All Activity
- Past hour
-
Leo Greer reacted to a post in a topic:
Are 11.1s correct for my gun after the work that has been done to it???
-
In short, the actual voltage of 11.1v (or 12.6v fully charged) will cause no more damage to your Aster than a 7.4v or 9.6v would. The increased speed doesn’t actually harm your bearings more. The gear rotating faster doesn’t put more lateral stress on the bearing cage, but instead it is your spring doing the damage there. However, the increased speed could cause issues with PME, which would then require a stronger spring to alleviate, which would end up putting more stress on your bearings and oh my now we are making the build less reliable! It’s different for every build (and if you’re using the stock G&G spring then you actually have a stronger than normal spring in there), but the typical “PME ceiling” for a build around this power level is about 25 RPS. I have pushed a 1J build to 30 before, and I’ve also seen 1.5J builds experience PME at 25, so take the time to test your own build and work out all the little details! In short, as long as you don’t knacker anything up and use good tech sense you’ll be totally fine. - Today
-
Time Left: 6 days and 22 hours
- Wanted
- Used or as new
I'm after an afg, qd sling mount (this one I do want genuine) and type 1 rail covers all in black. Would also be interested in a handstop and potentially an mlok torch setup.£1,234
- GB
-
MistakenMexican reacted to a post in a topic:
TM Glock 17 gen5 mos
- Yesterday
-
Tackle reacted to a post in a topic:
Tell Us a Gag. Please!
-
Tackle reacted to a post in a topic:
Tell Us a Gag. Please!
-
Moved -
Tackle reacted to a question on an advert:
WTB: TM Gaurder glock - steel slide
-
Galvatron reacted to a post in a topic:
Well Pro XM5/M7 GBBR
-
Galvatron reacted to a post in a topic:
Well Pro XM5/M7 GBBR
-
Wrong Section
-
Cannonfodder reacted to a post in a topic:
Tell Us a Gag. Please!
-
Cannonfodder reacted to a post in a topic:
Tell Us a Gag. Please!
-
Socks reacted to an advert:
Hephaestus OTS 14 Groza
-
EMG x CYMA DDM4 GBB (Used, Great Condition) + 1 extra GBB Mag
Socks commented on sodat's advert in Gas Rifles
Is this an AEG or a GBB, I'm confused... -
A mummy covered in chocolate and nuts has been discovered in Egypt. Archaeologists believe it may be Pharaoh Roche.
-
They're not great on the WE 226, bit too wide. WE 226 is about an extra 30% wider than the desert warrior
-
Time Left: 6 days and 17 hours
- For sale
- As new
If anybody has one, hit me up.£123
-
Bundle with 2 full metal spring pistols Glock G19 and HiCapa
drgrzly posted an advert in Spring Pistols
Time Left: 6 days and 17 hours
- For sale
- Used
Selling those 2 spring pistols as I don't need them. They are full metal, from galaxy, but have been customised (especially the hi capa), so they are kinda unique. The hi capa comes with a functional red laser, the glock with a Hogue grip. 0.12 BB included. £45 shipped including pp fees, or £40 collection£40
London - GB
-
That thing looks sick! If you like the ergo of the thumbhole lower foregrip and don't want to replace it, ExE on YouTube has a good wood furniture refinishing guide for NATO's cold war oiled wood type furnitures or soviet style resin coated woods. If you want a different finish, I'm sure there are other finishing guides for that wood type. And im sure sanding that's doable, If not time consuming. https://www.youtube.com/watch?v=wXkF_iNQR8o&t=284s Here's Explosive Enterprises' guide on simple NATO/USSR wood finishes.
-
An option that isn't obscenely expensive, greatly welcomed.
- 1 reply
-
- 1
-
-
Time Left: 6 days and 16 hours
- For sale
- Used
Surplus to requirements. 6x Mags - all leak free. No need to buy as a lot so i've priced the mags individually. £15 per mag NOT including postage. Buying multiple mags will result in a flat postage charge (usually around £3.50 for a 48 hour service with Royal Mail)£15
-
Time Left: 6 days and 16 hours
- For sale
- As new
Selling my mtw Daniel defense with suppressor scope grip rail cover has upgraded zci barrel and hop rubber no magazine hpa not for me also selling reg tank and line separately no magazine just the rif with bits on it cost for me £1300total selling £900 posted£900
CARDIFF, Torfaen - GB
-
Looks like Well Pro are joining Toxicant and APFG and doing a GBBR XM5/M7. It will probably use VFCs 7.62 platform as a base considering Well Pro's existing relationship with VFC's parts so no doubt better than Toxicant's somewhat pants effort.
