Caj109

Haha he found one around for me at 380mm length! I'll get it a go once I can put it in the gun

Always a pleasure ordering from here, never had any issues. Ordered one of his new XT 6.02 Inner barrels and a maple leaf 60 bucking & nub.

Bought a new XT inner barrel and maple leaf 60 bucking and nub from our friend @ak2m4

Okay sounds good, if you have any 380mm or 363mm laying around, happy to try it out. Or if best wait for your 6.03 ones to come about if 6.01 jam more often, suppose an unknown if they will on my gun. As planning on ordering the spring and bucking set when you're back open. yeah my specna arms edge sa-e03 is still standard gearbox wise no changes there as only planning on doing the inner barrel while got apart to change the bucking and nub. Cheers

That is understandable if the quality has dropped to not stock them, oh no that's a shame its broken your new bore scope! Hopefully a replaceable part. Yeah I have been following slightly as getting back into airsoft regarding your new inner barrels, and recall you waiting for them to come across and that. Is there much difference between the 6.01 & 6.03 like performance? If you have that would be perfect as looking to get a maple leaf 60 bucking and the nub set from yourself too. No harm in waiting for the 6.03 if best. Was gonna ask you too I bought a rocket 105 spring probably 2020 as last played then, would you suggest replacing it as been at tension all them years? I did fire some 0.25g bbs from it and getting 0.9joules from it after getting it back down from the loft. As looking to go to 0.28g bbs and thinking about going for a 100 spring but need to check the joules out with the current spring at 0.28g first to see where its sitting. Thanks

Would anyone know if airsoft websites are getting the ctm aap-01 holster back in stock? Seems tk be out of stock everywhere. Unless they've replaced it with the galaxy one now?

Thanks, have been meaning to ask if you're getting ZCI inner barrels back in stock? As planning on making an order for bits. Thanks

Nope just wasn't sure if the length is essential, but makes sense to keep the same length. Thanks I'll try get hold of a 380mm barrel

Hello, Just took my hop unit and inner barrel out to measure as different lengths on Google for my gun. Seems its measuring about 380mm. As im looking to upgrade the barrel as gonna change the bucking too, Should I keep the same length or go for 363mm? Seems the current inner barrel reaches to the end of the outer barrel then it has a flash hider on the end currently. Gun is an Specna Arms SA-E03 Thanks

Needed a gas block to replace my front iron sights, got this from airsoft world.net and they gave me a free patch and a bounty! Thankfully I don't mind a bounty, controversial topic 😂

Thanks very much both, if no issues with using it then. I'll give it a light coat of silicone oil to avoid damaging it when putting back together. Cheers

Hello, In due time once everyone's back from Christmas break I'm gonna order a maple leaf macaron 60 bucking and nub for my M4. but from googling and videos people seem to put silicone oil on the outside of the bucking to aid the hop unit to move over it? Or should I totally avoid any chemicals on the rubber and leave dry? Thanks

I know this is an old thread just thought to put my input. I have two 7.24 lipos that have been in storage mode for the past 2-3 years from when I played last using the skyrc charger. Plugged them in recently and still reading 3.81v per cell on both batteries, charged and discharged fine ready for airsoft next year. My understanding storage mode puts the cells to 3.85v No bulging in them either, just stayed within a lipo safe bag.

Little cheap red dot sight for the M4.

Thanks very much for that as I've actually ordered it to give it a go! Perfect if good for an M4 as what's I run myself and in woodland so a good one to get. Much appreciated