Jump to content

Enid_Puceflange

Members
  • Posts

    2292
  • Joined

  • Days Won

    39
  • Feedback

    100%

Everything posted by Enid_Puceflange

  1. It’s how a lot of the police auction sites operate (johnpye) etc Its not a new idea, but certainly a pain in the ass if you are buying as Tackle mentioned, it just drags out the agony
  2. And a box of Cohiba Explendido I hope? ( just to light when the plan comes together)
  3. Should really be one of the selling rules Images must show what the buyer is paying for only
  4. This part could possibly be the culprit Try turning it 180 deg
  5. Are the code words ? “Gonna Geeza Can’o Ginger Pal”
  6. Does it have the clamp style fitting for the pic rail? The “female” side that the securing bolt goes through may be upside down, causing it to not sit properly on both the optics body and the pic rail Ive sorted that on a few of mine when they arrived, just by turning it 180deg to correct its locating
  7. Fcuk No! 😂
  8. There is low balling, then there is sub cretaceous 😂
  9. Been there with that seller… I was bursting to get a GHK sg553 a couple of years ago, and he had one Priced at not much less than retail I just couldn’t give him my money, but patience paid off I got the very gun he was selling then, a month later , from one of his “mates” at £150 cheaper
  10. Friendly banter buddy 👍 Good luck with the sale
  11. You certainly ain’t gonna make many friends in here if you carry this malarkey on 😂👍
  12. Dm’d
  13. Ask Andre 😂
  14. So, I got pee’d off with the fact that I couldn’t figure it out, so off to Kingdom Of Airsoft it went…. A few things amounted to the problems I was experiencing It looks like I forgot to put back in the small washer/spacer that sits on top of the pinion gear, causing a bit of chewing So replacement gears fitted Tappet plate was apparently gubbed too, so replaced Previous owner had fitted Deans connection, and the solder was “questionable” But probably, the real main cause of my issue was down to me…. The battery wires come along, under the buffer tube, and there is very little space and a finnikety job to get them in under the castle nut Looks like I may have damaged the insulation, causing it to contact something metal 🤦🏻‍♂️ Its been away almost two months, and making its way back soon, in time for some winter use 🤞
  15. I’d be checking eBay for similar items dude if your struggling to ping a price on here with it (though some eBay sellers are EXPENSIVE) so use your finest judgment from there 😂
  16. People’s expectations differ, personally, I always expect to be disappointed - So what’s this RIF’s FPS, range and preferred bb weight please
  17. Don’t be annoyed Dude, Mixing camo’s is a vibe man, I never wear matching top & troos 👌
  18. You do whatever is most comfortable for you bud! I think the clips on the bottom front of your plate carrier are probably for a dangler pouch, to carry more stuff in (and a bit of tummy protection) I used to use one of those belts, to hold a dump pouch and an extra mag pouch or two, but wore it with the buckle to the front with a harness to support it over my shoulders. I’ve moved over to one of the two part belts, and have found it far nicer to have moved a bit of weight to my hips, (they are very rigid and have little to no “sagging” or drop when you fit them properly) and not my upper where the weight is supported by my shoulders and then my back, allowing me to lighten my PC a touch (helping reduce back pain)
  19. That’ll work perfectly Dont worry about the rear point being underneath, and the front one being at the 9 o’clock position, it’ll hang off your shoulder just fine, and when firing it’ll be just right. 👌
  20. DM’d to take all 3
  21. I’d love to know how you cram 17 beebs into an APS shell? 😯
  22. Depends on what you class as expensive? Maybe £30 on a R/S qc sling point, vs the possible damage and repairs that could possibly result in a replica hitting the ground. Personally, I prefer a loop style sling point and use an HK style attachment Just as fast, and I trust it more to support the £100 (how much I told my mrs it cost) gbbr replicas 😉🤫
  23. Fook me…. The steel model is almost 3 kilos heavier than the ally job! 😳
×
×
  • Create New...