- 1 reply
-
- 1
-
-
Time Left: 6 days and 16 hours
- For sale
- Used
For sale are this items. All laser cut but the warrior frag pouch. TG Front Panel - 20£ each TG Pistol/SMG pouch - 10£ esch TG Pistol pouch with flap - 10£ TG small GP pouch - 15£ WAS frag pouch - 5£ I will pay PP fees but not the shipping for a singlw item purchase.£123
-
Time Left: 6 days and 16 hours
- For sale
- Used
Sig Rattler suppressor and flash hider from a APFG Rattler. £50, buyer covers PayPal fees and postage. Mainland UK postage only.£50
-
Time Left: 6 days and 15 hours
- For sale
- Used
Amazing condition hardly used only little scratches £12 including postage£12
-
I have one of these ... quite good for the minimal cost. Holds my TM Desert Warrior with X300u quite securely
-
Oh man... I'd be all over that bren (price depending) and me being me would have to pay with it, and convert to a L4...
-
I'm based in between Derby and Nottingham mate, and yeah the advise I'd good i agree.. but as I dont drive and with this being a massivly expensive hobby, I definitely need to get my driving sorted out first off i think & then ill get myself properly into the sport Oh & I paid £160 for it and he's giving me £100 back
-
This advert is COMPLETED!
- For sale
- Used
Leaking from the top so needs fixing body is in perfect condition £20 posted£20
-
Time Left: 6 days and 15 hours
- For sale
- As new
Repro Eotech 558 with green sand red dots. Very good quality. Has markings and trades. Good conditions, the glass has some scratches, but they are only visible at a certain angle and with light reflected on the lens, otherwise you would not notice them. Including a lens protector. £35 including pp and shipment£30
-
Time Left: 6 days and 15 hours
- For sale
- Used
All prices include postage/fees Specna arms edge metal m4 receiver with QD rear access. £15 Wood Ak74 handguard SOLD SOLD SOLD SOLD SOLD Ak74 Railed gas tube. £15 (Unsure on make but for Cyma) X2 mid caps. Unsure on brand. Quite weighty, unsure of age. Fitted my specna arms ok £10 5ku side folding M4 buffer tube for Ak's. (simply remove pin and fit) £22NO VALUE SPECIFIED
-
Out of interest, how much did you pay for it and how much is he giving you back? If you were local, I would offer to sort it out for you for the cost of any parts used, even though I dislike Gate ETUs. However, given the cost of postage in both directions, that probably isn't viable. As the Butcher has said, don't let this put you off; he has also given you good advice.
-
Time Left: 6 days and 15 hours
- For sale
- Used
Great condition just some usual wear on the rail and light scratches on the body from use, it was serviced about 8 months ago and it’s been gamed about 7 times since then, it got fully upgraded at the same time so all the parts are near enough new. Everything externally is fully trade marked Upgrades list: External: Base gun: cybergun colt m4A1 Madbull mk18 rail Pts pistol grip (magpul style) Replica eotech and riser Element torch + pressure switch noveske flash hider CTR stock Stubby foregrip Internal: Warhead 45k brushless motor Gate titan mosfet Maxx trigger Prometheus inner barrel Cyma high speed gears 13:1 Cyma piston Fps air seal kit Carbon fiber reinforced tappet plate( for V2 gearbox) ZCI bevel gear Prometheus hop rubber deans wired Also comes with 5 200rnd mid cap lancer magazines can include a battery at extra cost (just ask) this rifle sounds very nice and has really good trigger response and fire rate so feel free to ask for a video of it shooting. Text me here on forums or my number is +447746115797 if your interested or need anymore information £550 ONO with postage and PayPal G&S fee£550
- GB
