All Activity
- Past hour
-
Galvatron reacted to a post in a topic:
What grinds your gears on forums
-
Galvatron reacted to a post in a topic:
What grinds your gears on forums
-
Case in point was the chap selling what he claimed was a fully upgraded Ares Honey Badger yet he didn't know what had been upgraded internally. It was then pointed out to actually be a Double Eagle model and the "upgrades" he eventually listed were questionable. I think he was duped from the person he bought it from originally and tried saving face by selling it on to recover some of his losses.
-
Austeyr reacted to a post in a topic:
VFC KS-1/L403A1 GBBR
-
Galvatron reacted to a post in a topic:
What grinds your gears on forums
-
Time Left: 6 days and 23 hours
- For sale
- Used
As much as I like this gun I bought an MCX not that long ago so must go. Has ware as shown from use and mounting optics but otherwise in good condition. Currently has the original black lower fitted although comes with an empty tan lower with genuine BCM furniture. Only thing to note is the tan lower receiver has had a small bit that holds the trigger guard on snap although does not affect function and is held on well by the pin so only noticeable if you’re looking for it. Because of this issue the receiver has not been included in the final price. Will come with: -Genuine BCM trigger guard -Genuine BCM grip -Genuine BCM stock -Replica Geiselle charging handle -Spare black receiver with VFC furniture -3x V3 Stanags with mag assists -NPAS valve Total value for the lot is £900 so will do £650 with postage and PayPal fees covered. If you’d like a PDI W-hold bucking then can throw a new one in as well. Will also do £440 posted for the stock gun with mags.£440
-
Has a number of possible improvements on the VFC AR system, should be interesting to see how it runs.
-
Lyndication reacted to a post in a topic:
Gun picture thread
-
That's exactly the information I was after, thanks! Last time I built an AEG the ASG cnc30k and gate titan was about the most advanced thing you could put in your gun. What counts as a "decent" motor these days?
-
Time Left: 6 days and 23 hours
- For sale
- Used
5 x GHK M4 GMAG Green Gas Magazine (32 rounds, Compatible with G5) - TAN Used about 4 or 5 times if that G5 Sold so no longer needed RRP £70 each All 5 for a bargain price of £240 Inc P&P£240
oxford - GB
-
PopRocket123 reacted to a post in a topic:
Brushless motors
-
HZR13 reacted to a post in a topic:
What grinds your gears on forums
-
HZR13 reacted to a post in a topic:
What grinds your gears on forums
-
HZR13 reacted to a post in a topic:
What grinds your gears on forums
- Today
-
Cannonfodder reacted to a question on an advert:
ASG USW A1
-
Time Left: 6 days and 22 hours
- For sale
- Used
Beautiful and well loved TM Famas with RealSteel upper rail, 6 mid caps and 4 hi caps. Also included is the impossible to find railed handguard(as well as the original), an extra pistol grip and spring guide. Wired to deans. Doesnt come in orignal box im afraid but will be well packed if shipped. Upgrades are extensive including: Laylax Inner barrel 469mm Basic inline mosfet for contact protection Maple Leaf 50 Degree bucking, Ohm nub Systema FAMAS Metal Spring guide RA M100 Spring RA 16:1 Gearset Nuprol 6MM metal Oilness Bushings Prometheus FAMAS Air Nozzle EG560 Motor Upgrade with NdFeB Real Steel full Length Top rail. Cybergun Metal Hanguard Tri Rails. Brand new Unopened King Arms FAMAS Silencer adapter (CW thread) Another silencer adapter with CCW thread but the screw in it is stripped (I held it in place by taping the inner barrel) And +2 batteries!£250
Downham Market, Norfolk - GB
-
@Boss98 You need to read the forum rules, especially the classifieds rules, post in the correct section & make sure you include up to date pics, & follow rule 5.
-
Time Left: 6 days and 22 hours
- For sale
- Used
11.1V Lipo. 1200mAh. Dean Connector. Hardly been used as was a back up spare. £10 with free postage.£10
Rawtenstall, England - GB
-
Time Left: 6 days and 22 hours
- For sale
- Used
Very reluctant sale but has been sat in storage waiting for a build for ages Madbull Troy TRX battle rail, this is a gorgeous rail and very lightweight it’s 11 inches long and includes 3 rail segments that can be mounted anywhere on the rail. great condition price includes postage and PayPal fees£92
-
Time Left: 6 days and 21 hours
- For sale
- Used
Slong Airsoft Suppressor. Original foam removed and replaced with soft foam that actually works - makes a huge difference on a HPA RIF. Only used in the garden for plinking so good condition. 160mm long. 35mm diameter. 14mm CCW thread. Cover which is too long. £15 with free postage.£15
Rawtenstall, England - GB
-
Even so, it's still the cheapest "clone correct" replica on the market to my knowledge?
