2 tightbore or 2 not?

[Turtlings]

This has probably been discussed but im just to thick to look for it.

 

What would be the best bore for a DMR mancraft build??

 

Im currently on 6.03 and it seems ok, but I reckon some people have been up and down the bores and have the answer.

 

Any help is good help.

 

Thanks for reading

[Steveocee]

Wider generally offers more stable flight, tighter gives higher FPS. As you're running a mancraft you'll have volume for days so go wide. Orga 6.23?

I personally run a PDI 6.05 in everything I have.

[RostokMcSpoons]

I found a video that shows the wide bore is less accurate and had no greater range.

 

Other opinions are available but that was an actual test, though not particularly scientific (firing into the distance and saying "that's better / that's worse is not the same as measuring group sizes).

Edited March 27, 2022 by RostokMcSpoons

[Turtlings]

Thank you both for unclarifying.?

 

Mcspoons, do you have the video link?

[RostokMcSpoons]

Yup, here you go...
 

 

 

[Turtlings]

Ta McSpoons.

 

Conclusive. Fractional difference with many many variables.

[Steveocee]

Bore quality is ultimately the thing that matters most.

[Turtlings]

Ah, a whole new discussion.

[Kls77]

Always ran 6.01 455 or longer with mancraft and was arrow straight with modify flat hop . 

[Turtlings]

Gona run 530mm 6.03 pdik on 95psi with modify grey and custom nub.