xaphor
-
Posts
93 -
Joined
-
Last visited
-
Feedback
0%
Content Type
Profiles
Forums
Buy a Patch
Classifieds
Everything posted by xaphor
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Seen some on amazon but thought I'd see what's about on here, please pm me what you have£35
-
If you're going HPA and going "As simple as possible" why not go Kythera? Just runs off air with no battery! Could be worth looking at
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
I know someone will have one somewhere, in some bin or in the back of someones cupboard. I need one with atleast 25mm wide space internally (ID)£10
-
Hi All, Please see the video below, I've got a perun v2 installed. I thought a new selector with less play in would resolve the issue but it seems to be exactly the same thing The more I tweak it the weirder it gets, I was hoping the Perun + the selector would have resolved this issue. Cyma gearbox, Src upper and lower UPDATE: Resolved, I moved the sticker back a little! Issue resolved! VID_20230125_204048.mp4
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Recently got the gun, would like to mount my sights properly Please pm me if you have oneNO VALUE SPECIFIED
-
-
Try all Arms airsoft! Based in Rishton, Blackburn. (30 mins from you) Do rental's there and see how you find the game! Best of luck!
-
This advert is COMPLETED!
- Wanted
- Used
Standard mp5 mags for JG/TM MP5, will take mids or highNO VALUE SPECIFIED
-
You can message patrolbase to order in kit from TG but be warned, they're ditsy as hell and will most likely put whatever you've ordered on the site and sell it. Then email asking if you bought it. Keep an eye on ebay, that's where I snagged my rig from!
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Slowly collected over time, a mix of Hi capa, Glock and a 1911 slide 1 plastic hi capa slide (Xtreme slide) 2 aluminium hi capa slides (very rough looking inside and out) 2 Glock frames (badly stippled, not by me!) 1 metal 1911 slide (could be BELL) 1 hi capa bbu and shortstroke rings (BBU could be boneyard, untested) Part of a 1911 mag (no top of bottom just middle) 3 hi capa inner barrels (2 silver metal, black is plastic) 1 Glock inner (metal) unsure of brand 1 spring plug thingy magigy ( hi capa part) 1 complete and unopened Hi capa piston head set (Guarder) Some random 3d printed ring What you see is what you get ( minus the table it's on) I'd rather post it all off in one bag and get the sale done but would be willing to split stuff off for the right price! Useful stuff for someone who likes to tinker with stuff. Any questions/further pictures needed please ask!£80
- GB
-
I'm in the middle of doing this exact thing, I've picked up an SRC polymer body, I'm going for CF Stock and outer barrel, I'm in the middle of piecing it together but the predicted weight I'm going for is just over 1kg. V2 gearbox's are extremely universal, I'm putting a Cyma one in my SRC body
-
TM Glock Slide Metal 1911 slide 2 off brand hi capa slides (alot of worn paint) Metal Glock outer barrel 1 stippled Glock lower 1 badly stippled Glock lower Black TM outer barrel TM extreme slide 2 random 1911 BBU's A bell 1911 with TM slide, after market BBU and gold slide catch (terrible on gas) like all 1911's! KJW MK1 with standard stock and 3D Printed stock for silencer (never skirmished)
-
Pulled a metal slide out of the boneyard.. issue resolved! Thankyou, I think back then when I first got it, I was trying to make it as gas efficient as possible and tried to kit it out with a TM slide, probably a little too flexible for it! PXL_20220731_112055242.mp4
-
My bad, I've updated it now green gas and polymer slide
-
Ever seen a Glock pop?! Green gas, Polymer slide. unsure of the brand but looks like a TM clone, might be AA if I remember.. had for ages and recently developed this problem. Highly amusing but not useful! Any suggestions would be useful! PXL_20220616_183633234(0).mp4
-
This advert is COMPLETED!
- Wanted
- Used
Looking for an M4 buffer tube and stock (as cheap as) (Not bothered on brand) Possibly an AK 47 lower and upper (Basically got a v3 gearbox and nothing else for it!) If someone has an adjustable 20mm raiser too that would be awesome too, I'd rather buy on here off someone than chinaNO VALUE SPECIFIED
-
I bought this TM ages ago, extremely cheap. When I'm shooting the pistol I have to let go of the trigger for it get into a place where it can shoot again. I can't apply any pressure to it if not then I cannot shoot until I let go of it.. Video below PXL_20220618_143525590(0).mp4
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
I did a dumb dumb and I can't remember if I either sold the mags or I've lost them.. But I now own an M4 with one mag. Either looking for mids/highs/flash mags. I know some of you will have some kicking around somewhere!£5
-
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
Looking for standard AEG pistol grips, cheap. Nothing fancy for a project. Black preferred X 2, someone will have some in a parts bin! PM me if you have someNO VALUE SPECIFIED
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- Wanted
- Used
I've had this sat around a while, picked it up years ago for £15, has anyone got any boneyard parts to complete this? A completely new receiver would be nice + the rest if possible! Pm me what you've got and how much you want posted Looks either to be a JG or a cymaNO VALUE SPECIFIED
-
I thought I was tech savvy but.. how do I edit adverts on here? I want to do a price drop
-
Click on 'Advert Actions' at the bottom of the advert
-
- xaphor and sonofsammo
-
2
-
-
-
THIS ADVERT IS 'UNCOMPLETED' - THIS MEANS THE ADVERTISER HASN'T BUMPED THIS LISTING, BUT IT COULD STILL BE WORTH CONTACTING THEM.
- For sale
- Used
Selling my unreliable bell 1911, had this years and never really used it. It comes with 3 leaking mags and 3 air tight, (Mix of TM, KJW and Bell Mags) Mostly TM Has a light weight BBU fitted + TM slide too Please note these are either very bad on gas or I'm doing something wrong.. Its been a burden for years to me and as much as I think its a beautiful gun.. Its just sad to look at. £90 ONO£70
, Lancashire
-
How many pistols do you all have? I need to work out if I've got an obsession..
-
3, technically 4 if you count the crappy broken usp that doesn't work.
next on the list is a makarov, then maybe a mauser 1896 to replace the luger that's not that good, then probably either a proper usp or a cz75, then maybe a px4, then i might finally sell my soul to glock, but not after i own every hammer fired wonder 9 on the market, it's at this point i should probably add a deagle for the lolz then by that stage i realise i should probably have spent that money on some rifles/smg's because i mostly game outdoors and rarely draw a pistol.
-
-
-
http://www.sendshit.co.uk/ You know what to do
