All Activity
- Past hour
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
2025 pit viper about 5 month old 2 mags more on my adds 07478 285815150.00 GBP
- GB
-
Was just about to say this. I've used propane from day 1 of my first rif 15 years ago and never ever used silicone in the gas, not once had a issue with any guns. My we l85 has never had new seals in the nozzle or mags and it seals and runs beautifully. So I have always felt silicone in the gas is a myth that it's needed. But that's only my personal experience.
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Assorted Weapon Parts, will discount for bulk purchase. Price as listed or ONO: 1. Cyma AK 2500rd Drum Mag - £25 2. E&L Buffer Tube - £5 3. Theta Optics Elcan Sight 1-4x - £10 4. AK Dust Cover - £3 5. E&L AK Receiver - £5 6. AK Stock - £5 7. E&L AK Gas Tube - £5 8. Tokyo Marui Rear Sight - £5 9. Zenit Rugged Grip - £5 10. E&L Hop Unit w/ Maple leaf rubber and 6.03mm barrel - £5 11. Haley Strategic (Real-steel) Canted surefire mount - £30 12. Tokyo Marui M4 Pistol Grip - £5 13. E&L AK105 Flash Hider - £5 14. E&L AK105 Rail System - £10 15. Zenit replica rail system - £10 16. Magpul AFG (Real-steel) - £20 17. Aftermarket AK Flashhider - £5 18. Off-brand stock - £5 19. E&L AK105 Stock - £5 20. Zenit Short grip - £10 21. E&L AK105 Barrel - £5 22. Aftermarket AK Flashhider - £5 23. Tokyo Marui M4 Sopmod Stock - £10 24. Aftermarket AK Flashhider - £5 25. E&L Mag spacer - £5 26. E&L AK Gearbox, 13:1 gearset, high torque motor, aftermarket nozzle - £10Ask for price
Hertford - GB
-
Cooperman26 reacted to a post in a topic:
New to A Soft
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Ive had it for a while but only been to 3-4 game days with it. NO SEPERATING VFC V3 GREY MAGS X 6 (3 new V3.5) Artisan stock adapter + Real CTR Ireg def Special K Grip Artisan SD Handguard OGL Modlight BPW - SLX 556 Die free co Kung Fu Grip Wing Light mount Holy warrior LVPO + Repo Acro P2 + Evolution gear scope mount (Not included, Price Adjusted) JWC CNC Hop 4UAD Hop rubber GSI Hop arm Stock Npas Unicorn inner barrel BV Spring buffer inside and 1 spring and rubber buffer also included. Winter springs inside and normal springs with be included. 3inch outer barrel extension VFC 3D Printed speed loader adapter Lower receiver does have engravings Has some exterior damage in areas Second Pic is in front of the XTN which will be covered by the light mount £700 Or Trade For a GBBR Dmr/7.62 Collection London or postage with parcel force £15700.00 GBP
-
Alparker94 joined the community -
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Looking for any brand of m16a4 quad rail handguardAsk for price
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
Looking for any brand of m16a4 quad rail handguardAsk for price
-
Evening Don't suppose anyone has slapped one of these into your generally available brand AKs (CYMA, G&G, TM, E&L etc) Thinking about replacing the default cast G&G hop in my GKM. Worst case will just buy one and see for myself, but thought there might be some xp floating about - I can't be the only one fed up with the crappy little slide. https://www.patrolbase.co.uk/lct-rotary-hop-unit-for-ak-aeg?srsltid=AfmBOormEOVAtsd9Ni3W6kY6g8j776qtSpe6crPiKamhbHW4BqHma4wm
-
What have you just 3d printed (for airsoft)
BigStew replied to sp00n's topic in Guns, Gear & Loadouts
Impressive work. -
BigStew reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
Hi Bill, Do you still have the mag ? is it has tight ? Kind Regards. Chris. -
Tinkertoes27 joined the community -
Lyndication reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
HZR13 reacted to a post in a topic:
What have you just 3d printed (for airsoft)
-
What have you just 3d printed (for airsoft)
mightyjebus replied to sp00n's topic in Guns, Gear & Loadouts
did a bit more work on the FNX slide. Still got a bit to do but getting there. (original broken TM slide at the top)
- Today
-
Nick G reacted to a post in a topic:
propane bottles
-
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Holy Warrior HWOCAG 1-6x24 Scope Mint condition 90 posted90.00 GBP
- GB
-
Gunboat Diplomat reacted to a post in a topic:
propane bottles
-
Interesting. I’ve long ignored propane due to the smell but if you cam get it without I may take another look.
