HuttArmouries Posted November 21, 2023 Posted November 21, 2023 (edited) So ive been in the process of 3d modeling slides for glocks. This started out as me wanting a red dot as low to the slide as possible on my glock 26 and with as little weight as possible and then I decided I may as well make the other lengths. I have 17, 19 and 26 working on raven, we and kj works glocks and now I have the models I may as well make some custom stuff. Is there anything in particular people would like to see? I will probably be making some durability changes such as making the spring guide hole a seperate piece that prints in a different orientation but the slides already work very well. There is a noticable increase in snappiness too on we and such since this is a ton lighter than their normal slides. Ill be putting a bunch of rounds through them to see how durable they are but these first versions are just in pla filament anyway. Edited November 21, 2023 by HuttArmouries
Supporters TheFull9 Posted November 21, 2023 Supporters Posted November 21, 2023 I've recently encountered a situation where I really want a replacement set of plastic frame and slide for a different TM platform, so I do wish such things were available and made from a plastic that's at least as good as TM's stuff. But end of the day all I'd recommend is testing these out as much as you can, iterate to make them as tough as possible, worry about the random weird features that internet strangers will ask for much further down the line. BigAl 1
HuttArmouries Posted November 21, 2023 Author Posted November 21, 2023 4 hours ago, TheFull9 said: I've recently encountered a situation where I really want a replacement set of plastic frame and slide for a different TM platform, so I do wish such things were available and made from a plastic that's at least as good as TM's stuff. But end of the day all I'd recommend is testing these out as much as you can, iterate to make them as tough as possible, worry about the random weird features that internet strangers will ask for much further down the line. Fair point. I intend to run the g26 and 19 versions of this as my regular pistols for now to see how they hold up particularly with a red dot mounted to them as im using brass threaded inserts melted into the plastic. going to be interesting to see how they hold up TheFull9 1
BigAl Posted November 22, 2023 Posted November 22, 2023 A 17L would be cool, of coarse a longer outer barrel would also be needed.
HuttArmouries Posted November 22, 2023 Author Posted November 22, 2023 (edited) 38 minutes ago, BigAl said: A 17L would be cool, of coarse a longer outer barrel would also be needed. that certainly seems doable but there is the slight issue that my 3d printer has an 18 x 18 x18 cm build area so I dont think id actually be able to print it if I did make it. About 220 is the most I can squeeze out diagonally but the 17l slide is 242 so id probably have to do it in 2 pieces. Edit: my mistake. overall pistol length is 240, slide is 225 so I may just barely be able to get it printed Edited November 22, 2023 by HuttArmouries
gavinkempsell Posted November 22, 2023 Posted November 22, 2023 Dude...print slides for an Auto9, you'll make a fortune.
BigStew Posted November 22, 2023 Posted November 22, 2023 A functioning Lawgiver from Dredd 2012 gavinkempsell 1
HuttArmouries Posted November 22, 2023 Author Posted November 22, 2023 1 hour ago, gavinkempsell said: Dude...print slides for an Auto9, you'll make a fortune. Dont have an m9 or 93r on hand unfortunately gavinkempsell 1
woody_2231 Posted November 22, 2023 Posted November 22, 2023 (edited) mr6 from black ops 3 Edited November 22, 2023 by woody_2231
HuttArmouries Posted November 23, 2023 Author Posted November 23, 2023 Made some design changes to the glock 26 slide as I was getting the most breakages with that one. the most common one was the ring for the front of the guide rod snapping off. In this new version the front barrel and guide rod holes are a seperate piece that slots in which allows me to print it face down and have the layer lines going along it. Will see how well this method works btu it may leave the slide able to flex too much On 22/11/2023 at 01:23, BigAl said: A 17L would be cool, of coarse a longer outer barrel would also be needed. Finished modeling a 17 l slide but unfortunately as I was printing it the heat sensor on my printer died so im waiting for a replacement. Also modeled a 3d printable screw in barrel extension. Its not the strongest thing in the world but it will do for now until I can find a stronger alternative.
HuttArmouries Posted November 25, 2023 Author Posted November 25, 2023 17 l slide done and working. Taking this and a g19 oht to a game tomorrow and im gonna run them on black gas all day and see what breaks first. Dont mind the horrendus lower. Ill be swapping it out soon enough TheFull9 1
gavinkempsell Posted November 25, 2023 Posted November 25, 2023 Is that the horrendous lower you're selling? ?
HuttArmouries Posted November 25, 2023 Author Posted November 25, 2023 1 minute ago, gavinkempsell said: Is that the horrendous lower you're selling? ? Was selling it but Ive pulled out most of the glocks I was selling apart from the vorsk ones to be doner guns for these projects XD gavinkempsell 1
Darkmikey22 Posted November 26, 2023 Posted November 26, 2023 (edited) Would love to have something like this.... Edited November 27, 2023 by Darkmikey22
Recommended Posts