[North East STEN SOE Welsilencer Version]

Cheers RDB, much appreciated. 👍 

[North East STEN SOE Welsilencer Version]

Afternoon all, have a like new, North East STEN SOE Welsilencer version that I may be looking to part with, not a mark on it apart from a small mark on the bolt carrier, boxed with all documentation.

 

What's the going price on one of these now that they are discontinued?

 

Cheers in advance!

[Any knife guys out there?]

Much obliged gents, will look into it.

[Any knife guys out there?]

Evening, just wondering if there are any knife guys kicking about?

 

Got an old Al Mar SERE Attack 3003A that I'm wanting to get a rough value on and part with, but wouldn't have a clue who to go to or where.

 

In good condition with a few small marks here and there, never been sharpened to my knowledge. Its the rarer version with 'De Oppresso Liber' marked on the handle.

 

I'll include some pics below if that helps.

 

Thanks in advance!

 

 

[Help required regarding magwell compatibility with Guarder Glock 19 gen 3 frames]

Evening all, hope the night finds you well.

 

Looking for some help and advice before I shell out a small fortune on parts that probably won't fit knowing my luck.

 

I have a Marui Glock 19 Gen 3 model with a Guarder frame fitted and I'm wanting to fit either a genuine Magpul GL gen 3 magwell or one of the C&C Tac Taran Tactical style ones. C&C has one version for Marui spec Glock 19 gen 3 models AND one for VFC gen 3 models.

 

It's my understanding that the dimensions of the Guarder frame differ slightly from the original Marui frame, so I'm unsure as to whether its close enough for real steel for the Magpul GL to fit, or if its closer to Marui/VFC original spec for one of the others to fit.

 

Has anyone had any experience with any of the 3 in conjunction with the Guarder Glock 19 frame, and if so did they fit or was modification required?

 

I did stumble upon a page whilst googling the subject that the chap stated he had successfully fitted a Magpul GL Glock 17 magwell to his Guarder framed Glock 17 with no modification, however he had to use Guarder base plates to get the mags to seat correctly (not that that is an issue as I already use them), However I'm unsure if the same is true for the 19.

 

Even if someone could confirm they've fitted any Marui or VFC magwell to a Guarder 19 frame that would be a step in the right direction.

 

Have added a picture of the low profile Taran Tactical one I'm after for reference.

 

Cheers in advance!

 

 

[Gun picture thread]

19 hours ago, Wavey_Gravey said:

“Finished” with the Troy now thanks to @BADGERF1STfor the KAG!

 

 

Secret squirrel rattler or LMT specwar next on the list, basic bitch M4 is also tempting.

 

Looking good buddy, glad it arrived ok! 

[SCAMMER strikes again.... STEVE GLENNIE]

1 hour ago, Rogerborg said:

Most likely outcome is that you pay postage, and he pays nothing.

 

I suppose you're probably correct on that one buddy, although I'd be willing to swallow the cost if I could see the look on his face...

 

1 hour ago, JimFromHorsham said:

Get some old dead batteries and tape them together  or nice smooth pebbles taped together  and put them in a jiffy , write his name on it and pop it in a post box with a single first class stamp attached , he’ll get a card asking to pay the postage difference and I guarantee he’ll do it because curiosity will get the better of him . 

 

Now this idea I like, well played Jim! Although it would have to be 2nd class stamps of course, just to maximise the financial impact of course 🤣

[SCAMMER strikes again.... STEVE GLENNIE]

Righto lads, sorry to drag this up again, but this absolute scrote is still at it, just had him hassling me on AirsoftHub again under the same username as before, Chris001, and he's made an appearance on ZeroIn as well under the username [email protected].

 

Again, only interested in swaps, this time he's offering a lovely 'PX4 with upgraded slide, barrel and extra mag'.

 

Now, to my knowledge, he doesn't know that I know who he is, and the only reason I rumbled his ZeroIn account is that he mentioned he'd spoken to me on AirsoftHub a while ago, so how shall we play this one?