-
HZR13 reacted to a post in a topic:
propane bottles
-
There's some Airsoft gas that's silicon free, and it's generally better for the gun. The only place the silicon oil really goes is all over the hop and BB as it's fired. Modern guns use nitrile o-rings, which don't soak up silicon oil at all. They also just don't dry out like that, but do benefit from grease to help them slip into place to seal better. It was a common belief that silicon oil swells o-rings and helps them seal, mostly brought across from airguns which did historically use silicon o-rings. You can also get propane brands with basically no mercaptan additive. Bullfinch is the one I run.
-
ButcherBill reacted to an advert:
Lct Rpd
-
Lyndication reacted to a post in a topic:
propane bottles
-
ryan84 joined the community -
Time Left: 6 days and 22 hours
- FOR SALE
- USED
Hi, selling my DE Noveske N4. It's in excellent condition, fired couple times, about 360FPS 0.2g on the chrono but never fielded. Collection available from LEEDS, can dispatch if paid with Paypal G&S250.00 GBP
Leeds, West Yorkshire - GB
-
shatis reacted to a post in a topic:
Gun picture thread
-
KenzieK joined the community -
Time Left: 6 days and 21 hours
- FOR SALE
- USED
Make: Tokyo Marui Gun/Model: M4 MWS Accessories: 1 leak free Double Eagle Stanag magazine, genuine Surefire M500, fully functioning, Z-Parts steel outer barrel, BCM Gunfighter charging handle, replica Acog attached to carry handle. Original Acog mount will be supplied. FPS: Gas and temp dependent Splits/Swaps/Part Exchange: N/N/N Price/Payment: £580 Pictures: Attached This is a genuine Surefire M500 and not a cheap replica. Both main light and navigation lights are fully functioning.580.00 GBP
-
I bought some mags for my ares l1a1 a while back but can't find the confirmation email, if I find it I'll let you know.
-
( From personal experience here, so any expert advice very welcome!) I'm under the impression that there is a small amount of oil in every bottle of Airsoft specific gas sold - hence shake the can before filling. WE for instance highlight the fact it contains it on the front of the can I happen to have at the moment. Remember being told as a noob many years ago that standard Propane is a very 'drying' gas, so it makes sense to me to add a bit to avoid it drying out O rings and so on. But I believe very little is needed, on the order of one or two drops per litre. Have I got it wrong? (again lol). Also standard/camping gas propane contains a very smelly additive for safety (so that any camping stove type leaks are very obvious). The smell can get very unpleasant / nauseating in an enclosed area, so filling outside is a good idea. I don't know if its related to the additive but I started to notice a bit of a thin brown coating appearing on some valves and seals after a while. Anyone else experienced this? The MAPP / Yellow cylinder stuff just flat out didn't work when I tried it. May just be me of course! Overall I just had so many issues that I went back to just using the comercial stuff. Having bought a VFC LAR and their SA58 I might have to look into it again though! 😄.
-
Thanks will have a look Google
-
Time Left: 6 days and 21 hours
- SALE OR SWAP
- USED
Decided to part with my G-Spec, I had great ideas of tuning it but other things have taken up my time and this project has sat on the shelf its completely standard internally and externally except for the SSG10 stock that has been fitted (original included) 1 mag, scope and sling included too. aside from a clean and a plink it hasn’t done much. looking for £180 posted any questions please feel free to ask180.00 GBP
-
I was about to meaningfully respond to this, before my Bot senses kicked in...!
-
WaDy joined the community -
Time Left: 6 days and 21 hours
- FOR SALE
- USED
APFG Rattler LT/Spear SD 6 Mags Comes with: Winter recoil spring 6 leaks free mags Spear SD handguard with Suppressor Used at one skirmish Ran around 1.1 joules on a .32 Selling due to opening funds for another rifle 625 posted+g&s625.00 GBP
- GB
-
Also, don't put silicone oil in your propane, there's no benefit
-
dtharris78 joined the community -
His titan nub was good, I’ve had two of his VFC NPAS’s and both have been awful. First one caused the replica to put out like 0.4J regardless of where it was set. Sent it back, got a replacement and it wouldn’t even fit without sanding down. Ended up getting a VFC one from china and it’s been fine. His easy loader is good too but you can’t really mess that up 😂
-
Time Left: 6 days and 20 hours
- FOR SALE
- USED
REUPLOAD hence old pics, wouldn’t let me renew For sale are two VFC VMags- One is used but working and V2 £35 one is a brand new and unused V3 mag £45 can do a deal on both please pm if interested thanks!70.00 GBP
-
JP MWS NPAS owner here. They were awful and I went back to the RA-Tech one. All the way open and I couldn't get my mk12 to DMR power (it maxed at 1.6J, my limit is 1.88J). As soon as I put the RA-Tech one back in, I could get up to 2.5J with it fully open. However, I will admit his titan nub works really well... Maybe that's in the 10% 🤣
