All Activity

Same with the STANAGs or just the V’s? I can get 18 in mine before the speed loader shits itself.

Loving this topic as I'm new to airsoft. I had to look up impulses profile to check as I repeatedly got shot by a guy in a Hawaiian shirt last weekend at Outpost Chester, but don't think it was him. 😆

Firesupport https://www.firesupport.uk/ If you are looking for great prices on Tokyo Marui and other products or you are looking for upgrade parts for your AEG, Shotgun, GBBR or GBB Pistol then Firesupport is the place to look. We stock over 16,000 products, we have over 200 different brands on our system. We try to set prices to be competitive with other shops or better. We have an amazing tech called Ian , he has a great knowledge of airsoft guns and parts needed to upgrade them. We only recommend upgrades that we would do personally rather than sell a load of parts that would make no difference. We sell, repair, upgrade and service all airsoft guns except HPA and some low cost Chinese models where spare parts are impossible to obtain. Emails are usually answered within a few hours and bar a few exceptions within a day. Most days the phone is answered quickly, however occasionally there are some days we have less staff at work and there is not always someone available to answer the phone. We get some great reviews on trustpilot https://uk.trustpilot.com/review/fire-support.co.uk and facebook https://www.facebook.com/FiresupportShop/reviews?locale=en_GB reviews. If you need original parts for your gun that you can't find anywhere and its a brand we deal with then we can special order direct from the manufacturer, the prices will be higher but that's dues to high postage costs, even on a part that does not cost much. We try to deal with people as we would like to dealt with, returns and refunds are usually dealt with quickly. All the products we sell on our web site that say they are in stock are actually kept in stock in our shop. We do not have a "European Warehouse" where products are ordered in when sold in our shop and you have to then wait 2-3 weeks for delivery. Products are usually despatched within 24 hours (Monday to Friday) of the day they are ordered. Occasionally we have a stock error (maybe once a week) where we then contact the customer and can change the order, refund the missing item or provide a full refund. Need it quickly then you need to choose the Next Day service and order before 12pm and we post it on a 24 hour service the same day. We get regular deliveries of products and loads of new products every year, over a 1000 new products have been added to the web site in the last year. Please see for latest updates https://www.firesupport.uk/new-products/latest-updates.html broken down by supplier and date. and for what's new see https://www.firesupport.uk/new-products/coming-soon.html broken down by what's new with a category per month. We are here to help. Frank

As a dickhead who uses a ghillie suit, this one actually really resonates with me and I totally agree (though I've been using civvie loadouts recently to make sure I keep the skills sharp as if I can hide in a hawaiian shirt, I can hide in actual camo); if I had my way, I'd say that you need to use a bolt action to use a ghillie, or a DMR if you're wearing a cobra hood, not a hood with a cloak; cobra hoods are head and shoulders only and people seem to willfully misunderstand that's what those are. But the number of ghillies that I see who basically just walk around with either some sort of HPA m4, or their bolt action rifle slung and never used with a mk23 loaded with .48s that they shoot people up close with...

My woeful knock off UH-1 does not sit level on the rail of any of the three guns I’ve fitted it too. Mini review: £52 from AliExpress, don’t bother, it’s shit. As you can see, it’s canted over once the QR is clamped shut. Not amount of adjusting the QR or shifting it around on the rail stops it. I’ve ordered some foil tape to try and add some thin strips to the offside to try and level it out, but any other suggestions? Is there some basic of QR rail mounts I’m missing here?

Waivers can’t stop a fraudulent claim, they show a signature that there is an understanding of the activity and agreement to comply with instructions

Oh boy, it's time for Impulse to make a thread about a niche platform that very few people have experience with, asking for people with experience with specific upgrade parts So I've been on a bit of a warpath trying to make my short KJW m700 magazines into usable magazines, as out of the box they tend to be pretty awful. The parts in question are the G&G gas route spring and the G&G knock arm and plunger set. No issues with the springs (outside of sixmm sending me the wrong ones), but the knock arm and plunger set I've had some issues with. Depending on where I order them from has given me two obviously different plungers. I'm guessing one is a newer design, however the one I assume is a newer design is also too short when I install them. Also, the C-clips that go on the middle to hold them in place inside the magazine just don't fit on them either. Also the knock arms simply don't work. They basically keep the gas router constantly open. Am I missing something here? And when both are installed

😆 💯 Is this a ‘thing’? My local site makes use of a lot of pallets, but they’ve made a good job of turning a lot of them into proper fully fledged structures or using them as walkways to stop the ground getting churned into sludge when it’s wet. I will say it is infuriating when the pallets are just stacked on top of each other, making anyone taking cover behind them clearly visible, yet the ‘no-shooting-through-pallet-gaps’ rule reduces you to a ridiculous immersion breaking Mexican standoff.

Custom gbb workshop. sig P320 AXG Legion. Parabellum gbb. Unicorn out barrel. Unicorn hop-up chamber set. Unicorn inner barrel.

waivers only there to stop general public claiming fraudulent injury claim

where to begin ....... people that sell second hand stuff that's broken or will break when the new person uses it , idiots that buy HPA because they have been told its the best , and they have no clue how to operate the equipment (been at chrono and the marshal asked the guy to turn down the regulator ..... he then asked the marshal '' how do i do that ?'' General shit talkers , with subjects that relate to RS firearms or gear they have watched on a YouTube video dickheads that use ghillie suits ... and don't follow the principles of camo and concealment, using heaviest ammo and only getting 50m shops that dont give the correct advice for new people , and just use them as a sale pallet sites player marshals any airsoft team that has the following words in there name , or associations to ancient history, Spartans, hoplite , immortals , guards , wolf , dog , dragon, phoenix , headless chicken squad names nicco any youtube video that is set up like a call of duty commentary with hit markers and killfeeds and music any event that uses ai images to advertise an event, that goes for shops too obnoxious geardos idiots that have go pros , on everything call signs for team members anyone that turns up in a german ss uniform un ironically or not at a ww2 event people that dont know the limitations of there equipment too friendly regulars .... people that think there regular site is there personal toy box and complain when they lose walts people that played about a years airsoft , equate that to them knowing everything , and telling you the best gear and upgrades to use

Either that or get a life.

I think we're agreeing with each other here, yeah.

The VMags have a feed track that's too narrow, and you need to butcher it a bit to allow the BBs to stack properly.

It is always hard to tell with phone videos as they tend to over-emphasise the higher frequencies, often making gearboxes sound worse than they actually are. However, while that is decent, it does sound as if it could do with a bit of improvement. Are you certain that the motor height is properly adjusted? If it is, then what you do next is rather dependent on how much time and effort you want to put into it. Is the motor heating up? A brushless motor shouldn't really get hot and neither should the wiring. If they are, the shimming is probably too tight. Also bear in mind that some pinion gear/bevel gear combinations are noisier than others and some gearsets are noisier than others. How the motor sits in the pistol grip and the shape of the pistol grip can also have an impact. I have a beautifully shimmed gun that, with a standard Magpul M4 grip on it, is very quiet; with its actual grip, it is a tad noisy because it holds the motor at an awkward angle.

Thank you mate. Looks clean AF that. The irons are tidy, just need something taller due to face pro.

Asking for a friend, does anybody know of a steel tooth piston and piston head that would fit the TM NGRS HK? Thanks in advance much appreciated

VFC have clearly hired ex GHK QC staff 😄

Honestly don’t think it has been touched at all. If it had been tinkered with, without the VFC tool, I think there would have been scratches all over it. Pretty sure a QC issue from the factory, but how it could have got out being that wonky is beyond me!