤷🏻‍♂️

I simply cut the tabs off mine 😂

Recently found some love for M81 woodland and mixed it with some tiger stripe Also was unaware my mate and I were getting our pictures taken, or I’d have sucked it in a bit 😂

Thanks for that I understand the physics of joule creep, I maybe worded my original post badly, but I’m wondering why gbbr’s can hop a heavier bb than aeg’s can (without heavy upgrades to an aeg) make more sense?

Right, Something I have never understood, but have practical experience of Why do Gbbr’s work better with a heavier bb? If green gas or air compressed with a piston is coming out of a nozzle, then putting the bb through the hop up no matter what variant of replica (aeg or gbb) why does a gbbr prefer heavier weights Ive never understood the mechanics/physics involved 🤷🏻‍♂️ My gbbr’s both happily Chuck .36’s a nice flat trajectory (and send lighter weights into orbit with zero hop applied) My only aeg doesn’t really like above .28’s (with an upgraded rubber) Whats the story please?

Bloody hell Im not saying this isn’t a nice replica, but should it be featured in Mack’s? 😆

I had one, it was decent out of the box -standard Changed a couple of bits on it, wished I’d kept it but sold it for a Scar H Now that’s totally a forgettable MEH PewPew The Ak does make a nice “clack” when the fake bolt slides back and forward when fired 👌

Or an address to send him a postal order, but instead send him a party popper filled with shite

Not mine, but my buddy Made an horrific discovery on his Aps cam 870 😳

I believe the MK2 is gas in gun (if it was available) MK3 will be gas in shells Personally, from experience of using a cam870 , I’d be going for the MK3 Using standard Aps smart shells, performance will be a bit lacklustre as seen in the redwolf review. X-power shells with their extra gas capacity would be the way forward I would see 40+ meter range out of my Cam870 when using them, but the street sweeper has a gap between the drum and the barrel which will allow gas to escape, reducing range. So use the higher power shells https://youtu.be/Nm1lmSm38Rw?si=eS6QXmIPkTmCy1Tm

I never realised how good the muzzle brake and the torch had lined up in that picture 😂

Fitted a Romeo 8T I think it looks quite suitable

Bought a Holy Warrior Sig Romeo 8T clone for the Sig 553 Wasnt too impressed with the parallax before it was fitted and the reticle looked wonky. But having fitted it and looking at it down the replica it’s very nice. Nice trademarks, suits the rif 👌

Your now third in the queue 😂

Thanks lads 👍

Hey folks. what’s a sensible asking price for this bundle please? Two master mikes Two 40 mikes And a proper m203 launcher? One of the master mikes needs a valve

Im sure it would be, the base that holds the charges is far more substantially made than the Dynatex loading cap The insert is a steel tube that slips into the stainless base of the SF-DI But as it’d be getting rolled towards someone….. “Safety First” At least it consumed a couple of hours today, a nice distraction 😂

Yeah, yeah, yeah you have both sensibly talked me out of using it now 🫶🏼