All Activity
- Past hour
-
-
Tackle reacted to an advert: WE Gas Drum Magazine for 17 Series (350 Rounds - Black)
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Price is final as the magazines alone is worth more given a new SMG8 mag goes for £45 in shops, want a quick clear out, shipping will have to be quoted on top of the £100 due to the weight. This is the long discontinued, aliased version of the WE SMG8 with correct MP7 external and marking. This purchase is ideal to upgrade an SMG8 into something that's realistic. Listed as boneyard as semi-auto is not reliable, sometimes it catches the sear, sometimes it doesn't, happy to demonstrate in a video for serious buyers. Full auto function normally.100.00 GBP
-
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
Never used, never tested, did not buy it with battery as I was planning to gut this for a GBBR magazine, then Dytac released ready made ones so I never pursued this project. Price new is £45 in the UK. t You would need one of these battery set to make it functional. Price is posted.15.00 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- NEW
As per photos 1) Tango 6 by ArmaSight, black/fde, first focal plane, with sig alpha mount £200 2) ACRO red dot £40 3) Juliet 3 and Romeo 4 gen 2 combo £100 4) Romeo 4T FDE £80 BLACK £65 5) SRD 672TI £40 6) SLX MG FDE £40 7) vfc v3 pmags green gas £40/each 😎 APFG minimalist stock plus £60/each 9) Minimalist mini stock £60 10) VFC SIG AIR COLLAPSIBLE STOCK MPX MCX VIRTUS 11) MPX HANDGUARDS £40/each 12) MPX green gas magazines x6 - £40/each or all 6 for £210 12b) Spiritus Systems Micro Fight Chest Rig Chassis MK 4 Ranger green + x4 SMG insert BRAND NEW £60 Collection available NW6 London - Courier 48hr in uk, buyer pays feesAsk for price
-
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
My ppsh-41 (ABS stock version) that I’ve had for almost a year but selling as I have another aeg and don’t use this enough. It’s got some wear around the magwell and other areas from general use. The drum holds 2000 BBs and is a hi cap wound on bottom. only thing is one of the rails that the mock bolt runs on lost its small c clip so it would move forward about an inch. This didn’t affect the ebb and it’s now superglued down and has held for the last couple games it got taken to. externally it’s not the best. Used to be two tone red so the inside of the stock shows some residual paint. Externally I tried to weather it a bit (quite hard to do on a plastic stock as I realised) so it doesn’t look as good as it could but it’s passable. Could do with a re spray I think if you don’t mind showing me some pics of your gear or memberships if your gonna buy £80 posted80.00 GBP
-
Time Left: 6 days and 23 hours
- FOR SALE
- USED
Got this as part of a bulk deal and is in need of some TLC. The paintjob leaves a lot to be desired - not the worst and not the best. It's not tacky like some plasticote shite, but it's clear the previous owner tried to handle it before the paint properly cured. Nothing some paint stripper can't correct (at least on the metal). the plastic grip paint seems to have settled well. the gold areas are the worst offenders. Internally the gun is sound, well cleaned and lubed and cycles perfectly fine. The mag is a bit of a fussbag. One minute the hammer valve has a small leak, the next minute its gas tight, then it leaks again. comes with a basic ammomax paddle holster with belt hook. probably the only thing that both looks and works as intended lol open to offers but nothing crazy low. I'd rather fix it up and run akimbo with my other deagle than let it go too cheap.70.00 GBP
Mexborough - GB
-
tjibb joined the community
-
-
- Today
-
HZR13 reacted to a post in a topic: Macks airsoft dreamers of the week thread
-
MSSNAFU reacted to a post in a topic: Rifle 6mm, No.9, Mk. EM-2
-
https://www.usedairsoft.co.uk/rif-s/electric-powered/m4-and-shotgun_i88707 Anna won’t give up..
-
HZR13 reacted to an advert: HUGE BUNDLE - leaving Airsoft
-
-
yeah my meaning was that if you've got the skills and equipment to put together the em2 then that could translate to for example making a lebel shaped wrapping for a vsr or that kind of thing. but that would make every project different with presumably its own challenges.
-
GeorgePlaysAirsoft reacted to a post in a topic: Gun picture thread
-
-
JRL-18-UK joined the community
-
Hi i recently got hold of a pre etu g&g l85a2 and im gonna install a gate picossr mosfet to it as 7.4v it runs really sluggish and I just want to be able to running 11.1v amd this would be the first time iv installed a mosfet so if i mess it up its £12 lost. However im unsure about the electric breaking wire should I remove it I know a few people do but all them have more fancy mosfets from in them from what iv seen. Any help is appreciated thank you in advance
-
Time Left: 6 days and 21 hours
- SALE OR SWAP
- USED
Real steel arms 72 mount and clone m1 scope. The arms mount is the 5.56-7.62 version and is a solid bit of kit. Scope has never been used on the field and was only used for photos on some mk12s I have put sale or swap as I really want a ghm9 g2. Price for both shipped is £210 but if you don't want both we can sort something.210.00 GBP
-
ButcherBill reacted to a post in a topic: Gun picture thread
-
-
-
-
-
cameronward joined the community
-
HZR13 reacted to a post in a topic: Gun picture thread
-
johnnyj reacted to a post in a topic: Gun picture thread
-
-
Cannonfodder reacted to a post in a topic: Memes to chill the f#ck out
-
MSSNAFU reacted to a post in a topic: Rifle 6mm, No.9, Mk. EM-2
-
Time Left: 6 days and 20 hours
- FOR SALE
- NEW
Hi, I fancied trying a different play style but found that it didnt suit me so i am selling this on. It is in great condition eith very little use. The price does not include postage,which would be £5. Any question, please just message me.40.00 GBP
Stamford, Region - GB