All Activity
- Past hour
-
Chronoing gas shotguns is both easy and hard, depending on the kit on hand. As you've found, most site chronos struggle - the gas can upset them, as can multiple BBs going through the gates, which is how you end up with mad 5J readings. Lots of places will tell you to just load one BB and fire that, which is inaccurate the other way and often leads to lower readings (lots of gas will just escape out of the other barrels). The only way to do it really accurately is to use radar chronos (https://airsoftdirect.uk.com/product/valken-airsoft-chronograph-custom-chrono-x-radar/) but they're not especially common. FWIW if I chrono at home with multiple BBs, I often get 3J+ readings. If I chrono with one BB, it will usually show around 0.7J but if I chrono on a radar with three BBs it's around 1J.
-
Lozart reacted to a post in a topic:
Chronoing Gas Shotguns
-
Based on general experience, the gearbox from the people that made the gun should have a better chance of fitting directly and working properly - but there are no guarantees. The other thing I've found is that some V2 boxes in G3/G36/MP5 are subtly different than a standard V2 box (selector plate for one) so just check that before you drop coin on one.
-
The majority of the sites I’ve used a shotgun at have asked to load one bb into a few shells and chrono that way, not sure if that’s the norm but to me it’s the most logical
-
Hi All, Tried to search but couldn't find a topic on this Recently picked up a Gas M870 shortie that shoots in either 3 or 6 shots When I chronoed at home was putting out 5J on green gas on 3 shot - I've tried then to chronological with just 1 bb which was still showing 2.5j until I moved slightly further back (2-3inches - oooh errrr) from the chrono - then was getting 1J. I assume this was the unspent gas also exiting the muzzle and entering the chrono - skewing the data. My question: How do most sites chrono shotguns on the day? Want to try out my new toy - but dont want to be hit with a silly 20m MED because the chrono isn't reading right Cheers!
-
Time Left: 6 days and 23 hours
- For sale
- Used
Maruyama scw9 (apc9) fully working and upgraded. 6.01mm barrel, flamingo hop rubber, all internals have been polished to have a smoother action. Original outer barrel, new outer barrel with -14mm thread, spare back plate with 1913 piece for different stocks. Magpul k2+ grip, cut down foregrip. 3d printed suppressor. 4 long mags, 1 short mag, all gas tight and feed and stop on last round. Gun is fantastic, has really decent range for how compact it is. Also have a spare hop unit that I can throw in. £500 all in posted, torch and unity mount not included. the only trades I would want is a salvo mcx, lt or rattler. Any questions just ask£500
-
Time Left: 6 days and 23 hours
- For sale
- Used
Hey For sale is my custome built L119A1 off of a classic army m4 cqbr Has an inferno gen 2 engine installed Gate eon hop unit with maple leafe rubber and omaga nub Tight bore barral is unknown Copy surefire 556 can Old school kac grip and car 15 stock with rubber pad M300 tourch with pressure pad Aimpoint Painted up in old school early 2000's afghan paint scheme. Looking for around £500£500
High Wycombe, Buckinghamshire - GB
- Today
-
Time Left: 6 days and 22 hours
- For sale
- As new
Hey For sale is my gj G3k with backdaft phynix engine Has full auto and semi auto Comes with red dot Shoots nice and has a decent rate of fire Comes with 2 hicap mags Looking for around £250£250
-
I bought a used LCT G3 a few weeks ago with a plan to build it into a DMR. I don’t know a lot about the history or age of the gun, it doesn’t have a MOSFET or quick change spring. Original idea was to send it off to have it built into a 450fps semi only DMR with a few choice upgrades but I’ve come across a few V2 gearboxes (one made by LCT) with a MOSFET and quick change spring already part of the package. Will these just drop straight into the gun or need additional work to make them work? The LCT version looks like the upgraded version of what’s already in the gun so should be fairly easy to swap over but I’ve also seen the Cyma platinum complete gearboxes. I have two Cyma Platinum MP5’s and they shoot incredibly well for what they are. Both gearboxes are under £130 which seems like a cost effective option and basis for a good DMR build if it’s “that easy”. Interested in the MOSFET so I can program it to semi only and the quick change spring will allow me to tune the power and easily return it to a sub 350fps gun should I want / need to run as a full auto rifle in the future.
