Jump to content

Shootinputin_187

Members
  • Posts

    16
  • Joined

  • Last visited

  • Feedback

    100%

Recent Profile Visitors

2,873 profile views

Shootinputin_187's Achievements

  1. This advert is COMPLETED!

    • For sale
    • As new

    Same as the MCX previously listed, this MK18 has been recently upgraded and serviced by Sam Liggat (KOA) and is fully functional. ROF is around 40 RPS on a 11.1V 2600mah battery (not included). Feeds flawlessly from EPM mags. Minimal cosmetic damage from light use - built from a Licensed Daniel Defence MK18 Mod 3 shell. Selling because my local field is starting to place restrictions on high RPS guns. Build list as follows: Internals: Warhead brushless motor Jefftron Leviathan Mosfet Retro Arms Gearbox MAXX Hop unit 4UAD bucking (I think) EDGI 6.01 229mm barrel 8mm EZO bearings DSG gearset Externals PTS EPM stock ANGRYGUN Surefire RC2 suppressor PTS Pistol Grip Accessories: 9x Black EPMs with Ranger Plates installed Asking Price: GBP 800 + GBP 15 per mag (Buyer pays for postage and paypal fees).

    £800

  2. This advert is COMPLETED!

    • For sale or swap
    • Used

    MCX has been recently upgraded and serviced by Sam Liggat (KOA) and is fully functional. ROF is around 40 RPS on a 11.1V 1300mah battery (not included). Feeds flawlessly from EPM mags. This has been a real workhorse in my arsenal and carries cosmetic damage from use. Selling because my local field is starting to place restrictions on high RPS guns. Build list as follows: Internals: Warhead brushless motor Gate Titan I MOSFET Retro Arms VFC Gearbox MAXX Hop unit Maple Leaf Macaron bucking XT stainless steel inner barrel 200mm 8mm EZO bearings Custom Helical DSG gearset Externals Airsoft Artisan Folding Stock base Marui PEQ Box battery case ANGRYGUN Tornado suppressor with Blaster M tracer unit PTS Vertical Grip Genuine MFT Minimalist stock PTS Pistol Grip Laylax MCX outer barrel support bracket Accessories: 7x Tan EPMs with Ranger Plates installed 2x Black EPMs with Ranger Plates installed Asking Price: GBP 750 + GBP 15 per mag (Buyer pays for postage and paypal fees).

    £750

    , Please select region, state or province - GB

  3. This advert is COMPLETED!

    • For sale
    • As new

    For sale is a PTS Masada DSG built by Sam Liggat of KoA fame. Internal build: Retro Arms Gearbox for PTS Masada machined by Sam to accomodate Jefftron Leviathan CYMA white piston FPS softair piston FPS softair Tappet plate Prometheus steel cylinder Warhead Ronin 30k Prommy purple rubber SHS gears Upgraded hop chamber External build Acetech bifrost Custom cut 8inch outer barrel Distressed red cerakote Sale will not include the WML or the red dot Gun is shooting 330fps on .2 and tailored for CQB. Feeds from standard m4 Epm mags. Shoots 35rps on a 7.4v battery - 11.1v not recommended by Sam due to quirks with the leviathan algorithm and the PTS masada being different to an M4.

    £550

  4. This advert is COMPLETED!

    • For sale
    • Used

    WTS: HAO 416D with Geissele SMR Condition: Used The RIF has been skirmished on several occasions with some cosmetic damage. Otherwise in working order Externals • HAO Steel Barrel and Flash Hider that came with the kit will be included separately (lightweight barrel kit currently installed) • Genuine Streamlight Protac HL-X with Cloud Defensive cable management system • Replica Arisaka offset mount for SMR • Genuine Magpul RVG (missing one bolt) • Genuine Black CTR stock • Replica AAC flash hider Internals Internals • HAO 416 bolt x2 (one installed and one spare chassis) • Angrygun Hop adjuster • R.I.W. Trigger box • Spare Laylax Hop Unit (Stock hop installed) • Stock Barrel with Modify Tan bucking Listing does not include original parts or the optics that the 416 is currently pictured with Price: £1,100 (Will include shipping within the UK)

    £1,099.99

    London - GB

  5. Heres my PTS Masada DSG with a distressed red cerakote finish. Has a real EXPS 3 and a dummy peq box for battery. Wires from peq box are routed through the hole where the front sight sits and connected to the BTC Chimera in the handguard. Barrel is cut down from the standard 11.5" CQB length so as to accommodate an acetech lighter bt while keeping overall barrel length at 10.5". Took the better part of 6 months to source all the required parts and the poor internal design of the masada made the process all the more challenging but glad it worked out in the end.
  6. Dear all, Just got a VFC HK417 GBBR on order, waiting for my UKARA registration to clear. Would like to ask what upgrades I should consider to improve its characteristics; am particularly concerned with making it as accurate as possible for a GBB. Cheers!
  7. Really appreciate the honesty. Would you know of any establishments that do good custom work?
  8. HI all! Am new to airsoft and in the process of acquiring my first gun. Would be really glad to get some feedback and advice on this project I'm thinking of undertaking. I'm trying to achieve a look similar to the rifle below (a SAR-21): My current plan is to start off with a stock TM Steyr AUG HC (pictured below) Step 1: Replace the stock barrel with a longer version Step 2: Remove the lower rail and vertical grip that comes with the stock Step 3: Install a RIS handguard on the longer barrel Step 4: Install a longer vertical grip on the RIS handguard I have given some thought to using a Steyr Aug A1 from TM or a Umarex TAR 21 as the base but have rejected them because the AUG A1's scope mount is too distinctive and is not removable, and the TAR's handguard doesn't seem to be replaceable. Do let me know your opinions and input on what else I can/should consider! Thanks very much for helping out a newbie!
×
×
  • Create New...