-
Time Left: 6 days and 21 hours
- For sale or swap
- Used
Friend borrowed it . An it stop working . Recoil stopped a just making grinding sound. Tried to have a go myself a can’t do it . Connector has come off wire. This is a fully upgrade beat an all parts are there . Just needs someone who knows what there doing. 3 mags all the internals swapped out and titan installed. Fly namazu nub and prommy purple bucking aswell as a orga lux barrel has asg motor installed.£200
- GB
-
Well, i'm accidentally on the preorder list, so lets see how this pans out.
-
Time Left: 6 days and 21 hours
- For sale
- As new
ASG / Modify Steyr Scout Modify H-nub (red/blue) Spare Buckings Spring setup 0.48g at 2.3j Tridos Speed loader Adaptor Custom leather sling 5 mags £315 Inc P&P £295 Inc P&P £280 Inc P&P "Final Price"£295
Oxford - GB
-
Time Left: 6 days and 21 hours
- For sale
- As new
Warrior Assault Systems Plate Carrier setup in Coyote Tan Hardley used but in excellent condition Admin Panel Dump Pouch 2 x Med Utility Radio Pouch Back Pack 9 x M4 Pouches 2 x Pistol Pouches Great condition £200 Inc Postage £170 Inc Postage £160 Inc Postage£160
oxford - GB
-
"Fully upgraded" Has the m90 spring replaced with a m110 on a QSC gearbox lol
-
For me it usually means "I spent a shit ton of money for a tech to rinse me for a bunch of parts that made it perform no better than stock BUT LOOK HOW PRETTY!!!!!"
-
There's a few brushless motors on the market now, some are wank and some actually work well. The better ones have ESCs that will work with airsoft ETUs properly, are way more efficient than brushed motors (so less battery drain) and in most cases offer far higher torque at a given RPM. The good ones are still expensive though so if you're fitting an ETU anyway you can usually get away with a decent brushed motor.
-
Does the MWS have to take STANAGs if not, consider the Savia PCC. Takes hicapa mags. If you’re already doing IPSC, I’d wager you’re running a hicapa. The PCC takes hicapa mags so you don’t need to invest in new, heavier mags. its largely MWS spec. It does about 1.3J out of the box with the stock set up. You’d need to do very little to get it shooting at 30m accurate. I think all I needed to do was a guns modify spring set and pink flamingo hop unit. It’s shooting 40m flat with respectable accuracy on 0.28s.
-
In my experience, when someone claims “fully upgraded” it’s far from fully upgraded, they just lack the knowledge or inclination to realise that. The second option is they’re trying to scam people by selling something largely stock as “fully upgraded”.
-
Gday All! I have recently purchased a used ASG MP9 / KWA MP9 which has had a little internal work done. As I understand, these MP9s are notorious for internal bits going and so warrant some work here and there. Whilst its fully functional currently, I was keen to purchase some uprated steel bits so that if it inevitably craps itself I can swap those in and keep it functioning. Currently as it stands its got: `Lees Precision Gas Flutes (To keep tha power down). `Wii Tech Outer Barrel. `Wii Tech Nozzle. `Wii Tech Light Trigger Spring. I have had a gander on various forums / browsed exisiting listings and roughly compiled an attached list of what I think would be a good idea, but would massively appreciate any seasoned MP9 users opinions. For reference, pew will be used on Green Gas Only (no hpa) and will be in semi only about 99% of the time.
-
Time Left: 6 days and 17 hours
- For sale
- Used
Selling the last of my ERGs — gutted to let it go, but my Harley needs more work and I need it road-ready for work. This started life as one of the original PTS ERG Scouts, but it’s had a modern upper fitted and is wired for a PEQ box (included — cracked casing but still functional). Could easily be rewired for a PTS battery vertical grip if that’s your setup. 🔧 Tech Details: Electric Recoil System (ERG) — designed by the same guy behind TM’s NGRS Weighted buffer tube simulates recoil with each shot Stop-on-empty feature with ERG mags (standard M4 mags also fit) Bolt release required after reload — adds realism 📦 What’s Included: Flip-up iron sights. 1x ERG Pmag. 🧩 Optional Extras (can discuss): Other stocks available in black or tan. Red Dot sights also available. 💬 Notes: Gun runs well and has been recently serviced by BZ Tactical. Ideal for someone who wants realism without going full GBBR. Price £275 negotiable within reason — no lowballs or time-wasters please. Postage extra. Drop me a PM if interested or need more pics/info.£285
- GB
-
Time Left: 6 days and 17 hours
- For sale
- Used
Maxpedition Tactical Briefcase – Medium Size – £60 Built like a tank, as you'd expect from genuine Maxpedition gear. This is the original—not one of the countless knockoffs flooding the market. I used this during the Korean Olympics to haul tools, a laptop, and critical paperwork. It’s tough, reliable, and ready for action. Includes a non-original black strap (functional and solid). If you want the official Maxpedition strap, it’s available via Maxpedition UK. No longer needed—grab a piece of proven kit for £60 plus a £5 for postage.£60
-
Stack up airsoft has a mancraft Stryker ATM -
TENNERSFC4 joined the community - Yesterday
-
When the browning hp needs a full strip down and clean. Knocker valve was sticking slightly was worried it was about to snap the way they like to, luckily all is good so rebuilt and lubed all good now.