-
Time Left: 6 days and 22 hours
- For sale
- Used
In great condition only used for one game. Comes with 2 perfect leak free mags.£120
- GB
-
Likewise. I think they were the first company that I bought batteries from online. I have had one duff battery from them; they sent a replacement the same day I reported it to them and did not ask for the duff one to be returned.
-
brooh joined the community -
Another vote for component shop. I've used them for years and are usually my first stop when looking for anything battery related
-
Time Left: 6 days and 16 hours
- For sale or swap
- Used
Fully Licensed VFC Avalon Gearbox - rewired to Dean's and blade connecters for easier disassembly. Quick Change Spring This Airsoft Electric Gun is built to a stunning standard under full license from Sig Sauer, made by VFC with the Avalon Gearbox. Not only do you get a rock solid exterior, but a quick change spring system, steel tooth piston and rotary HOP Unit are a short list of what awaits inside. RRP £589 - https://www.davescustomairsoft.co.uk/sig-air-vfc-sig-mcx-virtus-aeg-black Prefered sell sites - Manchester - F&O TOP SECRET Newcastle - No LIMITS AIRSOFT. Reluctant to post but can arranged at buyer's cost.£320
- GB
-
Time Left: 6 days and 14 hours
- For sale
- As new
TM M&P9 V custom - Added custom trigger the trigger wall can be adjusted for quick shots, added guarder stippled grip and the original grips in box are included. Never fielded - only used for display. Magazine is gas tight and gun has been lubed ready to go. Can ship using Paypal G&S, buyer pays shipping. Can also collect. Thanks£120
-
Time Left: 6 days and 14 hours
- For sale
- Used
TM M45A1 Tan - Has upgraded springs and added on a magwell. I have added some Tamiya weathering effect to the front of the slide and barrel to make it look more realistic - I wall hang these so I wanted a cool effect - this can be easily removed. Never fielded - only used for display. Magazine is gas tight and gun has been lubed ready to go. Can ship using Paypal G&S, buyer pays shipping. Can also collect. Thanks£120
-
Time Left: 6 days and 13 hours
- Wanted
- Used or as new
Looking for 2 in good condition. Ones that take .209 primers. Not interested in ones that are battered or spray painted. Preferably to come with a plunger tool and pin. If you got one on sale, let me know.£123
Reading
-
Time Left: 6 days and 13 hours
- For sale
- Used
TM G17 Gen 5 MOS - Used as display piece on wall and never fielded - fired a few times in garden and magazine is gas tight. Gun has been lubed and ready to go. No marks or scratches as I collect these for show. Selling due to house renovations I will have other pieces of my collections up for sale soon please enquire (all Tokyo marui with some customisations and in great condition - never fielded) Comes with: Original box Extra genuine marui slide (with original sights), barrel and recoil spring Acro red dot and acro plate (attached on gun) Detonator aluminum threaded barrel TTI magwell Rear beaver tail grip Steel Raised sights I picked up the spare slide and bits just incase I wanted to create another spare slide with a different red dot or keep it without - never got round to it. The extra slide does not has an inner barrel or BBU it is just the slide, recoil spring, barrel and sights Can ship using Paypal G&S, buyer pays shipping. Can also collect. Thanks£280
- Yesterday
-
50rd as a STANAG can only be Golden Eagle. -
If you post more pictures of the top and the valve at the back, people can ID these for you bud
-
Patrol Base have the V2 in stock. -
Colin Allen reacted to a post in a topic:
Best place to buy batteries?
-
Time Left: 6 days and 11 hours
- For sale
- Used
unsure of brand 50 round GBBR m4 magazine 3 of them have a leak and 1 works perfectly fine will do £80 for the 3 leaky ones or £100 for all of them£100
-
Time Left: 6 days and 11 hours
- Wanted
- Used or as new
I'm in desperate need of an APS UAR gen 2 or 501x please let me know cash waiting£100
- GB
-
Tackle reacted to a post in a topic:
Best place to buy batteries?
-
Tackle reacted to a post in a topic:
Macks airsoft dreamers of the week thread
-
Cheers, quite a bit of choice and the prices are reasonable 👍
-
RostokMcSpoons reacted to a post in a topic:
Best place to buy batteries?
-
I have been listening to the two albums by Pelegrin today. They are a “soft doom” band with North African/Spanish overtones. This is the title track from their first album.
-
Sevensixtwo45 joined the community -
Time Left: 6 days and 10 hours
- For sale
- Used
Genuine Safariland Glock 17 leather holster, in good condition Postage is £5£35
- GB
