Hiya! I think i've been a bit to optimistic about my battery size.

[Yashy]

https://www.componentshop.co.uk/11-1v-1450mah-25c-continuous-discharge-lipo-battery.html I brought this thinking it will be the right size for my new gun.. I was wrong. the battery is a THICC BOY, wont fit in my stock.

 

I Can't seem to find any other batterysize smaller, can anyone guide me a place where i can find the right 11.1v battery size? Here is me trying to stick it in..... (literally) 

[Anonymoose]

Maybe something like this, but you may need to change the connector.

 

https://www.vapextech.co.uk/airsoft-11-1v-1300mah-30c-lipo-battery-with-case-lp304-vapextech

 

It's hard to say without knowing all the dimensions.

[Yashy]

12 minutes ago, Anonymoose said:

Maybe something like this, but you may need to change the connector.

 

https://www.vapextech.co.uk/airsoft-11-1v-1300mah-30c-lipo-battery-with-case-lp304-vapextech

 

It's hard to say without knowing all the dimensions.

ah anyway I could find that in a single? (single battery)

 

EDIT: i dont know the stocks dimensions, however I have asked the seller and he has informed me it needs to be something like this https://www.amazon.com/dp/B09TSXBDZH/ref=cm_sw_r_as_gl_api_gl_i_KZYXATAAMFKFPDFTK37F?linkCode=ml1&tag=ashley0687-20 

 

(i am from UK) 

Edited 10 hours ago by Yashy

[Anonymoose]

https://www.vapextech.co.uk/airsoft-11v-2200mah-30c-lipo-battery-with-case-lp020-vapextech

 

Not sure if it's too big.

 

Or these:

 

11.1v 1450mAh 30c Stock Tube LiPo Battery https://amzn.eu/d/6QQDYln

 

Hilldow 11.1V LiPo Airsoft Battery 1100mAh 30C Rechargeable Stick Pack Batteries High Performance Compatible with Deans/T Plug for Airsoft Guns Rifle Model https://amzn.eu/d/08sHpL7

 

Edited 9 hours ago by Anonymoose

[Tackle]

If you bought it from componentshop & the size differs from what is on their website, then return it for replacement for one thats the correct dimensions ?

alternatively if you measured the internal size of your stock tube, & subsequently ordered the wrong size, contact them & politely ask for a return/exchange, but be prepared for a "restocking" fee etc ?

[Yashy]

4 minutes ago, Tackle said:

If you bought it from componentshop & the size differs from what is on their website, then return it for replacement for one thats the correct dimensions ?

alternatively if you measured the internal size of your stock tube, & subsequently ordered the wrong size, contact them & politely ask for a return/exchange, but be prepared for a "restocking" fee etc ?

yeah I sent them a email asking for a refund, however I didn't think to ask for a correct dimensions. Thank you will ask that.

[ButcherBill]

[Tackle]

6 minutes ago, Yashy said:

yeah I sent them a email asking for a refund, however I didn't think to ask for a correct dimensions. Thank you will ask that.

The dimensions are show on the link you added to your first post.

[Galvatron]

Is there a reason why you seem to have abandoned your recent topic asking for advice on a suitable battery?

 

Hudson's advice in the first reply to that topic looked to be very close to the mark as this battery appears just slim enough to fit in the buffer tube.

 

https://www.bztactical.co.uk/rebel-battery-1450mah-lipo-11-1v-30c-stick-deans

 

Do you not have a tape measure or a ruler where you can get a rough measurement?

[Cannonfodder]

4 hours ago, Galvatron said:

Is there a reason why you seem to have abandoned your recent topic asking for advice on a suitable battery?

At a guess I'd say because he didn't like the advice given so decided to ignore it, just like in every other thread he started.

 

@Yashy I'm not being funny but if you're going to ask questions only to ignore the replies dont be surprised if pretty soon nobody wants to help you