Jerryy Posted October 8, 2023 Posted October 8, 2023 (edited) Hey dudes and dudettes, so ive just put a new motor, new piston head nozzle etc into my RIF, im just trying to find out if it sounds screechy, ive done teching before but i just need the experts opinions, if it helps im running 16:1 gears, with a XT 22tpa 25k motor, please listen to and see the video and tell me what ya think! Thanks! IMG_7158.MOV Edited October 8, 2023 by Jerryy
Shamal Posted October 8, 2023 Posted October 8, 2023 I'm no expert but it sounds good to me.? Jerryy 1
Supporters Adolf Hamster Posted October 9, 2023 Supporters Posted October 9, 2023 Maybe a little on the tight side, hard to tell with a shorter burst but not too bad. Jerryy 1
Leo Greer Posted October 9, 2023 Posted October 9, 2023 I don't hear a crazy amount of screech, but I think it could be better. It probably has to do with your bevel to pinion shimming and getting it just right. I'm assuming the video is using 11.1v--are you able to take a vid using 7.4v? (7.4v is way easier to judge shimming. This vid is the closest I've built to what you have above. Notice you can hear a light shh noise, but no screech or high pitch. Lozart 1
Pseudotectonic Posted October 10, 2023 Posted October 10, 2023 On 09/10/2023 at 16:14, Adolf Hamster said: Maybe a little on the tight side i concur
Recommended Posts