 

Agree to the swap and send a big 'ol box of shit?  

 

Get his address and see if anyone in the local area is willing to meet him face to face?

 

Arsehole needs some form of comeuppance and I do fancy myself as an agent of Karma.

 

Applications on a postcard please, everything considered 🤣

[SCAMMER strikes again.... STEVE GLENNIE]

Yeah, unfortunately he just seems to keep crawling back, how can the feds keep just letting him get away with it? I'm sure the OP isn't the only person to have reported him to the authorities, and yet here he is again.

 

Nice to see our tax monies hard at work as always.

[SCAMMER strikes again.... STEVE GLENNIE]

For what its worth and if it saves anyone else getting bitten by this arse hat, he's still about on Airsoft Hub under the same username, Chris001.

 

Had a message from him asking if I would entertain swaps on my Marui MEU, good communication to start but funnily enough he never replied after I said I'm only interested in selling.

 

Only just put two and two together and realised it must be the same person.

[Barely used VFC SCAR H GBBR In Black With Accessories]

Afternoon all, looking for an appraisal for the above as UK prices seem to jump from £350 to £500 for the base gun, depending on retailer and no one has one in stock that I can find UK based anyway.

 

Its a bog standard, barely used VFC SCAR H GBBR in black, I'm the only owner since new and the only wear and tear on this is on the side and bottom rails, otherwise it's mint. Only had about 2 magazines through it and it's never been skirmished. 

Fitted with an Angry Gun ACR stock with metal stock adapter, replica 1x - 4x Elcan Specter DR, Element LA-5 UHP (green laser version), Genuine Magpul MIAD 1.1 grip, Tango Down style vert grip, Air Force One Atlas bipod replica, Element M3X flash light, quick release AAC style suppressor and 51T flash hider, Element SCAR rail covers and original flash hider with a steel VFC full length barrel extension.

 

Includes one gas tight magazine.

 

Thanks in advance for the help,

 

Callum.

 

[THE TM MWS thread]

4 hours ago, werkzeug said:

Thinking about buying a PDW stock but I’m not sure if this will fit to the MWS.

 

https://www.wingtactical.com/firearm-parts/ar-15-parts/stocks-accessories/strike-industries-pdw-stock/
 

It seems to be a practical stock, not cheap but pretty solid from the videos I’ve seen in YouTube. Sold in the US though, not sure if it’s possible to export it to the UK.

 

G&P make that exact stock specifically for the MWS platform.

Doesn't appear to be in stock in the UK, but Google 'G&P Viper PDW stock' and plenty of results will come up in and around Hong Kong, but then if you're willing to try and ship genuine firearm parts from the states (Something that most US companies WON'T do due to regulations, apart from Brownells as mentioned above), then it'll be much cheaper and easier to get one shipped in from MLE Mart or somewhere similar.

 

Also regarding Brownells, I've used them repeatedly in the past with no issues, however I ordered an Ergo grip from them almost 2 weeks ago, in stock and ready to ship from the states as they drop ship UK orders in, and its not even been shipped yet, last update was 'Viewed' and that was the day I placed the order. No response to emails either.

 

Hopefully that helps save you some cash and some of the headache.

 

All the best.

[THE TM MWS thread]

Afternoon all. Hoping someone can shed a little light on buffer tube compatibility.

 

Basically, I have a standard MWS receiver and I'm looking to fit the HAO Colt Canada tube as part of my L119A2 build and I've been informed that the HAO version is real spec threading. 

I've read some articles stating that the MWS receiver is close enough to milspec that real steel tubes will mostly fit with no work, but I've also read that people have had to re-thread the receiver to fit real spec tubes.

 

Basically looking to see if anyone has actually tried to fit the HAO Colt Canada tube to a standard MWS receiver, and if so, how did it work out? 

 

Thanks in advance.

[Post here to have your feedback score migrated to the new feedback system]

And two for me please!

 

[Feedback migrated - 02/08/18]